XTEMOS ELEMENT
AJAX PRODUCTS TABS
Hand & Table Microtome
The Hand & Table Microtome is used to cut thin sections of Microscopic materials, such as specimen parts of plants and animals.
It is Considered as the basic form of a microtome permitting microtomic cuts by hand in a quick and accurate way.
The microtome is suitable for practical courses in microscopy, for field work during excursions, for school education and for a serious amateur of biology.
Petri Dish
These Petri Dish offered by us is clear, unbreakable, & autoclavable.
The PS Petri Dish with fitting proves excellent for culture exp.
Made in polystyrene, this transparent Petri Dish provides an excellent inside view.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Petri Dish 50 mm | 36 | |
| Petri Dish 75 mm | 36 | |
| Petri Dish 100 mm | 36 | |
| Petri Dish 125 mm | 12 | |
| Petri Dish 150 mm | 12 | |
| Petri Dish (Culture) | 12 |
Angel Sum Property of Quadrilateral
St. Louis Motor Demonstration
Description
Students can explore how a simple electric motor works by doing a series of investigations. This St. Louis motor can be adjusted so students can study the effect of voltage and position of the brushes on the commutator. The motor consists of a two pole DC armature. The brush holder, with two heavy binding post terminals, can be rotated for experiments. The permanent bar magnets, supported by clamps, can be adjusted to the desired location. This apparatus requires 4 D cell batteries with holder (not included) or a power supply and two connecting leads (not included).XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Trans-Ratio
Description
Trans-Ratio is a simple transformer system that allows students to investigate the relationship between primary voltage, secondary voltage and the turns ratio. The Primary coil has tappings at 200, 400 and 600 turns while the Secondary has 100, 200, 300, 400, 500 and 600 turns all brought out to 4mm sockets. An AC supply of upto 6 V as well as AC voltmeters are required for demonstration purpose.
Bulk Density Apparatus
Newton’s Colour Disc, Motor Driven
CNC Lathe Trainer Slant Bed
CONTROLLER:
Type of control system : PLC based system Axis motor and drive : Servo motor & drive with feedback Input ti servo : Optically lsolated Motor Drive : TTL compatible Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Cycles : Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : providedMACHINE DETAILS:
Center Height : 100mm Swing over Carriage : 80mm Distance between Centre : 825mm Weight : 700kg Dimension in mm : 1250 x 900 x 1500 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron (Dia.) Automatic Lubrication : provided Tool Changer : Automatic – 8 stationSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 2HP Inside Taper : MT3 Speed Range : 100 to 3000 RPMAXIS TRAVEL:
X Axos : 100mm Z Axis : 300mmXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Bar Breaking Apparatus
Description
To show the forces which can be exerted during thermal expansion or contraction. Comprising a heavy cast iron frame 340x120x100mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.
Gynecological Examination Model
Description
Gynecological Simulator is ideal for all aspects of gynecological education, training and competency evaluation, including the bimanual exam, speculum exam, and cytology sampling. Students will appreciate the unprecedented realism of its internal and external features, while instructors will love the interchangeable components that make up its unique modular system. This simulator allows you the flexibility of customizing your scenarios with use of included makeup, blood, and thickener. Additional specialized modules are also available (STD, post-menopause, S.A.N.E., and pre-puberty). Starter unit includes torso, normal genital pad, normal pelvic organ block with vagina and rectum, abdominal gel pad, fabric abdominal pad, abdominal overlay skin, seven uterus/cervix pieces (normal/normal with discharge option, retroverted/cervicitis, cancer/cancer, transparent IUD trainer, post-menopause/herpes, fibroids/polyp, early pregnancy), five detachable ovaries (normal, polycystic, small cyst, large adnexal mass), bladder insert, pelvic organ prolapse insert, baby powder, Injury Shades Makeup Wheel, Primary Colors Makeup Wheel blood mix, hydroxyethyl cellulose thickener, syringe, lubricant, instruction manual, and hard carry case.
Centrifugal Blower Test Rig
The apparatus consists of a spiral casing, which houses an impeller. Impeller is driven by a variable speed D.C. motor. Three, interchangeable impellers, viz. Radial forward and Backward curved vanes are provided with the unit. Digital indicators are provided for speed of impeller. A venture provided measures the discharge. Thus students can evaluate the performance of different impellers at various speeds.
SPECIFICATIONS:
1.Blower – Spiral casing with three interchangeable impellers viz. forward, backward and radial vanes. 2.Drive Motor-1 HP DC motor, 3000 RPM with Dimmer control to vary the speed from 300 to 3000 RPM. 3.Digital Speed indicator for speed measurement. 4.Ventura with water manometer to measure air flow. 5.Water manometer to measure discharge pressure. 6.Discharge pipe with flow control valve. 7.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor space of about 2m X 1.5m X 1.5m height. 2.230 V. 5A., 50 Hz, AC Supply.
Smart LED Lighting module
Zigbee offers Green and Global Advanced Wireless Technology, Connecting the widest range of Devices to work together intelligently and help you to control your real world. CC2530 is the first System On chip, which has integrated 8051Microcontroller with ZigBee RF transceiver. A WSN based Smart LED lighting module has been developed with latest LED controller from MICREL, 10 LEDs, ZigBee RF module using CC2531 for Wireless Control with onboard Light Sensor. WSN based LED lighting module has a Base Board and a Zigbee RF module. Zigbee RF module can be plugged into the connector provided on the Base Board, meant for further upgradation.
Features
• 10 Nos. of LED of 2watt each • 400 milliwatts LED • Constant current driver for LED control • Connectors for plug-in Zigbee RF module • Remote ON/OFF control by Zigbee RF Control • On board light intensity sensor • LED Brightness control either by program or by Light Sensor input.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Laboratory Stirrers
We offer comprehensive range of Laboratory Stirrers for our esteemed clients.
Made of polypropylene, these Laboratory Stirrers are very useful for stirring different solutions in the laboratory.
Our range of Laboratory Stirrers proves to be tough and long lasting.
Our buyers can avail these Laboratory Stirrers at highly affordable price range.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Stirrer Ø-10 mm x h-250 mm | 12 | |
| Stirrer Ø-6 mm x h-150 mm | 12 | |
| Stirrer Ø-7 mm x h-200 mm | 12 | |
| Stirrer Ø-7 mm x h-250 mm | 12 | |
| Stirrer Ø-7 mm x h-300 mm | 12 |
SAFETY GOOGLES
PRODUCT DESCRIPTION
- Economical goggle offers indirect venting and anti-fog coating for reduced fogging
- Polycarbonate lens absorbs 99.9 percent UV
- Meets the high impact requirements of ANSI Z87.1-2010 Standard
- Sturdy polycarbonate lens wide opening to fit over prescription eyewear
- Protective splash goggle clear lens
Digimatic Micrometers ( DMM 01)
Description
Micrometer is used to measure short lengths accurately Technical Details : With Friction Thimble Carbide Tipped Measuring Faces Blue Metallic Finish Frame With Locking Clamp and ratchet stop Least Count : 0.001mm Sizes 0-2 25-50 50-7 75-100 Specifications: Guarante6 Months without abuse Packin Plastic Box Calibrati In house.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Matt White Screen
Helmholtz coils
Description
Helmholtz Coils are a special arrangement of coils that are placed in such a way as to generate a very uniform magnetic field between them when a current is applied. The strength of the magnetic field is proportional to the number of turns in the coils and the current applied to them. The Helmholtz Coils setup consists of two field coils mounted on a track to provide a uniform magnetic field between the coils. The proper separation for Helmholtz coils is marked on the track. A pair of precision coils and 400 turns of wire are wound on heat resistant former of about 150 mm diameter.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Electro Mechanical Type Over Voltage Relay Study Trainer
This test set-up consists of a. Electromechanical over voltage-relay. b. Relay test setup with meter.
Electromechanical over voltage-relay
• One electromechanical type over voltage relay - Make: Megawin - Voltage setting multiplier (121V, 132, 143, 154, 165, 176, 187V) - Time setting multiplier. - One “NO” contact @ 220V, 10Amp rating. - One “NC” contact @ 220V, 10Amp rating. b. Relay test setup with meter • One 0-300V, 1AMP variable AC source provided for relay coil. • One auto transformer provided for AC voltage adjustment. • One illuminated rocker switch provided for power ON/OFF. • One digital voltmeter used to indicate applied voltage. • One digital timer provided for relay tripping time measurement. • One automatic relay tripping time measurement circuit. • One start/stop push-to on switch provided for time measurement circuit. • One reset switch provided for timer reset.
Demonstration Dynamo
Description
This model uses the same basic assembly as the motor, but is mounted on a baseplate 230 x 90 mm approx. which also carries a hand-drive pulley 120mm. diameter coupled to the smaller dynamo pulley by a rubber belt to give a step-up ration. Electrical output is via a pair of 4mm sockets. The model may also be used as a motor on a 6-8 V D.C. supply.
Digit Counter Micrometer (DCM)
Description
Micrometer is used to measure short lengths accurately Technical Details : Printed Marking on the Vernier Scale Carbide Tipped Measuring Faces Blue Metallic Finish Frame With Locking Clamp and ratchet stop Least Count : 0.01mm With Digit Counter to withstand abuse at work Sizes : 0-2 25-5 50-7 75-100 Specifications: Guarantee ; 6 Months without abuse Packing ; Plastic Box Calibration ; In house.
Ni Cad Battery Investigation
Description
This setup is designed to investigate the charging and discharging characteristics of typical re-chargeable batter with external voltmeter and ammeter connected, you can manually measure the input and output energy by taking reading from these meters. A toggle switch is provided to select between charging and discharging. Connection are made via 4 mm plugs.
Centrifugal Blower Test Rig
The apparatus consists of a spiral casing, which houses an impeller. Impeller is driven by a variable speed D.C. motor. Three, interchangeable impellers, viz. Radial forward and Backward curved vanes are provided with the unit. Digital indicators are provided for speed of impeller. A venture provided measures the discharge. Thus students can evaluate the performance of different impellers at various speeds.
SPECIFICATIONS:
1.Blower – Spiral casing with three interchangeable impellers viz. forward, backward and radial vanes. 2.Drive Motor-1 HP DC motor, 3000 RPM with Dimmer control to vary the speed from 300 to 3000 RPM. 3.Digital Speed indicator for speed measurement. 4.Ventura with water manometer to measure air flow. 5.Water manometer to measure discharge pressure. 6.Discharge pipe with flow control valve. 7.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor space of about 2m X 1.5m X 1.5m height. 2.230 V. 5A., 50 Hz, AC Supply.
Wheel And Axle, Simple Form
Wooden double wheeled pulley
Consisting of a wooden double wheel with flat-bottomed grooves, 150 and 50 mm diameter respectively.
The wheel is pivoted on a spindle 10 mm diameter which projects for a distance of 100 mm so that the apparatus may be clamped to a normal retort stand.
The apparatus is supplied complete with two hooks and 6 meters of cord but without masses and stand.
