XTEMOS ELEMENT
AJAX PRODUCTS TABS
Serological Water Bath
Specifications
Material of Construction Inner chamber and lid Stainless Steel ,Outer chamber Mild Steel duly powder coated. Insulation Special grade mineral wool Heating- Immersion heaters Control panel - On/off switch - Heating and mains indicators - Thermostatic temperature controller Power- 220 V / 50 HzAccessories
Stainless steel top lid- Tray Optional Stirrer with 1/20 hp Motor with S.S. rod and blade - Digital Temperature Indicating Controller - Microprocessor based PID Digital temp. Indicator-Cum-Controller| Capacity | Load | Temperature |
|---|---|---|
| 14 Liters | 1.0 KW | Range:5°C above ambient to 100°C |
| 18 Liters | 1.5 KW | Sensitivity: ±0.5°C or better |
| 25 Liters | 2.0 KW | Sensor PT:-100 |
| 32 Liters | 3.0 KW | Accuracy: +/-5°C |
Bicycle Dynamo Assembly
Balance Weights
Polished brass, supplied with wooden block, as illustrated.
• Capacity 500 gm. Comprising 1x200 gm, 2x100gm, 1x50gm, 1x20gm, 2x10gm, 1x5 gm, 2x2 gm, 1x1 gm
• Capacity 1000 gm. Comprising 1x500 gm, 1x200 gm, 2x100 gm, 1x50 gm, 1x20 gm, 2x10 gm, 1x5 gm, 2x2 gm, 1x1 gm.
• Capacity 2000 gm. Comprising 1x1000 gm, 1x500gm, 1x200gm, 2x100gm, 1x50gm, 1x20gm, 2x10gm, 1x5gm, 2x2gm, 2x2gm, 1x1gm.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Diffraction Object Holder
Linear Expansion Apparatus
Consisting of a metal rod, 500mm in length and 4.5mm diameter, enclosed in a well lagged, nickle plated brass tube with three tubules for steam, inlet, outlet and thermometer.
The metal rod to be studied is supported in the steam jacket by detachable conical cups situated at each end of the tube.
The apparatus is carried on a heavy gauge channel base at one end of which is an adjusting screw.
At the opposite end is a micrometer screw reading to 0.01mm for measuring the expansion.
Supplied complete with copper, brass & iron rods but without thermometer.
U Shaped Magnet
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
CNC Mill Trainer1
CONTROLLER:
Type of Controller System : PLC based system under collaboration from tudor,uk Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive TTL Compatible Input to Stepper :Optically lsolated , motor drive TTL Compatible Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std Codes Real time tool path :with online 3D simulationTABLE:
Length x Width : 600 x 225 (approx.) Clamping Area : 450 x 160 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron(Standard) Distance from sindle :25-225mm(Nose to table top) Centerline to column :170mm Rapid Travel 700 mm/min Weight in kg : 950kg Dimension in mm : 1200 x 1200 x 1900 mmSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM
Tablet Making Machine (Hand Operated)
Details
Single punch automatic compression and injection device with each revolution of the wheel drive automatic feed and remove of tablets. Built on heavy cast body with centric pressure system SS hoper provided and connected by a rubber tube easy setting for thickness and hardness of tablets with nuts and locknuts.Features
Easily rotating wheel for making tablets. Compressing lever for adjustable harness of tablets. Adjustable lower punch for adjusting the thickness. Stainless steel day and punch size 6, 9, 12 mm. Electrical model can be provided in same with ½h.p motor.
Water Bath Tissue Flotation
Specifications
Double walled round construction. Inner chamber stainless steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80°C. Complete with indicators, wire & plug. To work on 220V AC.Chamber Size In mms (dia x depth)
200x75 250x125XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Autoclave, Radial Locking
Specification
Double wall chamber Autoclave. The inner chamber and outer wall made of stainless steel, ring made of stainless steel/ mild steel. The lid is made of stainless steel tightened by radial arms through a steering wheel made of chrome plated mild steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, inner container, S.S bucket and mild steel legs for Autoclave. The Autoclave can hold the in between 5psi to 20 psi. Autoclave, Vertical, Double Walled, Radial Locking.| Capacity (Lt.) | Size | |
|---|---|---|
| 23 litres | (10” x 18”) | |
| 40 litres | (12” x 22”) | |
| 52 litres | (14” x 22”) | |
| 60 litres | (14” x 25”) | |
| 75 litres | (16” x 24”) | |
| 95 litres | (18” x 24”) | |
| 180 litres | (22” x 30”) |
Constant Pressure Air Thermometer
Description
Jolly's thermometer bulb connected via a 3-way stopcock to mercury tube. Sliding indicator on right hand limb with reservoir sliding on vertical clamping rod. Metal vessel to surround the bulb. Mounted on wooden stand, height 740 mm. All glass parts except reservoir are made of borosilicate glass.
Transducer Trainer
Specification
• RTD acts as a temperature sensor • Strain gauge based load cell • Linear variable resistive transducer • LDR, Photo diode, photo transistor • Precision servo potentiometer • Inductive type proximity sensor • Heat source, Filament lamp, Buzzer • 3½ digit LED display • Analog type 10V Center-Zero meter • Inverting and Non-inverting amplifier • Amplifier with Gain and offset control • Instrumentation and summing amplifier • Low pass filter • Precision Rectifier • Timer and buzzer oscillator • Electric switchXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.
Ball & Ring seperate
Thermopile
Melting Point Apparatus
Description
Mechanical Type (Routin) Phase : Single Phase Power : 50Hz Melting Temperature : upto 230˚C Voltage : 220V Features: The mounting block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and mercury thermometer. The temp is regulated by energy regulator fitted to the unit. Supplied without capillary tubes and thermometerXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Cyclone IV FPGA Controller
FEATURES:
• Based on Altera family Cyclone IV, Device : EP4CE30 • One 34 pin header used for IPM Interface. - 16 PWM output - 8 capture inputs. • One 26 pin header ADC. - 4 channel 1MSPS ADC. - Total 8 channel using 2 Nos of ADC. - 12 bit resolution. - Input range -10V to 10V / -5V to 5V. • One 5 pin phoenix connector DAC - 4 channel DAC, 12 bit resolution. - Output range -10V to 10V / -5V to 5V. • 8 output Light Emitting Diodes (LEDs). • 8 input slide Switches. • 4 user push button switches. • 2-user limit switch. • 20 x 4 Alphanumeric LCD display. • On Board Isolated JTAG Programmer Compatible with QuartusII software. • Isolated USB (USB to Serial) interface. • 3 Nos of 20 pin header each have 16 IOs.
Thermocouple Calibration Test Rig
The Unit helps in calibrating given thermocouple for the range 0°C to 100°C. While calibrating, thermocouple is once dipped in ice for 0Q C and then in boiling water for 100°C. This is done till the thermocouple shows the actual temperature of ice (0° C) and boiling wafer (100°C) and a linear calibration is set. A mV meter is provided to know the corresponding voltage.
SPECIFICATIONS:
1.A digital mV Meter and a digital temperature indicator with 2 different type of thermocouples. 2.A water container with heater of 1 KW. 3.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Table surface area – 2 m X 1 m X 0.5 m height. 2.220V, 50hz. Stabilize Electric Power Supply. 3.Ice cubes – 0.5Kg. Approx.
