XTEMOS ELEMENT
AJAX PRODUCTS TABS
Steering Geometry Wheel Alignment Trainer
Steering Geometry & Wheel Alignment Trainer
With the help of this trainer the students can learn about steering geometry and practically perform wheel alignment using various tools.
(A) Turn Tables
(B) Toe In Toe Out Gauge
(C) Magnatic Caster Camber Gauge
(D) Manual Steering System With Four Wheels
(E) Tool Kit
Complete Optical Bench Set
Description
The Complete Optical Bench Set is an economical alternative to conventional optical benches that provides accurate demonstrations of basic optics principles. The complete system includes: 1. Optical bench-double-sided meter stick. 2. One Object and Marker. 3. One Screen support. 4. One Candle holder. 5. One Pair of metal supports. 6. Two Lens supports 4 cm and 7.5 cm. 7. Five White board screens, each 10 x 12.5 cm with a millimeter scale along one side. 8. 12 paraffin candles.
Cyclone IV FPGA Controller
FEATURES:
• Based on Altera family Cyclone IV, Device : EP4CE30 • One 34 pin header used for IPM Interface. - 16 PWM output - 8 capture inputs. • One 26 pin header ADC. - 4 channel 1MSPS ADC. - Total 8 channel using 2 Nos of ADC. - 12 bit resolution. - Input range -10V to 10V / -5V to 5V. • One 5 pin phoenix connector DAC - 4 channel DAC, 12 bit resolution. - Output range -10V to 10V / -5V to 5V. • 8 output Light Emitting Diodes (LEDs). • 8 input slide Switches. • 4 user push button switches. • 2-user limit switch. • 20 x 4 Alphanumeric LCD display. • On Board Isolated JTAG Programmer Compatible with QuartusII software. • Isolated USB (USB to Serial) interface. • 3 Nos of 20 pin header each have 16 IOs.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Behaviour Of Column Struts Apparatus
Apparatus consist of four spring steel columns which are put along a vertical wooden board. These four columns have different end conditions as below:
1. Both ends pinned
2. Both ends fixed
3. One end pinned and other fixed
4. One end fixed and other end free
Apparatus to be supplied should be complete with a supporting stand and a set of weights.
Composite Walls Apparatus
Composite Walls Apparatus:
The apparatus consists of a pair of M.S. plates, Bakelite, brass/aluminum. These plates in series on either side of the heater form a composite wall. The whole unit is clamped in a frame, which can be viewed through the Perspex sheet. The thermocouple tapings enables us to find out the conductivity and resistance of the composite walls.
SPECIFICATIONS:
1.Heater- Mica healer of dia. 250 mm. 2.Plates- a) M.S. plates of thickness 25mm & dia. 250mm.-2 nos. b) Bakelite plates of thickness 10mm & dia. 250mm.-2 nos. c)Brass/Aluminum plates of thickness 15mm & dia. 250mm.-2nos 3.Dimmerstat – 2 A capacity. 4.Measurements — a) voltmeter and an Ammeter to measure input power. b) Multichannel digital temperature indicator to measure temperatures at- various points. A technical manual accompanies the unit.SERVICES REQUIRED:
230 V, A.C. stabilized supply along with earthing connection. Bench area Im x lm x 0.5m height
Torsion Of Rods Apparatus
INTRODUCTION:
A torsion test is quite instrumental in determining the value of modulus of rigidity of a metallic specimen. The value of modulus of rigidity can be found out thought observations made during the experiment by using the torsion equation.APPARATUS:
1. A torsion testing machine. 2. Twist meter for measuring angles of twist 3. A steel rule and Vernier Caliper or micrometer
Linear Expansion Apparatus, Micrometer Screw Form
Description
A 500 mm long metal rod is supported in a plated brass tube with three tubules for steam inlet, outlet and thermometer. The tube is mounted on a stand with an adjusting screw at one end and a micrometer screw reading to 0.01 mm on the other, with terminals for connecting a bell or galvanometer to indicate contact. With copper, brass and iron test rods but without thermometer.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Compound Microscope (Student Microscope)
Specification
Elegant body, practical design and coated lenses. Fixed square stage 120mm x 120 mm with optional mechanical stage or slide clips. Focusing by coarse & fine adjustment knobs. Illumination by plano concave mirror reflector or optional LED light. Eye Piece 10x & 15x Objective 4x, 10x , 40x/45x 100x oil immersion is optional. Available in Styrofoam pack for safe & easy transport. Wooden Box is optional.
Lens, Double Convex, Spherical
Description
Clear glass, ground edges
| Focal length | Power | Add To Enquiry |
|---|---|---|
| 25 mm | 100 mm | +10D |
| 25 mm | 150 mm | +6.6D |
| 38 mm | 50 mm | +20D |
| 38 mm | 100 mm | +10D |
| 38 mm | 150 mm | +6.6D |
| 38 mm | 200 mm | +5D |
| 38 mm | 250 mm | +4D |
| 38 mm | 300 mm | +3.3D |
| 38 mm | 500 mm | +2D |
| 38 mm | 1000 mm | +1D |
| 50 mm | 50 mm | +20D |
| 50 mm | 100 mm | +10D |
| 50 mm | 150 mm | +6.6D |
| 50 mm | 200 mm | +5D |
| 50 mm | 250 mm | +4D |
| 50 mm | 300 mm | +3.3D |
| 50 mm | 500 mm | +2D |
| 50 mm | 1000 mm | +1D |
| 60 mm | 100 mm | +10D |
| 60 mm | 200 mm | +5D |
| 60 mm | 300 mm | +3.3D |
Microscope Slide Set Biology
Set of 25, this set covers the major requirements for a basic course in biology.
Selected slides from the zoology, histology and botany sections make up this useful set.
Supplied in Box.
Paramecium, E
Paramecium, conjugation, E
Hydra, TS
Hydra, with testis, TS
Hydra, with ovary, TS
Taenia (tapeworm), scolex, LS
Taenia, proglottid, E
Compact bone, TS
Striated muscle, LS
Cardiac muscle, LS
Spinal cord, TS
Nerve cells, smear
Skin, VS
Kidney, VS
Lycopodium strobilus, LS Spirogyra, conjugation, E Yeast, E
Lilium (lily), anther, TS Dryopteris, pinnule with sori, TS
Stigma with pollen tube Lilium (lily), anther, TS Dryopteris, pinnule with sori, TS
Stigma with pollen tube Cucurbita (marrow), stem, TS Lillium, ovary, TS
Tilia (lima), young and old stem, TS
Lumbricus (earthworm), TS , Typhlosole
Helianthus, stem, secondary thickening, TS
Mirror, with Base
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Electrical Power Steering System Actual Working
Electrical Power Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Blood Collection Vials (VACUTAINER) Plain/EDTA
Blood collection and storage is done is special tubes which allow the preservation of the blood sample over long periods.
These tubes can be made of glass or plastic and the caps of these vials are coloured to indicate the additives in them.
Some of the additives are anticoagulants such as EDTA, sodium citrate or heparin.
Other substances include preservatives. The containers containing coagulants are capped with gold, red or orange caps.
The ones containing anti-coagulants are green, which contain heparin, purple or lavender indicates ones which contain EDTA, grey capped tubes contain sodium fluoride or oxalate. Blood collection tubes (also called as vacutainers) are extensively used in hospitals, medical centres and diagnostic centres.
In biological labs, it is used in experiments like haemolysis etc.
Non Vacuum Vials (Pk of 100)
Vacuum Vials (Pk of 100)
Vacuum Assisted Hydraulic Drum Brake
Vacuum Assisted Hydraulic Drum Brake With Vacuum Booster & Motorised Vacuum Pump
Suitably sectionised full size unit. Consisting of original parts such as :- vacuum booster with master cylinder assembly, wheel cylinder, brake shoes, brake drums, motorised vacuum pump and necessary connections. Completed with operating lever and mounted on heavy iron stand.
Vernier Calipers Double Scale
Corcyra Egg Laying Cage
Description
Frame made of MDF sheet planks. Fine wire mesh provided on top and bottom fitted with 3mm dia hole wire mesh on one top, a rounded opening 3cm dia is provided which can be closed with wooden plug. On one side a rounded opening 11cm with an arrangement for drop clouser with the help of MDF sheet cover is provided for manually putting in/taking out the material. Size 35x25x18cmXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Brunton Compass
Description
We offer Brunton Compass (Geological Compass) which is available in a leather or wooden case. This compass differs from modern compasses, as it utilizes magnetic induction damping rather than fluid to dampen needle oscillation. It is widely used by geologists and surveyors to make accurate degree and angle.
Measuring Cylinder (Hexagonal Base)
We bring forth high quality Measuring Cylinder (Hexagonal Base) for our esteemed clients.
The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.
These Measuring Cylinder (Hexagonal Base) are high on demand for their quality.
We source them from reliable manufacturers.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Cylinder 10 ml (Hexagonal) | 24 | |
| Measuring Cylinder 25 ml (Hexagonal) | 12 | |
| Measuring Cylinder 50 ml (Hexagonal) | 12 | |
| Measuring Cylinder 100 ml (Hexagonal) | 12 | |
| Measuring Cylinder 250 ml (Hexagonal) | 6 | |
| Measuring Cylinder 500 ml (Hexagonal) | 4 | |
| Measuring Cylinder 1000 ml (Hexagonal) | 3 |
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.
Three Hinged Arch Apparatus
The mild steel model has a span of 100cm and rise 25cm, with hinges at supports and crown. One of the ends should rests on rollers. Along the horizontal span of the arch various points are marked at equidistant for the application of load. This being a statically determinate structure, the horizontal thrust developed under the action of any load system can be theoretically calculated and will also be measured directly by neutralizing the outward movement of the roller end. A dial gauge with 25mm travel (with magnetic base) may be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights.
