XTEMOS ELEMENT
AJAX PRODUCTS TABS
Phase Shift Keying Modulation and Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Phase Shift Keying Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Fixed Output DC Regulated Power Supplies of ±12 V and ±5 V.
2. Built in Carrier wave Generator (Sine Wave) of 5 Vpp, 22 KHz ± 5% Frequency range with output on sockets.
3. Built in Data Generator using IC 7490 with four modulating signal outputs on sockets.
4. IC TL084 & IC 7486 are using for PSK demodulator.
5. Circuit diagram is printed on the milky white top panel and important connections are brought out on the sockets.
Simple Circuits Kit
Description
To explain working of electricity by simple circuits. Students can create simple circuits and learn about electricity, currents, voltages, series circuits and much more. Kit includes: D cell battery holder, knife switch, 2 light bulb holders, 2 light bulbs, 5 alligator connector cords and instructional manual.
Investigation With Mirrors Kit
Description
To Conduct basic experiments on the reflection of light from flat mirrors. The kit shows how adjacent mirrors reflect multiple images and demonstrates the principles of the periscope and kaleidoscope. The unit contains all the materials for the construction of a periscope and a kaleidoscope, including two sets of mirrors, mirror supports, and tubes. With instructions for assembly activity guide.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Screw Gauge Micrometer Demonstration
Insect Collecting Net’ Executive’ (Telescopic)
Pinhole Camera Kit
Thermocouple, Single
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Barlow Wheel
Description
This apparatus spins an electrically charged brass wheel spin, without the aid of a motor. When the wheel electrified by a voltage source (battery), the slotted brass disc sets up eddy currents throughout the structure. This electricity is then attracted to 4 strong neodymium magnets, causing the wheel to spin.
Tool Dynamometers
A machine-tool dynamometer is a multi-component dynamometer that is used to measure forces during the use of the machine tool. Empirical calculations of these forces can be cross-checked and verified experimentally using these machine tool dynamometers.
(1) Milling Tool Dynamometers
(2) Grinder Tool Dynamometers
(3) Lathe Tool Dynamometers
(4) Drilling Tool Dynamometers
Microcontroller Based Distance Impedance Relay Trainer
It consists of many components i. Transmission line module ii. Voltage and current signal conditioners iii.Distance Relay iv. Multifunction Meters
Transmission Line Module
• Total line length - 180Km • Modeled by RL - parameters • Current rating - max 5A • Voltage rating - max 250V ACVoltage and Current Signal Conditioners
• One no of 5A/5V current transformer is provided to read the relay current input • One no of 230V/9V potential transformer is provided to read the relay voltage inputDistance Relay
• One PIC microcontroller used as processor to activate the relay function • One LCD to indicate : - Impedance set value - Current & voltage value - Set time, Relay tripping time • Four numbers of keys are used • Parameters - Current input : 0-5Amps, Voltage input : 0-230V AC - Number of contact: One number of NO contact @ 220V, 10Amp rating - Auxillary supply : 230V AC, 50HzMultifunction Meter
• One MFM provided for measuring input side all parameters (V, I, PF, F, AVR, KW) • One MFM provided for measuring load side line parameters
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
IPM Based Power Module
Power Module is designed for Motor control Applications upto 3 HP by using IGBT & DIODE Technology Based IPM. Input:1 Phase / 3 phase 50 Hz AC. Output : 400V/10A (MAX), AC/DC on each Leg of 3 phase Bridge
FEATURES:
• 1200V, 25A, 3 Phase IGBT Inverter Bridge • 1200V, 10A IGBT for Over Voltage breaking • Built - in Over Voltage, Under Voltage, Over Current & Over Temperature ProtectionADDITIONAL FEATURES:
• 1200V, 25A Converter Bridge for AC-DC power conversion • 4 Nos of Hall Effect current sensors are provided to sense the DC Link current & 3 output current of the Inverter Bridge • 1 No of Hall Effect Voltage sensor is provided to sense DC Link voltage • All the PWM signals are isolated using Opto Isolator • Protection circuit for over current with LED indication • Optically Isolated Fault signal from the IPM is given to the Embedded/DSP controllers for protection. • Independent Power supplies for all Isolated circuits. • 0-900V Voltmeter is provided to Indicate the DC Link Voltage • All current, PWMS & Feedbacks are terminated at Front panel • FRC Connectors are provided to Interface with the Embedded/DSP controllers • All the Input/output Lines are terminated at Banana sockets.
DDS RF Source and Network Analyzer
This unique instrument is RF source upto 1.7GHz with 10 to 400MHz in DDS mode of operation and few Network Analyzer capabilities.
Specification
• It works in two mode of operation. - 10 to 400MHz - DDS operation. - 400 to 1700MHz - PLL operation. • 10 to 1700MHz, RF signal generator. • RF Output Power: 10 to 400MHz, -2dBm, +/-3dB 400 to 1700MHz, -5dBm, +/-3dB. • Harmonics: 10 to 600MHz better than -15dBc 600 to 1700MHz better than -30dBc. • Attenuation: 5dBm, 10dBm, 20dBm, 30dBm. • Fixed and sweep RF signal source. • Direct digital synthesis (DDS) method based. • 100 KHz Channel step size. • AM/FM Modulation. • Automatic Level Control (ALC) incorporated so that, RF level output will be constant. • Graphics LCD display to plot Filter, Amplifier etc., characteristics.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Wheatstone Bridge, Two Gap
Description
Comprising a resistance wire swg 24 stretched along a meter scale subdivided in mms and marked every cm. is clamped to stout brass plates so as to avoid end errors. A plated brass strip with 4 mm socket terminal is fitted along the meter rule to provide a two gap system for normal Wheatstone bridge work. Complete with jockey.
Grinder Tool Dynamometers
This a simple set up to study the various forces resolved during grinding operation, designed by sharp techno system for demonstration purpose for the students undergoing tool desing study. This unit works on octagonal ring method using strain gauge as a sensor. A two channel digital force indicator facilitates to measure both forces simulteniously.
FEATURES:
1.Rigid in construction & compact unit. 2.Assessment of cutting forces by giving due consideration to various parameters like depth of cut, material, speed and feed . 3.Eassy in handling & Digital force indicators to measure two forces simultaneously.SPECIFICATIONS:
1.Mechanical sencing unit with two octagonal rings and strain gauges. 2.Two channel digital force indicator with balancing potentiometers and polycarbonate front plate. 3.Range of force measurement in coordinate direction – 0 to 200 kg. 4.Over all size of mechanical unit – 300 x 300 mm.SERVICE REQUIRED:
1.Necessary surface grinding machine. 2.230 volts, single phase, 50 Hz stabilized power supply.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Sets of metal discs
Description
For demonstrating that some metals are magnetic whilst others are not and for general Metal Identification’ exercises. Comprises sixteen discs, 25 mm. diameter 2 each of Mild Steel, Stainless Steel, Brass, Zinc, Nickel, Silver, Bronze, Aluminium and copper. One of each is stamped with the name of metal. the other is unmarked.
Wheel And Axle, Simple Form
Wooden double wheeled pulley
Consisting of a wooden double wheel with flat-bottomed grooves, 150 and 50 mm diameter respectively.
The wheel is pivoted on a spindle 10 mm diameter which projects for a distance of 100 mm so that the apparatus may be clamped to a normal retort stand.
The apparatus is supplied complete with two hooks and 6 meters of cord but without masses and stand.
Profile Projector 200mm Dia
Specifications
Bench type Profile projector is a highly precision instrument designed for most diversified jobs at industries & engineering colleges. It consists of antiglare hard glass SCREEN 200mm DIA with cross line rotatable through 360 degree with least count of 2 minute an arc. The working table is secured on a heavy hollow base provided with X-Y movement, travel upto 25 X 25 mm ,equiped with zero adjustment Micrometers of 25mm graduation having least count 0.005 mm.
Technical:
| Colour | : | White |
|---|---|---|
| Work Stage | : | 150 mm X 150 mm |
| Magnification | : | 10 X |
| Travel X & Y | : | 25 X 25 mm |
| Micrometer Head | : | 0 to 25 mm with accuracy 0.005 mm/0.01 mm |
| Screen Dia | : | 200 mm, 360 degree rotatable Frosted glass Screen graduated scale. |
| Illumination | : | 12 volt-100 Watt (Counter), 6 Volt-2o Watt (Surface) |
| Power Required | : | 220-230V AC, 50 Hz |
Main Parts of Instrument :
Screen 200mm Dia with Cross Line. Clips to hold Drawing or films. 360 degree rotatable graduated ring. Surface Light Lamp. Objective (Projection Lens). Micrometer Head with least count of 0.005mm X-Y Stage travel upto 25 X 25mm Focusing Knob for up & down motion.
Domestic Refrigerator Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Sieve Shaker Electrical Table Model (Only For 8” Dia Sieve)
Sieve shakers are used to measure particle size as part of your research or quality control applications.
Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.
