XTEMOS ELEMENT
AJAX PRODUCTS TABS
Heart With Arteries Models
Three Step Inductor
Description
This three step inductor consists of a coil of enamelled copper wire wound over an insulated spool. The coil consists of 4 layers of 200 turns each. The tappings at 200, 400 and 800 turns are brought out at 4 mm sockets. The output inductances at these tappings are as follows. No. of turns Resistance 200, Inductor 0.3 mH, Resistance 0.6Ω No. of turns Resistance 400, Inductor 1.2 mH, Resistance 1.2Ω No. of turns Resistance 800, Inductor 5.0 mH, Resistance 2.6Ω. One can easily change the inductor value of the instrument on just inserting a soft iron core inside the bobbin
Rocks And Volcanoes
Ray Box
Description
A ray box consisting of a rugged sheet metal box with a 12 V, 10 W festoon type axially straight filament lamp. Fitted with a cartridge for holding 4 types of slits – single, double, triple and wide slots Ideal for quick adjustment to get the desired ray/beam type Includes colour filters Also included is a convex cylindrical collimating lens for adjusting the beam to obtain long clear tracks which can be parallel, converging or diverging.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Instrumentation Amplifier
Instrumentation amplifier is a switched gain precision operation amplifier. This is used for precise and accurate, low noise differential signal acquisition. 4mm sockets are used for the input signal. It can be interfaced with a wide range of sensors. It can take small voltage changes from a sensor and make those changes large enough to be measured using CRO. It is not able to drive a low impedance load such as a loudspeaker or relay. The output can be read on CRO. Digital multimeter may also be used to read the output. With switched gain of 5 to 1000, it can handle signal inputs over a very wide range making it suitable for almost all applications.
three-phase-flying-capacitor-5-level-inverter-power-module
Specification
• Power circuit consists of 24Nos, 1200V, 20A IGBT with proper heat sink and snubber circuit. • 18 Nos of flying capacitor provided • 6 Nos, Power Diode @ 500v is provided for power circuit • 24 Noshigh speedopto-isolator provided for IGBT PWM inverter. • 24 Nos IGBT gate driver IC provided for IGBT gate driving • 22 nos isolated +15v dc @ 0.5A capacity provided for control circuit • One no of 3phase diode bridge rectifier@1200V, 20A with capacitor provided for input AC-DC conversion • 3 no of Hall Effect current sensor provided for O/P current measurement & protection circuit • 1 no Hall Effect current sensor provided for DC current measurement • Two no FRC connector provided for IGBT PWM input & ADC interface • MCB protection for input power ON/OFF & protection • One no of restart switch and LED provided for protection circuit indication & reset the unit • One Number of analog DC voltmeter provided for DC voltage measurement. • One number of power ON/OFF switch provided. • 3 Phase outputs & 3 Phase inputs are terminated in the front panel. • Test points provided for PWM input and current sensors output
Wireless Connectivity Kit
A Powerful Wireless Connectivity board is designed based on Sitara AM335X Cortex-A8 for detailed and combined study of different Wireless Communications. All in one Wireless Kit contains GSM/GPRS, GPS-GLONASS SBAS (GAGAN), ZIGBEE, RFID, Bluetooth and Wifi on board modules. It supports Linux, WinCE and Android OS Packages which can be used to study different applications like GPS tracking, wireless home and industrial security system, SMS and ZigBee based home application and lighting control and many more.
Features
• TI Sitara AM3354: - ARM Cortex-A8 32-Bit RISC Microprocessor NEON SIMD Co-processor - SGX530 Graphics Engine • DDR3 RAM : 4 GB • NAND Flash : 4 GB • 7” TFT Display Interface • Touch panel (Resistive and Capacitive) interface • On board WLAN (802.11 b/g/n), Bluetooth (802.15) • USB 2.0 – Host, OTG • Serial Interface : UART, SPI, I2C • On board - 10/100MPPS Ethernet PHY • Audio : - Digital Microphone - Multichannel Audio Serial Port (McASP) • Analog to Digital Converter
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Typical Plant Cell
Vortex Shaker (Test Tube Shaker)
Compact Vortex Shaker
Compact, rugged construction. Heavy metal base & rubber feet prevent movement of the shaker during use. Choice of continuous & touch mode. Variable speed control. Include one hand insert, micro tube insert & cup attachment.Product Details
Maximum speed : 3000 rpm Usage : Laboratory Capacity : 600ml
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Genetics
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall, Size 75×100 cm. Monohybrid Crossing complete dominance Monohybrid Crossing incomplete dominance Dihybrid Crossing Monohybrid Crossing Mendelian explanation of Cross between tall & dwarf races in Garden Pea Sex linked inheritance Drosophila Mendelian Heridity of Blue & Adulsian fowls Mendelian Explanation of the breeding behaviour of Red & White flowering in 4 o’clock
Sliding Mesh Gear Box
Sliding Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Power Steering Trainer System Actual Working
Power Steering Trainer System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Microwave Integrated Circuit Trainer
This trainer is used to study Microstrip components and its characteristics. A useful trainer to get hands on experience on Microstrip components and instrument. We offer Three solutions.
1GHz RF Source with Detector
• Frequency Range : 0.05 to 1GHz. • Resolution : 100KHz. • Automatic Level Control (ALC) RF Detecter& Directional coupler provided for many RF measurements. • Output Impedance : 50 Ohm.1GHz Micro Strip Component
• Ring Resonator. • 3dB Power divider. • Direction of Coupler.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Tuning Fork Activator
Leaf Anatomy
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Multi Process Trainer
Features
• Pressure transmitter mounted at the bottom of the process tank • Flow transmitter (DPT) with rotameter mounted across the pipe line to sense the flow of water • Temperature sensor of (RTD) type mounted at the outlet of the heater • An industrial type heater as a heat source • FHP pump for water Circulation • SS Storage tank of 15 liters Capacity • Power driver provided to vary the pump speed and Heater Power. • Orifice plate is used for pressure drop measurement. • An electronic signal conditioner is provided. • Bourdon tube pressure gauge is provided to measure the tank. • Latest power driver is used to drive the pump & heater. • USB/Serial port data acquisition is provided.
Turbine/Pump Unit
Description
For use as a water turbine to drive a generator producing electricity or for use as a pump driven by a motor and raising a head of water to produce potential energy. The rotor has eight 'bucket' blades and is housed in a block turbine chamber with a clear Perspex front. Two inlet tubules (for turbine and pump operation respectively) and one outlet tubule are provided and the shaft carries a 15 mm. diameter pulley. With driving belt.
DNA Model on Stand
Description
(Deoxyribonucleic acid) Model showing segment of D.N.A. molecule mechanism of replication, to show the double helix coiling and reforming, nucleotide and the structural formula to show the molecular shapes and bonds and angles distorted. Complete model arranged on a board, fully labeled.
Bernoulli S Theorem Apparatus
DESCRIPTION:-
The Set-up is designed to verify Bernoulli’s Theorem experimentally. Set up consists of a one piece clear acrylic test section with convergent and divergent part section, supply tank, measuring tank, inlet water tank and pump for closed loop water circulation. The test section is connected to Piezometer tubes through pressure tapping at different locations on the section to demonstrate the Bernoulli’s Theorem. The flow rate of water is measured using measuring tank and stop watch provided.EXPERIMENTS:-
Ø To verify Bernoulli’s Theorem experimentally.FEATURES:-
Ø Clear test section Ø Closed loop water circulation Ø Compact & stand alone setup Ø Stainless Steel tanks and wetted parts Ø Superb Painted structure Ø Simple to operate & maintainUTILITIES REQUIRED: –
Ø Electricity Supply: Provide 230 +/- 10 VAC, 50 Hz, Single Phase electric supply with proper earthing (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump Ø Water Supply : Tap water connection ½ “ BSP, Distilled water @ 60 Ltrs. (Optional)TECHNICAL SPECIFICATION: –
Ø Test Section : Material Acrylic, Size Ø Inlet Tank : Capacity 20 Liters., Stainless Steel Ø Supply Tank : Capacity 70 Liters., Stainless Steel Ø Measuring Tank : Capacity 20 Ltrs. Fitted with Piezometer Tube & Scale Ø Piezometer Tubes : Material P.U. Tubes (9 Nos.) Ø Pump : FHP Capacity make Tullu/Crompton Graves Ø Piping : GI / PVC Size BSP Ø Stop Watch : Electronic Ø The whole Set-up is well designed and arranged in a good quality painted Structure.
Round Bottom Centrifuge Tube
Avail from us, a flawless variety of Round Bottom Centrifuge Tube , which is popular for its better quality and precise engineering.
Being one of the chief Exporter and Trader in this industry, the company provides Round Bottom Centrifuge Tube at the most competitive prices.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Centrifuge Tube Round Bottom 16 ml (P.P) | 50 | |
| Centrifuge Tube Round Bottom 50 ml (P.P) | 50 | |
| Centrifuge Tube Round Bottom 16 ml (P.C) | 50 | |
| Centrifuge Tube Round Bottom 50 ml (P.C) | 50 | |
| Cap for 16 ml Centrifuge Tube Round Bottom | 100 | |
| Cap for 50 ml Centrifuge Tube Round Bottom | 100 | |
| Oak Ridge Centrifuge Tubes 30 ml | 12 | |
| Oak Ridge Centrifuge Tubes 50 ml | 12 | |
| Oak Ridge Centrifuge Tubes 100 ml | 12 |
