XTEMOS ELEMENT
AJAX PRODUCTS TABS
Light Dependent Resistor Unit (LDR)
Gear Box Actual Cut Section
Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Aves
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall, Size 75×100 cm. Pigeon External Character Pigeon Internal Anatomy Pigeon Skeleton Pigeon various systems Fowl Skeleton Chick Development Chick embryo 16 Hours Chick embryo 24 Hours Chick embryo 27 Hours Chick embryo 30 Hours Chick embryo 43 Hours Chick embryo 48 Hours Chick embryo 56 Hours Chick embryo 72 Hours Chick embryo 96 Hours Beaks of Birds Claws of Birds Types of BirdsXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Plant Mitosis
Plane Table
Description
The Plane Table Surveying Instruments include standard accessories like Trough Compass, Spirit level, Canvas cover, Plumbing Fork etc., and is also with a fitted tripod. Uses of Plane Table in Engineering Surveys: • Maps preparation • Recording topography Accessories included in Plane Table Surveying Instruments: • Plane Table Board 750 x 600 mm, thickness 22mm & 16mm • Carrying Bag for Board • Teak wood Polished Stand • Stand Rigid Brass Head & Plate, • Magnet Trough compass brass • Spirit Level brass • Sight van 24" • Plumbing Fork • Plumb Bob
Natural Convection Apparatus
The unit consists of a vertical brass pipe heated by a cartridge heater inside it. The pipe looses heat to atmosphere by natural convection. It is fitted in an enclosure to provide undisturbed natural convection currents. Thermocouples are attached on the pipe to measure local temperatures. Heater input is measured on voltmeter and ammeter. Thus students can determine overall heat transfer coefficient and local transfer coefficients in natural convection at various heat transfer rates.
SPECIFICATIONS:
1.Pipe – Brass pipe, 38mm. dia. (OD) 500mm. long, fitted with cartridge heater inside. 2.Thermocouples are fitted along with the length of pipe for Temperature measurement – 7 nos. 3.Enclosure 200mm. x 200mm. x 800mm. size, with one side of Perspex sheet. 4.Measurements & Controls a) A Dimmerstat for heater input control. b) Voltmeter and Ammeter for heater input measurement. c) Multichannel digital temperature indicator. A technical manual accompanies the unit.SERVICES REQUIRED:
1.Bench area of 1.5m x 0,75m. at working height. 2.230v, 5A, AC, electric supply with earthing connection.
Electromagnet
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Pneumatic Trough
We offer Pneumatic Trough to our esteemed clients.
The Pneumatic Troughs offered by us are made of polypropylene, autoclavable and are available in different sizes.
Moreover, the Pneumatic Troughs can be used for a wide range of applications including storage, sterilizing & drying lab ware etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Pneumatic Trough Ø-180 mm x h-60 mm | 6 | |
| Pneumatic Trough Ø-200 mm x h-100 mm | 6 | |
| Pneumatic Trough Ø-250 mm x h-100 mm | 4 |
BOD Incubator
Specification
BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.| Inner Chamber Size | Cap. | Material |
|---|---|---|
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | Aluminium |
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | S.S. |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | Aluminium |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | S.S. |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | Aluminium |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | S.S. |
Optional
Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.
Balance Weights
Catalytic Converter Actual Cut Section
The working of catalytic converter is shown with the help of actual parts assembled on iron base. All the necessary parts of catalytic converter are shown in actual working form. This model helps the student to understand the working of the catalytic converter very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Ball Mill 2kg
It is electrically operated, having a capacity from a few grams to 1kg//2kg/5kg.
It is fitted with FHP motor up to 2Kgs, Jar and with DC heavy duty motor for 5KG. Jar, maximum speed 80RPM supplied with steel balls for mixing and grinding.
Operated on 220V AC Main.
SPECIFICATIONS
Speed: 80 RPM Capacity: 2Kg Motor Type: FHP Voltage: 220V ACFEATURES
No foundations, limited floor space. Low energy consumption. Low maintenance costs.
Tape Measures
Both sides metric or one side metric and other in feet-inches Fiber glass with PVC covering.
Non-conducting, waterproof, washable, and water-resistant.
Case made of zinc-coated steel sheet, covered with vinyl, & fitted with a flush winding handle.
all metal fittings are chrome-plated.
The Tape Measures are provided in size 5 meters, 10 meters, 15 meters, 20 meters, 25 meters, 30 meters.
Crucibles Porcelain Gooch
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Mirror Stereoscope
Prism, Glass
Microtome Razor
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Water Bath Tissue Flotation
Specifications
Double walled round construction. Inner chamber stainless steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80°C. Complete with indicators, wire & plug. To work on 220V AC.Chamber Size In mms (dia x depth)
200x75 250x125
Opthalmic Microscope
Specifications
Double focusing mechanism. Programmable multi-function footswitch. Electromagnetic locks. Suitable for all types of ophthalmic surgery. Space-saving design provides large working area. Easy illumination bulb exchange allows the spare lamp to be immediately rotated into position if the main lamp fails.| Magnification | : | 4.2x –21x | |
| Optics | : | Objective Lens | |
| : | F=200mm | ||
| Zoom | : | Continuous zoom |
Signal Generator
Audio frequency Generator is versatile instrument providing sine, square & triangular wave functions over a wide range from 2 220 KHz in decade ranges. The amplitude of the waveforms can be varied from 20 mV to 20 V peak to peak about zero level with the help of three step coarse control & fine control. The complete unit is enclosed in an attractive metal cabinet.
