XTEMOS ELEMENT
AJAX PRODUCTS TABS
Screw Gauge Micrometers
Electronic Total Station
Signal Generator, Digital
This signal generator is a useful test instrument capable of generating multiple waveform and offers excellent waves shape, signal linearity, waveform symmetry and frequency range with selection of sine, triangular and square wave and amplitude variable 10 V peak to peak. 1 Hz to 100 kHz in five decade ranges selected by rotary switch named as frequency multiplier. Sine, triangular and square waveforms selected by push switch with LED indication. Output signal is 0 – 3.5 Vrms (10 V peak to peak) open circuit continuously control with uncalibrated amplitude control knob. Mains rocker switch with indicator Light. Signal Generator is versatile for general laboratory use; output signal is adjustable with the combination of frequency multiplier and set frequency dial with a low level of distortion. Set frequency is displayed on a 4 seven segment display. Output Voltage is continuously variable with selector range 1 V and 10 V.There is two pair of output safety sockets. One for CRO output (experiment for amplification, filter etc.) and another pair of sockets to speaker to drive a speaker and to demonstrate the audio signal frequency range 20 Hz to 20 KHz.
Sets of metal discs
Description
For demonstrating that some metals are magnetic whilst others are not and for general Metal Identification’ exercises. Comprises sixteen discs, 25 mm. diameter 2 each of Mild Steel, Stainless Steel, Brass, Zinc, Nickel, Silver, Bronze, Aluminium and copper. One of each is stamped with the name of metal. the other is unmarked.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Coplin Jar
Refrigeration Trainer Domestic Type
The unit enables students to study the various parameters affecting the performance of a domestic refrigerator. It consists of refrigeration cycle of domestic refrigerator, it consists a hermetically sealed compressor, air-cooled condenser, capillary tube and a natural convection type evaporator. The evaporator is fitted with a small heater to simulate different load conditions various measurements are provided so that power consumption, COP, theoretical and actual refrigerating effects refrigerant flow rate and effect of door opening on power consumption can be studied and also students can visualize automatic operation of unit using a thermostat.
SPECIFICATIONS:
1.Compressor – Hermetically sealed, Kirioskar make having capacity of approx. 1/25 ton of refrigeration. 2.Air – cooled condenser with natural convection airflow. 3.Capillary tube of matched length as expansion device. 4.Evaporator coil with an electric heater inside and adequate glass wool insulation on all side. 5.Measurement a)Energymeter Tore compressor input power measurement. b)Pressure gauge for condensing and evaporating pressure. c)Flow meter for liquid refrigerant flow d)Digital Temperature indicator for measurement of temperature 6.safety & Controls a)High & low pressure cutout. b)Thermostat. c)Necessary Switches. A technical manual accompanies the unit. Also, the unit is provided with an attractive and rust proof powder coating.SERVICES REQUIRED:
1.Floor space of 2m x 1m. 2.230V AC stabilized supply with earthing connection
Decade Inductance Box – 3 Dial
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Digital Kymograph
Digital Kymograph has gained immense recognition in exporting and supplying quality assured array of Digital Kymograph Consists of a revolving drum that is wrapped with a sheet of paper and this kymograph is used to measure atmospheric pressure, the functioning of steam engines and tuning fork vibrations. Offered kymograph is made in complete compliance with predefined industry norms at our well-equipped unit. Furthermore, this Digital Kymograph is extensively appreciated and demanded in the market due to its rugged design and excellent performance.
Features
Excellent performance. Power efficient. Easy operation. Result accuracy.Specification
Digital Speed Selection. Spirit Level: For adjusting level. Auto Stop after One Complete Cycle. 16 x 2 LCD Digital Display with Back Light simultaneous display of all functions on the display and selection through display. Highly Accurate Speed : E/C System Speeds available -0.12.,0.25,0,.50,0.75,1.00,1.25,mm/Sec With Accurance of +/-0.01%. Timer With Alarm Time Multiplier (o-10 min in multiple of 30 sec.) for indicating washing Cycle Drug Injection times etc. Very Low Power Consumption (12 volts 1 Amp.). Operated with Stepper Motor which is highly accurate and run by Microprocessor based program. Battery Back Up (Optional): Auto Conversion to Battery Mode in Case of Electricity Failure. Back up 1 to 4 hours. Special Chrome Plated and Powder Coated Body: Extremely Resistant to Corrosion and Leak Proof Design. Self Lubrication Gear. And More Feature Available.
BEAKER
PRODUCT DESCRIPTION:
Features:
* Lab-Wares Beakers
* moulded in Polypropylene
* have excellent clarity and very good chemical resistance.
* These autoclavable Beakers have prominently raised graduations on the outer surface.
* Pouring a solutions becomes very convenient because of its tapered spout.
Size:
100ml
250ml
500ml
1000ml
Study Of Flow Measurement Devices
Measurement of liquid flow is required at various places and for various purposes. Different types of flow measuring devices are used depending upon the system conditions, accuracy required, skill of operator and economy desired. The unit demonstrates some of the flow measurement devices.
SPECIFICATIONS:
[1] Intergratiry Type Turbine flow meter. [2] Glass Tube Rotameter. [3] Orificemeter differential manometer. [4] Venturimeter [5] Measuring Tank [6] Stop Watch (Digital) [7] 112 HP Monoblock Pump. [8] A differential manometer. [9] Sump tank of suitable capacity. A technical manual accompanies the unit.SERVICES REQUIRED:
[1] Flow surface 2 mtrs. X 1 mtr. X 1.5 mtrs. height. [2] 230 Volts, 5 Amp. Stabilized AC.Power SupplyXTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
BEEHIVE SHELVE
Microscope Glass Slides – Frosted
Scalpel Blades
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Cryo Rack
Our Cryo Rack is moulded in polycarbonate making it tough, durable & autoclavable.
This handy Cryo Rack can hold 50 vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist.
This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
Material : Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Cryo Rack | 2 |
Allihn Condensers (Bulb Condenser)
Projection Microscope
Specifications
Projection Microscope is a dual purpose instrument which is equipped with the halogen projection bulb that works efficiently on the power supply of 220AC. The device is fitted with the highly effective cooling fan inside the instrument. The device is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. The instrument is supplied complete with the vinyl cover in a packing of a cardboard box. It is easy to operate instrument that offers highly accurate test results. The instrument provides high-quality and clear images. The instrument is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. It is a dual purpose instrument which is equipped with the halogen projection bulb. The works efficiently on the power supply of 220AC. The device is assembled with the effective cooling fan inside the instrument.
Spherometer
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Pilot Static Tube Set Up
DESCRIPTION:-
A Pitot tube is used to measure the local velocity at a given point in the flow stress. A Pitot tube of standard design made of copper / SS is supplied and is fixed below Vernier scale. The Vernier scale is capable to measure the position of Pitot tube in transparent pipe section. The pipe has a flow control valve to regulate the flow. A U-tube manometer is provided to determine the velocity head. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.EXPERIMENTS:-
Ø To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot tube Ø To plot velocity profile across the cross section of pipeUTILITIES: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATION: –
Ø Pitot Tube : Material Copper/SS of compatible size fitted with Vernier Scale Ø Test Section : Material Clear Acrylic, Compatible to 1” Dia. Pipe Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank, Capacity 40 Ltrs. Ø Sump Tank : Capacity 70 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted Structure
Lathe Tool Dynamometers
This is a strain gauge type two component lathe tool dynamometer designed to measure vertical and horizontal forces on the while orthogonal cutting process. The unit is in two parts one is mechanical sensing unit or tool holder, which can mounted on the top of the Ross slide after removing swivel base and compound slide of a lathe and digital force indicator. With this Dynamometer student can study the change in these forces by varying Speed, Cut and Feed.
FEATURES:
1.Rigid in construction 2.Sensitive transuding and amplifying system for accuracy in force measurement. 3.Compact Digital force indicator. 4.Use of cutting fluid during operation is possible.SCOPE OF SUPPLY:
1.Mechanical sensing unit or Tool Holder with string gauges. With H.S.S. tool of ½ “ size. 2.Control panel housing digital force indicator to measure two forces simuletensiously, balancing potentiometers, connoting cable. 3.Necessary switches, fuses and polycarbonate front plate. Range o to 500 Kg. 4.Centre Height, P.C.D.of clamping bolt size, clamping Bolt size. Three component lathe tool dynometer is also available.
Water Cooling Tower Apparatus
The apparatus consists of a forced draught, counter flow type-cooling tower. A blower supplies cooling air. Air enters the tower at the bottom. Hot water is, obtained from a geyser. Hot water is sprayed over the mesh packing through the nozzles and it flows downwards. Evaporative cooling of water occurs due to the current of air and water gets cooled. This student can study the operation of cooling tower and calculate the energy balance.
SPECIFICATION:
Cooling tower, fabricated of M.S. Sheets, 200 X 200 mm. cross section, 1.2m. height with Perspex front. Wire mesh packing is provided in the tower. Geyser – 3 Kw Capacity to provided hot water. Centrifugal blower, 1 HP capacity to force air through the tower. Multichannel Digital Temperature indicator to measure temperature at various points. Rotameter to measure inlet water flow. Measuring tank to measure outlet water flow. Calibrated orifice and water manometer to measure airflow. Arrangement to measure dry and wet bulb temperatures of air at 5 intermediate stations. A technical manual accompanies the unit. The unit Is provided with anticorrosion an attractive color powder coating.SERVICES REQUIRED:
440V, 32A, AC supply with neutral and earthing connection. Floor space of about 2m. X 1.5m. Water flow of 10 Ht./min. at constant head
Dissecting Microscope
Specifications
Microscope with round base is designed for greater stability. Having joint revolving arm for moving the magnifying lens over the stage allowing the whole stage are to be scanned. Focussable by Rack and Pinion. Detachable rests on either side of the stage provided steadying support for hands during fine dissection. Illumination by plano concave mirror in fork mount. With dust cover duIy packed in styofoam case. (Wooden Box optional).| Drawtube | Monocular | |
| Eyepiece | 10X | |
| Objective | 4X |
Redundant Joint Apparatus
Apparatus consists of three suspension members (spring balances) of different stiffness, which are jointed at a point to form the redundant joint. The upper end of the suspension members being tied in a position to a vertical wooden board. Arrangement is provided to apply a vertical load at the joint and to measure its horizontal and vertical displacement on a paper and also elongations and forces in the suspension members by the help of dial gauges. Dial gauges with magnetic base are provided with the apparatus.
EXPERIMENT:
Comparison of experimental and theoretical results of forces in the members and the component displacement of the loaded joint D of a three bar suspension system for vertical loads.REQUIRED ACCESSORIES:
• Redundant Joint Apparatus • Dial Gauge : 1 No. • Magnetic Base : 1 No. • Hangers : 1 Nos. • Weight of 500gm : As Per requirement.
PLC Based Variable Frequency Drive Module
Specification
• PLC provided to control the variable frequency drive • PLC having Analog Input and Analog Output channels in range of (0-10)V DC • PLC having the digital I/Os in range of 24V DC • Communication cable (RS 232/Ethernet) will be provided communicate the PLC to PC • VF drive provided it operates at 230V AC supply • It provides the 3Φ AC output voltage • 3Φ AC Induction motor will provides. It operates at 415 AC, 3Φ, Frequency as 50Hz and rated 1500 rpm speed • PLC and VF drive mounted on the attractive printed panel trainer kit. • Variable pot meter, push button and connectors provided for experiment purpose
Separatory Funnel
We bring forth the finest range of Separatory Funnel.
Our Separatory Funnel are designed in such a way that they make filling of carboys, drums and barrels very convenient.
The handles of these funnels make their handling very easy.
We offer these Separatory Funnel at market leading prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Separatory Funnel 100 ml | 2 | |
| Separatory Funnel 250 ml | 2 | |
| Separatory Funnel 500 ml | 2 |
