XTEMOS ELEMENT
AJAX PRODUCTS TABS
Pulse Width Modulation and Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Pulse Width Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Built in IC based DC Regulated Power supply ±12 V, +5 V.
2. Four level Built in carrier pulse Output.
3. Frequency Range: 8 KHz, 16 KHz, 32 KHz, 64 KHz Amplitude : 5 Vpp approx.
4. Built in sine wave Audio Frequency Function Generator for modulating signal. Frequency Range: 1 KHz and 2 KHz selectable with a toggle switch Amplitude : 0-10 Vpp and 0-4 Vpp approx.
5. Circuit Diagram for Modulation and Demodulation is printed on the milky white top panel.
Sterility Test Apparatus (S.S Manifold)
It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock.
A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump.
(Supplied without wolf bottle and vacuum/pressure pump).
These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media.
Filtration area is 12.5 cm and has a holding capacity of 250ml.
Though the only vacuum is required for filtration, some pressure is required for flushing liquids.
SPECIFICATIONS
| Material: | Stainless Steel | |
| Branch Test: | 3 Dia. 47mm | |
| Filtration Area: | 12.5 cm | |
| Holding Capacity: | 250 ml |
FEATURES
Robust design. Easy to use. Rustproof.APPLICATION
For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test
Episiotomy Training Simulator
Description
Suturing Simulators provide a realistic way for students to learn good surgical techniques. The simulators provide students with a variety of repair experiences without the constraint of time and concern for safety, which are factors with a live patient. The simulators can be used by the student in a learning lab with an instructor or by the student individually in the clinical setting just prior to a patient experience. They are also useful as homework teaching aids that can be signed out at night and returned the next day. In addition to being portable, the lifelike texture allows the learner to develop a “feel” for instrument handling, tension on suture, and the advantages of one method of tying knots over another.Includes one of each simulator:
Midline Suture Simulator Left Mediolateral Suture Simulator Right Mediolateral Suture Simulator Each simulator comes with an instruction booklet and is individually boxed.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
N-P-N Transistor Unit
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
CNC Lathe Trainer Slant Bed
CONTROLLER:
Type of control system : PLC based system Axis motor and drive : Servo motor & drive with feedback Input ti servo : Optically lsolated Motor Drive : TTL compatible Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Cycles : Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : providedMACHINE DETAILS:
Center Height : 100mm Swing over Carriage : 80mm Distance between Centre : 825mm Weight : 700kg Dimension in mm : 1250 x 900 x 1500 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron (Dia.) Automatic Lubrication : provided Tool Changer : Automatic – 8 stationSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 2HP Inside Taper : MT3 Speed Range : 100 to 3000 RPMAXIS TRAVEL:
X Axos : 100mm Z Axis : 300mm
Air Conditioning Trainer General Cycle Type
The unit consists of ducting fitted with various air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is provided. Cooling circuit consists of a hermetic compressor; air cooled condenser, thermostatic expansion valve and evaporator (i.e. cooling coil). Measurements of various parameters Torn cooling cycle and heating cycle are provided and students can easily visualize and understand the basic principles of air conditioning.
SPECIFICATIONS:
1.Cooling circuits – It consists of: a) Hermetic compressor, having the capacity of 2/3 ton of refrigeration (approx.) using R-22 refrigerant. b) Rotameter for liquid refrigerant flow measurement. c) Pressure gauges for high and low pressure. d) Prescott (i.e. high and low pressure cut-out). e) Thermometers for temperature measurement at various points In the cycle. f) Energymeter for compressor input measurement. g) Condensate measuring arrangement. 2.Heating Circuit – Air heaters with input control provided with energymeter for input measurement. Maximum heating capacity 1 Kw. 3.Steam generator and injector for humidification of air. All above components are connected to a duct of size 200mm. X 200mm. in which airflow is generated by axial flow fan. 4.Anemometer for measurement of air velocity, (range 0-15 m/sec. Following experiments can be conducted on the unit a) Cooling of atmospheric air. b) Heating of atmospheric air. c) Humidification of atmospheric air. d) Dehumidification and heating of atmospheric air. (Cooling coil acts as dehumidifier at reduced airflow.)SERVICES REQUIRED:
1.440 V, 15 A, 3 Phase supply with earthing connection. 2.Floor space area about 3 m. X 2 m.
Pentax Tribrach Adaptor
Description
Traverse Tribrach Adapter with Optical Plummet • 2.5X optical plummet • 60-second plate vial, adjustable • Precision-machined axis rotates 360º • Compatible with all prisms with a 24.9 mm bayonet base • Adjustable height : 100 mm-to-120 mm • Fits all standard three-prong tribrachs • The over point accuracy is 0.5 mm at 1.5 m
Pregnancy Pelvis With Baby
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Large Rectangular Transparent Tank
Pulleys Bench Clamp Fitting
Block, Glass
Autoclaves / Pressure Steam Sterilizers Superior
Specification
Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.Features
Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.Pressure Gauge
Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.| Capacity (Lt.) | Power | Size | Type |
|---|---|---|---|
| 21 Ltr | Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 21 Ltr | Non Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 27 Ltr | Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 27 Ltr | Non Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 37 Ltr | Electric | 350 x 380mm = 14"x15" | Mirror Finish |
| 37 Ltr | Non Electric | 350 x 380mm = 14"x15" | Mirror Finish |
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Rheostat, Protected With Single tube
Single Phase Bridge Firing Circuit
Specification
• Line synchronized IC based linear firing circuit for SCR applications. • Line synchronization achieved by 230 / 9V step down transformer. • Four nos. firing pulses to trigger four SCRs. • 1:1:1 Pulse transformer used for gate pulse isolation. • One no. potentiometer used to vary the firing angle (180° - 0°). • All four pulses terminated on the front panel for external SCR device module interface. • Carrier logic circuit implemented for SCR self start, carrier frequency 4KHz. • Debounce logic circuit implemented for SCR gate pulse ON/OFF. • One no. toggle switch for gate pulse ON/OFF. • 230V, 5Hz AC input, fuse provided for over load protection. • One no. ON/OFF switch with LED indication for power ON/OFF. • Provision to control the firing angle through external 0 to 5V DC.
PC Cryo Box
Our PC Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable.
These Polylab Cryo Boxes can accommodate Cryo Vials of up to 4.5 ml.
Capacity and are designed to be used at temperatures ranging from -190 C to + 121'C.
The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Cryo Box (P.C) - 50 places for 1 ml or 1.8 ml cryo vails | 8 | |
| Cryo Box (P.C) - 81 places for 1 ml or 1.8 ml cryo vails | 4 | |
| Cryo Box (P.C) - 81 places for 4.5 ml cryo vails | 4 | |
| Cryo Box (P.C) - 100 places for 1 ml or 1.8 ml cryo vails | 4 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Car Chassis Front Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Abney Level
Description
The Hand Level is a small, economical level for use with preliminary surveys to determine traveller way or cable way steel work elevations and other feasibility type site reconnaissance work. The Abney Level is very similar to a clinometer in that it is used to measure the value of a slope by means of arc measure and grade percentage.Specification of Abney Level
• Used to determine slope angle, tree heights etc • Graduated 0-+/-90 degrees, 0-+/-100% on a stationary arc • Vernier reads to 10 • Scale pointer incorporates friction thumb lock • Includes carry case
IoT Based Real Time Applications
Specification:
• To check the imbalance and deflection of moving machinery used for measuring various mechanical vibration • By using high performance acceleration meter realize the repetitiveness and accurate measurement. • Velocity : 0.01 – 400.0mm/s RMS 0.001-16.00inch/s • Acceleration : 0.1 – 400m/s2 equivalent peak • : 0.3 – 1312ft/s • Displacement : 0.001 – 4.000mm.
Laboratory Burette
We offer impressive range of Laboratory Burette for our users.
This Laboratory Burette has a transparent acrylic body and a leak proof stopcock fitted with a self lubricating PTFE plug.
Each Burette is individually calibrated to give maximum accuracy.
Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5 % wt/wt of acids or 30% bases.
Material : Polymethyl Methacrylate / TPX
| Particulars | Pack (Pcs) | |
|---|---|---|
| Burette 25 ml | 10 | |
| Burette 50 ml | 10 | |
| Burette 100 ml | 10 |
