XTEMOS ELEMENT
AJAX PRODUCTS TABS
Regular Panel Meter, Large Size
Angel Sum Property of Triangle
CRUCIBLE TONG (STAINLESS STEEL)
LPC 2148 Development Kit
ON Chip Features
β’ CPU - LPC2148. β’ Core - 16/32 Bit ARM7TDMI-S. β’ Speed - Max 60 MHZ. β’ Flash - 512KB. β’ RAM (on-chip) - 40KB. β’ 46 x General Purpose I/O Pins. β’ USB2.0 Full speed Compliant Device. β’ One 10bit ADC with 14 Analog inputs. β’ One 10bit D/A Converter. β’ Two 32bit Timers/ External Event Counters. β’ Low Power Real Time Clock. β’ Six PWM & Watchdog. β’ Two UARTS (16c550). β’ Two Fast I2C (400Kb/s) Module.On-Board Features
β’ Two Digital output. β’ Two Digital input. β’ 10 base T Ethernet Interface. β’ USB 2.0 Connectivity. β’ SD Card Interface. β’ 16 x 2 character LCD Interface. β’ 2 Analog Inputs are Terminated at Potentiometer. β’ RS232 lines are terminated at 9 pin D-type connector. β’ CPU lines are terminated at 20 pin connector.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Needle Stand Magnetic
Survey Chain
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Analgesiometer Tail Flick
Analgesiometer Tail Flick (Radiant Heat or Tail Flick Type): It provides pain stimulus by heated nichrome wire in a Rat's tail to determine analgesic effect of drugs.
Complete with one spare element to work on 220 A.C.
Features
Shutter operated lamp illumination system. Automatic or manual mode for detecting tail flick. Precise and reproducible results. PC Connectivity with software. Software with calibration and report generation feature. Software with auto experiment number and serial number feature. Software with provision to convert data in excel or pdf. Cut off timer to avoid damage to animal. Calibration mode using Heat Flux meter (optional device).
Water Bath Recangular Type
Specifications
It is a double walled unit inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. Concentric rings can be removed to accommodate containers of various sizes. Temperature from ambient to 100Β°C is controlled by Hydraulic capillary type thermostat with accuracy of Β± 1Β° C . Workable on 220V AC 50Hz Single Phase.| Chamber Size In mms | Holes | Cap. (Aprox.) |
|---|---|---|
| 300x250x100 | 6 holes of 75 mm | 8 L |
| 355x405x100 | 12 Holes of 75mm | 15 L |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Plant Mitosis
Reciprocating Compressor Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Test Tube Support 13 place, Wooden
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Ballistic Galvano Meters
Description
Used for measurement of small quantities of electrical charge. Levelling Screws for balancing the coil. Coil with mirror suspended between long suspension at the upper end and a spring at lower end. Clamping arrangement for transportation. Consistent sensitivity over a large period. Strip provided for making it a periodic. Res. in Ohm Crit. Damp. Res. in Ohms Sensitivity mm per m Coul. Sensitivity mm per m Amp. Time period in Seconds.| 100 | 300 | 1000 | 12 | 2000 |
| 500 | 600 | 1400 | 12 | 3500 |
Resistance Substitution Board
V.D.R.L.Rotator (Variable Speed)
Suitable for VDRL and other agglutinating tests, blood grouping tests, for mixing of solutions in small flasks, beakers or bottles.
Platform size 300x300 mm. supplied with spring wire holder (2 nos) for holding flasks. Fixed or variable RPM range 180 RPM. with 60 min timer.
Workable on 220 v AC 50Hz single phase.
Optional
Digital R.P.M. indicator Digital timer (0-99 min.)XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Baby Weighing Balance
A single beam scale, robust steel body with epoxy powder coated parts.
The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each.
One hanger and one slotted mass is provided to increase the capacity of the balance.
When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg.
On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg.
The tray is detachable and can be easily replaced in position by sliding on to fixed plate.
Second scale is provided which reads 0 to 1 kg in division of 10 gms.
Making the total capacity of balance 16 kg in to 10 gms.
Demonstration Gear Model System
Description
A series of models to demonstrate different gearing systems. With transparent slideplates, the gears may easily be seen and where necessary there is an index on the primary and secondary shafts to show the change in the direction of rotation and the relative speed of rotation. A simple three-speed and reverse-gear system using spur gears. Reverse gear is obtained by interposing a small lay-shaft mounted pinion between the two main shafts. Gear selection is by means of a short ball-ended lever.
Lagged Pipe Apparatus
Lagged Pipe Apparatus:
The apparatus consists of three concentric pipes mounted on suitable stand. The space between innermost and the middle pipe is fifed with a lagging material and the space between the middle and the outer most is filled with and other lagging material. The lagged pipe is heated with a cartridge heater inserted at the axle length of the pipe. Voltmeter and ammeter on the panel can measure the input to the heater. The intermediate temperatures can be measured by the thermocouples attached at the surfaces of the pipe. Thus the resultant conductivity of the materials can be found out.
SPECIFICATIONS:
1.Pipes : a)Gl pipe (innermost) β 6 cm. (Outer Diameter). b) Gl Pipe (Middle) β 8.5 cm. (Mean Diameter) c)G! Pipe (Outermost) β 10.7 cm. (inner Diameter) d)Length of pipes 1 Meter. 2.Heater : Nichrome wire cartridge heater placed centrally, of suitable capacity. 3.Control Panel : a)Single Phase Dimmerstat β 1 No. b)Voltmeter (0 β 250V) β 1 No. c)Ammeter (0- 2A) β 1 No. 4.Temperature Indicator : Multichannel Digital Temperature Indicator ranging (0 β 300 C) using Cr/AI ThermocouplesServices Required:
1. A.C. Single Phase 230 V electric supply 2. Floor Area-1.5 Meter X 1 Meter X 0.5 Meter High
Xilinx Spartan 3E FPGA Trainer Kit
Specification
β’ XC3S250E - 4PQ208C / XC3S500E-4PQ208C β’ 16 Nos. of digital input using slide switches with LED indication β’ 16Nos. Of digital outputs using discrete LEDs β’ 16 x 2 LCD is provided for display the text message. β’ One Reset Switch β’ One switch is provided for giving manual clock β’ FPGA configuration through - JTAG Port - On board Flash Prom XCF02S β’ Total 158 I/O pins : 124 pins used for integrating peripherals like LED, Switches etc., balance pins available to user in 20 pin β’ header (3.3V compatible) β’ 1No of 26pin header to interface VLIM cards like Traffic Light Controller (5V compatible) β’ On board programmable PLL oscillator from 1 MHz to 100 MHz using jumpers β’ 4 Nos of 7 segment LED display β’ One relay and Buzzer provided. β’ Stepper & DC motor Driver provided. β’ 4 * 4 matrix key provided β’ Housed in a sleek plastic cabinet with built in SMPS 5V/2A. β’ Compatible with Xilinx ISE Design Suite WebPACK Software. β’ On board USB to JTAG is available for configure FPGA (Supports only with Vi JTAG 5.0 Software)
Sieve Shaker (Gyratory Motion)
Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan.
This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch).
Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil.
Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized.
This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.
| Product: | Gyratory Sieve Shaker | |
| Capacity: | 7 sieves of 150mm, 6 sieves of 300mm | |
| Design: | Table Top | |
| Construction: | Cast Iron, Painted Mild steel | |
| Motor: | ΒΌ HP | |
| Timer: | 0 - 60 Minutes | |
| Timer Type: | Digital / Analog | |
| Power Supply: | 220 Volts |
Storage Vial (Internal Thread)
We provide high quality range of Storage Vial.
An addition to the range of storage vials, is this vial which has internal thread in it.
The cap fitted with O-ring screws in to the vial and makes it a leak proof storage vial.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail - Internal Thread 2.0 ml | 500 |
