XTEMOS ELEMENT
AJAX PRODUCTS TABS
Small Dental Care Model (28teeth), PVC
Critical Heat Flux Apparatus
The apparatus demonstrates the regimes of pool boiling. The test section consists of a test wire surrounded by water of constant temperature. The surface temperature of the test wire is heated by passing current through it. Due to the temperature difference between the wire surface and surroundings, the difference regimes are observed till the burnout point.
Specifications:
1.Test wire -35 gauge or 40 gauges. Length = 10cm. 2.Nichrome heater- 1 kw capacity – 1 nos. 3.Glass trough of sufficient capacity. 4.Table light to observe the test wire. 5.Voltmeter and ammeter to measure the input to the test wire. 6.Dimmerstat to adjust the voltage. A technical manual accompanies the unit.SERVICES REQUIRED:
1.220v, ISA, stabilized single-phase supply. 2.Floor surface- 1m x 1m at working height.
Storage Vial
These polypropylene vials add to the existing range of Polylab storage vials.
Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring which makes it a leak proof vial.
These vials are also used for the storage of biological material, animal & human cells etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail 2.0 ml | 500 | |
| Storage Vail 5.0 ml | 500 | |
| SV - 10 ml | 500 | |
| SV - 5 ml | 500 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Leopold Maneuvers Simulator
Description
One piece fetal baby with palpable fontanelles, spine, shoulders, elbows, and knees Fetal baby may be placed in normal, breech, or transverse position Fetal baby cradled between two “cushions” Cushions may be inflated independently of the other; inflation of the lower cushion raises the fetus to desired position; inflation of the upper cushion creates a firm abdomen as in the ninth month of pregnancy The Palpation Module is designed to be used with the Advanced Childbirth Simulator.
Fuel Supply System Of A 4 Cylinder Diesel Engine
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Multi Tank System
Panel Features
• Rocker switch is provided to ON/OFF the process plant. • Digital Panel Meter. • Pump Indicator. • Short Circuit protection. • Mimic diagram in the panel. • All the electrical connectors are terminated in the panel.Features
• This equipment consists of four tank system, conical tank system and spherical tank system. • Four numbers of Acrylic tank are provided for doing multivariable control of four tank system. • Conical tank (SS) is provided to performing the nonlinerar control system. • Spherical tank (SS) is provided for controlling the complex system. • Six numbers of level transmitter (DPT) are provided to measures the level of the each tank. • Three numbers of smart control valve with positioner are provided in the inlet of Flow rate. • Hand valve is provided at the bottom of the process tank to study the load disturbance. • Three numbers of hand valve are provided to control the Rotameter flow rate. • Three numbers of centrifugal pump are provided for water circulation. • Two flow transmitters are mounted for conducting flow, cascade and Ratio control. • Appropriate Digital panel meters are provided to measure the transmitter and actuator signals. • Delay coils are provided to the input of the process tanks for transportation lag study. • Storage tank of 100 litre capacity (SS). • Rotameter for Visual indication of the flow rate. • Relay circuit is provided to ON/OFF the solenoid valve. • Built in regulated power supply. • All Water flow lines are connected by (SS) fittings. • Necessary patch chords are provided for interfacing the Electrical signal. • Established successful design that mimics a real industrial process. • Front panel includes mimic diagram of the process, so students can clearly see what they are controlling. • Safe, practical and realistic. • Hand valves are provided to study the coupling (Interaction) and decoupling
DDS RF Source and Network Analyzer
This unique instrument is RF source upto 1.7GHz with 10 to 400MHz in DDS mode of operation and few Network Analyzer capabilities.
Specification
• It works in two mode of operation. - 10 to 400MHz - DDS operation. - 400 to 1700MHz - PLL operation. • 10 to 1700MHz, RF signal generator. • RF Output Power: 10 to 400MHz, -2dBm, +/-3dB 400 to 1700MHz, -5dBm, +/-3dB. • Harmonics: 10 to 600MHz better than -15dBc 600 to 1700MHz better than -30dBc. • Attenuation: 5dBm, 10dBm, 20dBm, 30dBm. • Fixed and sweep RF signal source. • Direct digital synthesis (DDS) method based. • 100 KHz Channel step size. • AM/FM Modulation. • Automatic Level Control (ALC) incorporated so that, RF level output will be constant. • Graphics LCD display to plot Filter, Amplifier etc., characteristics.
Prostate Inspection Model
Description
This model provides prostates with tumors in 4 different development periods. The 1st development: Beginning, a little big but the prostates still works well. The 2nd development: Some hard tubers can be served in the top right quadrant of prostate. It's the beginning of the tumors. The 3rd development: The tumor is proliferating, and the previous tubers become bumps. The 4th development: The prostates is all replaced by tumors, the surface become more rough and harder than before.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Leaf Area Meter
Description
Leaf Area Meter We have been affianced in offering an exclusive collection of Leaf Area Meter which is used to obtain measurements of leaf area without detaching the leaf from the plant. The offered meter is manufactured with the use of high grade components and latest tools in order to meet the set industry standards. These are extensively used for conducting various tests and studies on the leaves of a tree.
Post Office Box, Plug Type
Lenses, Set of Six
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Atomic Model Set
We present to you, Atomic Model Set.
The Atomic Model Set consists of moulded balls of different colors & sizes along with connectors of different sizes.
The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards.
Material : Polystyrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Atomic Model Set - Senior Set | 1 | |
| Atomic Model Set - Junior Set | 1 | |
| Atomic Model Set (Euro Design) - Student Set | 1 | |
| Atomic Model Set (Euro Design) - Teacher Set | 1 |
Metacentric Height Apparatus
DESCRIPTION:-
A pontoon is allowed to float in a small tank having a transparent side. Removable steel strips placed in the model for the purpose of changing the weight of the model. Displacement of weight is measured with the help of a scale. By means of a pendulum (consisting of a weight suspended to a long pointer) the angle of tilt can be measured on a graduated arc. For tilting the ship model, a cross bar with two movable hangers is fixed on the model. Pendulum and graduated arc are suitably fixed at the center of the cross bar. A set of weights is supplied with the apparatus.EXPERIMENTS:-
Ø Determination of the Metacentric height and position of the Metacentric height with angle of heel of ship model.TECHNICAL SPECIFICATION: –
Ø Pontoon : Size 300 x 150 mm (Approx.) with a Horizontal Guide Bar for aliding weight. Ø Material : Stainless Steel Pontoon Ø Water Tank : Size 600 x 400 x 400 mm (Approx.) Ø Front Window of Tank : made of Glass/Perspex Ø A set of weights is supplied with the apparatus. Ø The whole Set-up is well designed and arranged in a good quality painted Structure
Counter Tiles
Packaged in a clear storage container, use these 1" X 2 mm. thick plastic tiles in five colors to build models of math concepts, develop basic arithmetic skills and explore color and number patterns. Color tiles are effectively used to help children understand spatial reasoning and mathematical concepts like probability, algebra and graphing.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Open Pit Mine Model
Description
Open pit mining often results in a large hole or pit being formed in the process of extracting a mineral. Deposits mined by open pit techniques are generally divided into horizontal layers called benches. The thickness of the benches depends on the type of deposit & the mineral being mined. Mining is generally conducted on a number of levels at any one time.
Westminister Electromagnetic Kit
Description
A very effective and motivating learning aid in elementary electromagnetism. Consists of 8 anisotropic alloy magnets, 8 ceramic ferrite magnets, 4 steel magnet yokes, 6 plotting compasses, 4 hardboard formers to take compasses, 1 bottle iron filings 250 gm, 4 dispensers for iron filings , 4 double C-cores, 4 clips for C cores, 4 Aluminium rings, 4 Aluminium split rings, 4 armatures with axle tubes, 4 Aluminium axle rods, 8 split pins, 16 rivets, 4 formers for coils, 4 reels cello tape, 4 reels copper wire, 4 sheets white pasteboard, 4 plain postcards, 4 reels white cotton thread, 1 length latex rubber tubing, 4 each resistors 100 ohms and 10 ohms, 4 support bases, 10 MES bulbs, 8 MES bulb holders,1 wood clamp and 1 wooden block. With instructions.
Light Reflection and Refraction Set
Description
This optical kit helps students easily study these two important wave properties: Reflection and Refraction. Set made up of a wooden and rotating platform. base triangular stand made up of a disc and a rotating arm. The rotating platform provides a high degree of accuracy when making measurements as well as provides an easy way to change angles without disturbing the light source.
COPLIN JAR FOR 5 SLIDES
PRODUCT DESCRIPTION:
This popular staining jar has heavy glass walls and a broad base for increased stability. It holds five single 3" x 1" (75 mm x 25 mm) slides vertically, or 10 slides back to back, and requires low reagent volume (approximately 65 mL). Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 90 mm D.
PLC-SIE2 with Demo Panel Training Kit
This trainer consists of PLC, Demonstration Panel & Programming Software.
PLC Specification
• Make : SIEMENS • Model : CPU1212C • Digital Inputs : 8 Nos • Digital Outputs : 6 Nos • Program Memory : 24KB • Data Memory : 10KB • PLC to PC interface : PROFINET • PWM & HSC channels provided • Windows based programming software providedPanel Specification
• SPDT switches provided for Digital inputs • LEDs provided with fuse protection for Digital outputs • Inbuilt 24V DC power supply provided • Connectors provided for external interface applications
Steering Geometry Wheel Alignment Trainer
Steering Geometry & Wheel Alignment Trainer
With the help of this trainer the students can learn about steering geometry and practically perform wheel alignment using various tools.
(A) Turn Tables
(B) Toe In Toe Out Gauge
(C) Magnatic Caster Camber Gauge
(D) Manual Steering System With Four Wheels
(E) Tool Kit
