XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

francis turbine test setup

DESCRIPTION:

Francis Turbine is a reaction Turbine, which was developed by English born American Engineer Sir J.B. Francis. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy. Thus the water through the runner is under pressure. The runner is completely enclosed in an air tight casing and the casing & runner is always full of water. The present Set-up consists of a runner. The water is fed to the turbine by Means of centrifugal Pump, radially to the runner. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner. The runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. The Set-up is complete with guide mechanism. Pressure and vacuum Gauge are fitted at the Inlet and Outlet of the turbine to measure the total supply head on the turbine.

UTILITIES REQUIRED:

● Water Supply and Drain.
● Electricity 15 kW, 440V Ac, Three Phase

TECHNICAL SPECIFICATIONS:

MODEL HM 101 (1.33 HP) HM 101 (2 HP) HM 101 (5 HP)
Output Power 1.33 HP / 1 Kw 2 HP / 1 Kw 5 HP / 3.75 Kw
Discharge 1000 LPM (Approx.) 1000 LPM (Approx.) 2000 LPM (Approx.)
Supply Head 10 m 10 m 15 m
Rope Brake Dynamometer Dia 200 mm Dia 200 mm Dia 300 mm
Sump Tank Capacity 300 Ltrs. Capacity 300 Ltrs. Capacity 600 Ltrs.
Water Circulation Centrifugal Pump Capacity 5 HP, Three Phase Capacity 5 HP, Three Phase Capacity 15 HP, Three Phase
Speed 1500 RPM (approx.)
Runner Having Curved Vanes
Discharge Measurement Pitot Tube with Manometer
Control Panel Star/Delta Starter, Mains Indicator, MCB for overload protection
The whole set-up is well designed and arranged in a good quality painted structure.

Oscilloscope

This is a portable type of Oscilloscope for two traces. The band width is 0-20 MHz. The instrument is of easy operation with comfortable controls. Its reasonable structure and technology makes it convenient to repair and calibrate. (1) Dual Trace Dual Channel Oscilloscope with Component Test Facility (2) Bandwidth : 20 MHz (3) Full bandwidth sweeping circuit is used in the sweeping system (4) The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals (5) ALT trigger to observe signals from two irrelative channels (6) The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably (7) From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the external frequency counter (8) Y deflection operation : Y1, Y2, ALT, CHOP, ADD, mode X-Y (9) Vertical Deflection : 5 mV / Div to 20 V / Div in factor 1-2-5 sequence in 12 steps (10) Rising time : < 18 nS (11) Maximum Input Voltage : 400V (DC + ACp-p) (12) Triggering Source : Y1, Y2, ALT, POWER, EXT (13) Trigger Coupling : AC / DC (EXT), NORM / TV-H, TV-V (14) Horizontal Sweep Mode : AUTO, TRIG, LOCK, SINGLE (15) Sweep time factor : 0.1 uS / div to 0.2 s / div in 1-2-5 sequence in 20 steps (16) Magnification : x10 (17) X-Y Mode input : X-Axis Y1 and Y-Axis Y2 (18) Z Axis minimum input level : TTL Level (19) Component Test Facility (20) Calibration Signal : Square wave of 0.5 V at 1 kHz (21) CTR Display size : 8 cm x 10 cm (22) Auxiliary Power Supply : 220V 50Hz AC

Prism, Acrylic

Description

90° x 60° x 30°, 75 mm Hypotenuse 90° x 45° x 45°, 75 mm Hypotenuse

Copper Calorimeter, with wooden box

Description

Copper calorimeter of 75 x 50 mm resting on felt pad inside wooden polished box provided with a brass nickel plated thermometer holder and copper stirrer.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Pulleys

Mounted in metal frame, with two hooks and accurately centered alingned. Single Double Double Triple Triple 2 Hooks Parallel Long Parallel Long

Vernier Calipers Digital

Vernier Calipers Digital • Hardened Stainless Steel construction, bright LCD display. • Easy push button Metric English conversion. • Operates on one 1.5V silver oxide battery (included). • Automatic shut off. • 0-150mm x 0.01 mm / 6 inches x 0.0005 In. • Comes complete with foam lined sturdy case, and instructions.

Fertilisation Of Angiosperms

Description

Polygynous type, enlarged 300 times, on board with key card.

Agate Mortar & Pestle

Description

We offer Agate Mortars & Pestles under the brand name of Adarsh International. These Mortars & Pestles are made of naturally occurring Agate Stone, which essentially is an amorphous form of ADARSH. Due to its inherent physical characteristics our Agate Mortar & Pestle it is quite hard. The hardness on the Moh's scale is 6.5. Adarsh Brand Agate Mortars & Pestles are recommended for use in laboratories demanding contamination-free results.

Diameter Sizes

1. Dia 2"
2. Dia 2.5"
3. Dia 3"
4. Dia 4"
5. Dia 5"
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Measuring Cylinder (Round Base)

We are a credible Exporter and Supplier of Measuring Cylinder (Round Base). Measuring Cylinder is laboratory equipment used to measure the volume of a liquid. It is more accurate and precise than laboratory flasks and beakers. Sometimes, Measuring Cylinder is also used to indirectly measure the volume of a solid by measuring the displacement of a liquid. Available in high grade polypropylene or polymethylpentene material, our Measuring Cylinder comes with molded graduations in variegated divisions and capacities. They are transparent and possess optimum resistant against chemical. They have a round base and pouring spout. We make available Measuring Cylinder as per the requirement at the best market prices.
ParticularsPack (Pcs) 
Measuring Cylinder 10 ml24 
Measuring Cylinder 25 ml12 
Measuring Cylinder 50 ml12 
Measuring Cylinder 100 ml12 
Measuring Cylinder 250 ml6 
Measuring Cylinder 500 ml4 
Measuring Cylinder 1000 ml3 
Measuring Cylinder 2000 ml2 

Elastic Properties Of Deflected Beam Apparatus

Apparatus consists of a mild steel beam 2.5cm x 3mm in cross section and 100cm long, pinned to two supports 70cm apart situated symmetrically. One of the ends can be fixed or given a known slope by applying a known moment at the end with the help of suspended loads. At the other end also a known moment can be applied. Vertical loads can be applied at various points along the span of the beam. A dial gauge with 25mm travel (with a magnetic base) may be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights

Petri Dish Rack

We offer comprehensive range of Petri Dish Rack to our valuable clients. These Petri Dish Racks are clear acrylic construction with polycarbonate posts. Our range of Petri Dish Rack has a capacity to hold 60 petri dishes of 90 mm size while Petri Dish Rack can hold 56 petri dishes of 60 mm. Useful during inoculation, incubation & storage, Petri Dish Rack enables the culture to be seen & checked during. Material : Polymethyl Methacrylate / Polycarbonate
ParticularsPack (Pcs) 
Rack For 90 mm Petri Dish2 
Rack For 60 mm Petri Dish2 
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Distillation Water Still (BARNSTEAD TYPE) Table Model S.S

Specifications

This unit has a double wall stainless steel construction and the gap is insulated with glass wool. This device works on 220V AC.

Capacity

8-9 liters per hour Output Capacity 8 to 9 Ltr/Hr. (Approx.) Output Capacity 15 to 16 Ltr/Hr. (Approx.)

Steam Power Plant Trainer

Introduction:

Steam Power Plant Working Unit – This Unit Helps The Students To Understand The Complete System Of A Thermal Power Plat. 1.Heat Energy Converts Water Into Steam 2.Steam Pressure When Moves A Engine Or Turbine Produces Mechanical Energy 3.Finally Mechanical Energy Is Converted Into Electricity Through Alternator

Parts Details Of Boiler:

1.Boiler — For The Generation Of Steam We Have Provided Electrically Heated Boiler. 2.Diameter Of Boiler – 400 mm 3.Length Of Boiler – 600 mm 4.Heater 2 Pcs. – 3 KW (Each)

Bone Cutters

Nickel plated steel, heavy duty construction, with return spring and locking arm, overall length 120mm. Size Bone Cutter, Economy Bone Cutter, Superior
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Test Tube Basket

We are the prominent Test Tube Basket Exporter and Trader, based in India. Our Polylab Test Tube Basket are made up of Polypropylene. These autoclavable, unbreakable and non-corrosive Test Tube Basket are ideal for rinsing and draining glassware. Our Test Tube Basket is also useful for storage of test tubes or culture tubes during sterilization or incubation.
ParticularsPack (Pcs) 
Test Tube Basket 140 x 120 x 110 mm6 
Test Tube Basket 160 x 160 x 160 mm6 

Wire helix (Slinky)

Description :- To illustrate wave motion. Flat section steel wire in helical coil.
75 x 50mm
100 x 75mm

Dead Weight Pressure Gauge Tester

DESCRIPTION:-

Dead weight Pressure Gauge Tester is manufactured to measure the Pressure gauge up to the capacity of 25kg/cm2.The system is nickled chrome to protect from rust. The weights are Zink Iron for long term use.

EXPERIMENTS:-

• Study of the hydrostatic force on a plane surface under different submerged conditions

FEATURES:-

• Superb Painted structure • Simple to operate & maintain

UTILITIES REQUIRED:-

• Machine Oil.

SPECIFICATION:-

• Bourdon tube pressure gauge as manometer • Manometer with transparent scale • Manufactured from corrosion resistant materials • Components arranged on base plate. • Set of weights • Medium for transmitting pressure: hydraulic

Peritoneal Dialysis Simulator

Description

For Continuous Ambulatory Peritoneal Dialysis. Designed to introduce patients, students, and nurses to the essentials of CAPD procedures and care. The realistic torso offers a realistic method to demonstrate and practice peritoneal dialysis. Success with CAPD is dependent on the patient’s following dialysis procedures with extreme care. This Life/form simulator gives the patient an opportunity to gain the confidence necessary for prolonged success with CAPD. Complete with indwelling Tenckh off catheter in a hard carry case. Dialysis materials not included.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture