XTEMOS ELEMENT
AJAX PRODUCTS TABS
PH METER
Product Description
Due to our wide expertise, we are involved in manufacturing and exporting Digital pH Meter. The leading technology we have incorporated in this equipment results in accurate measurement of pH balance. Widely demanded in pharmaceutical, chemical, and food and beverage industry, this digital pH meter is available at a competitive price for our prestigious clients. Features:- Sleek design
- Accurate results
- Digital display
- Digital PH METER
- Max Make
- E.I. Make
- PH Electrode (Glass) Routine
- PH Electrode (Gell Filled) Unbreakable
- Pen type PH METER
Plaque Building Anatomical Models
Human Head And Neck L. S.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Roots, Stems, Leaves
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multicolours with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. T.S Dicot root T.S Monocot root T.S Dicot stem T.S Monocot stem T.S Dicot leaf T.S Monocot leaf Root modification Stem modification (Arial) Leaf modification T.S dicot stem secondary growth Vegetative propagation Artificial propagation Specialized stems Typical leaf showing parts Types of leaves Simple leaves Stipules Leaf venation Compound leaves Phyllotaxy T.S. Dicot root Leaf Lamina secondary growth
8085 Microprocessor LC LCD Trainer
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery Back up for RAM • PC Keyboard (104Keys) • 16x2 Alphanumeric Dot Matrix Liquid crystal display with back light • 3 Channel 16 Bit counter / timer terminated in a 10 pin connector using 8253 • 24/22 TTL I/O lines, terminated at 1 No of 26-Pin FRC connector by using 1 No of 8255/1No 8155 respectively • 8 Nos of Digital inputs terminated and given through on board 8 way Dip switch • 8 Nos of Digital outputs are terminated and displayed in the 8 Nos of SMD type LEDs • Digital I/O lines are terminated in 20-Pin connector • RS 232C compatible Serial port terminated in a 9-pin 'D' male connector • One VXT-Bus (50-Pin FRC Connector) for interfacing VBMB series of experiment boards for bus expansion. • Interrupts are terminated in a 5-Pin connector • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging.
Sieve Shaker Electrical Table Model (Only For 8” Dia Sieve)
Sieve shakers are used to measure particle size as part of your research or quality control applications.
Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.
Projection Microscope
Specifications
Projection Microscope is a dual purpose instrument which is equipped with the halogen projection bulb that works efficiently on the power supply of 220AC. The device is fitted with the highly effective cooling fan inside the instrument. The device is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. The instrument is supplied complete with the vinyl cover in a packing of a cardboard box. It is easy to operate instrument that offers highly accurate test results. The instrument provides high-quality and clear images. The instrument is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. It is a dual purpose instrument which is equipped with the halogen projection bulb. The works efficiently on the power supply of 220AC. The device is assembled with the effective cooling fan inside the instrument.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Analog PID Controller
The analog PID controller is a special purpose analog controller with operational amplifiers The controller permits a detailed analysis of the application of proportional, integral and derivative control to the improvement of their performance. The controller may be used at high speed for oscilloscope observation or at a low speed for meter observation.
FEATURES:
• Two analog meters (centre zero meters) to display the set variable and process variable. • In built regulated power supply. • Provision to vary and measure the setpoint (0-5)V • Provision to vary the proportional gain, Integral time and derivative gain. • Provision to give either (4-20)mA or (0-5)V externally as a process variable. • Provision to select the controller output as (4-20)mA or (0-5)V internally. • All the components are mounted in an attractive cabinet. • Interface with any realtime process (Level, Flow, Temperature, Pressure, DC motor speed control etc.,)
Human Ear, Enlarged, 2 Parts
Pulley Bench Clamp Fitting
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Perimeter Smith Type
Specifications
Material : Stainless Steel Color : BlackProduct Description
The perimeter is an instrument for accurate charting of the field of vision. It consists of. A vertical stand on which a metallic arc is pivoted. It also bear a circular black disc to read the meridian in which the arc in shape of a semicircle with radius 330 mm. Its rotating in any direction and fix at any position with a tightening screw. The arc is graduated from 0 to 90 with a movable test object which is a white color spot of size 10mm diameter painted on a circular disc it can be moved with arc. An adjustable chin rest and a detachable leveling bar is fixed in front of the metallic arc. A scale and circular chart frame to hold the chart paper in position is provided at the back of the circular disc. A metallic graduated scale with a movable pin-punch pointer is fixed to mark on the perimeter chart paper.
4 Stroke 1 Cylinder Petrol Engine Manual Driven
The engine will be sectioned to show the internal constructional details. The working of individual part and accessories like Valves, Pistons, pumps, Crank and Camshaft, etc. will be demonstrated. It is provided with Flywheel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes. The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Flow Over Weir Or Open Channel Apparatus
Flow Over Weir Or Open Channel Apparatus:
A ‘WEIR’ is the name given to concrete or masonry structure built across a river (or stream) in order to raise the level of water on the upstream side and to allow the excess water to flow over its entire length to the downstream side. Weirs may also be used for measuring the rate of flow of water in river or streams.
Different shapes of “WEIRS” generally used are sharp-crested weir, broadcasted weir and ogee shaped weir.
In the unit a centrifugal pump sucks the water from the sump tank, and discharges it to a small flow channel. The weir is fitted at the end of channel. All the weirs are interchangeable. The water-flowing over the weir falls in the collector. Water coming at from the collector can be directed to the sump or can be directed in to the measuring tank for measurement of flow.
SPECIFICATIONS:
[1] The unit is provided with following weirs: (a) Sharp-crested weir. (b) Broad-crested weir. (c) Ogee shaped weir. [2] Pump 1/2 H.P. monoblock. [3] Flow measurement – Measuring tank calibrated water flow meter is used. A technical manual accompanies the unit.SERVICES REQUIRED:
[1] Floor surface – 2.5 m x 1.5 m. [2] 230 v, 5 amp supply with earthing connection
Motor With Solar Cell
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Pulse Code Modulation/Demodulation
FEATURES:
• In-built sine wave generator • Test points to study different waveforms • In-built DC Power supplyTechnical Specifications:
• Sine wave Generator : Frequency : 1 KHz, Amplitude : 0 to 3Vpp • DC Voltage : -1.5 V to +1.5V • Clock Generator : Crystal based, 4.096MHz • Data rate : 64 kbps (for 8 KHz sampling rate)128kbps (for 16 KHz sampling rate) • ADC and DAC bits : 8 • Demodulator filter type : Butterworth low pass filter • Filter type : 6th • Filter cut-off frequency : 3.4 KHz • Mic Pre-amplifier : Transistor based • Compandingrange : -80dBm to +20dbm • Switched faults : 4 • Test points : 35 • Fuse : 30V, 100mV • DC Supply : ±5V, ±12V • System Bandwidth : 3.4 KHz
Tablet Coating Pan
Product Description
We offer coating pan that is designed to perfection and fabricated from best grades of raw material procured from reliable sources. These coating pan are suitable for coating tablets and is checked by our quality controllers for high performance and uniform coating all over the tablet. The different parts of our coating pan machines are listed as under:PAN
The coating pan is SS semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets, Pan mounted at an inclination of 45 degrees to the horizontal.DRIVE ASSEMBLYPAN
The tablet coating pan consists of a suitable HP 3 Phase, 440 V, 1440 RPM TEFC motor with suitable worm reduction gear box and cone pulley arrangement to give three speed output.HOT AIR BLOWERPAN
The tablet coating pan unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880 RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.
Tuning Forks, Set of 4
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Wide Mouth Reagent Bottle
Our Wide Mouth Reagent Bottle is available in Polypropylene.
The PP Wide Mouth Reagent Bottle, offered by us, are largely demanded for their unique features.
These features include Rigid, Translucent and have Excellent Contact Clarity.
Moreover, our Wide Mouth Reagent Bottle is available at affordable prices.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Reagent Bottle (Wide Mouth) 30 ml | 12 | |
| Reagent Bottle (Wide Mouth) 60 ml | 12 | |
| Reagent Bottle (Wide Mouth) 125 ml | 12 | |
| Reagent Bottle (Wide Mouth) 250 ml | 12 | |
| Reagent Bottle (Wide Mouth) 500 ml | 12 | |
| Reagent Bottle (Wide Mouth) 1000 ml | 6 | |
| Narrow Mouth Bottle 4000 ml | 1 | |
| Wide Mouth Square Bottle 4000 ml | 1 | |
| Heavy Duty Vaccum Bottle 2000 ml | 1 |
Discharge Over Notches Apparatus
DESCRIPTION:-
The Lab setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel .A hook gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three brass notches, i.e. rectangular notch. 60 V notch & 45 V notch provided along with the set up. Present set – up is self –contained water re- circulating unit .provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass value are fitted in water line to conduct the experiment on different flow rate .Flow rate of water is measured with the help of measuring tank and stopwatch.EXPERIMENTS:-
Ø To Determination Co-efficient of discharge (Cd) through Ø V notch (45 deg. and 60 deg.) Ø Rectangular Notch. Ø Trapezoidal NotchUTILITIES REQUIRED: –
Ø Water Supply & Drain Ø Electricity 0.5kw,220V AC, Single PhaseTECHNICAL SPECIFICATION: –
Ø Channel Test Section : Size 600x250x180 mm Ø Notches : Material Brass(3 Nos) 1. Rectangular Notch 2. 45 deg. V Notch 3. 60 deg. V Notch 4. Trapezoidal Notch Ø Hook / Pointer : With Vernier Scale Ø Water Circulation : FHP Pump, Crompton/Sharp make. Ø Flow Measurement : Using Measuring Tank with Piezometer, Cap.25 Ltrs. Ø Sump Tank : Capacity 70 Liters. Ø Stop Watch : Electronic Ø Control Panel : On/Off Switches, Main Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted Structure.
Urine Container
We offer best quality Urine Container s which can be used for collecting a wide range of samples of sputum, urine etc.
Moulded in polypropylene these containers are excellently leak proof.
These Urine Containers are manufactured from best quality raw material and are durable in nature.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Urine Container 30 ml | 100 | |
| Urine Container 60 ml | 100 |
Gear Box Actual Cut Section
Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Plain Laboratory Desiccator
We offer premium range of Plain Laboratory Desiccator which can be availed at market leading price range. Plain Desiccator have excellent quality and durability.
Grease should be applied on the flanges to make it air tight.
Material : Polypropylene/ Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Desiccator (Plain) PP/PC 150 mm | 1 | |
| Desiccator (Plain) PP/PC 200 mm | 1 | |
| Desiccator (Plain) PP/PC 250 mm | 1 | |
| Desiccator (Plain) PP/PC 300 mm | 1 |
Masses, Slotted
Solid brass, Accurate machined masses placed on a plastic and metal rack with handle.
Set of 8: 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, and 1x500 gm, Total 1100 gm.
Set of 10: 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1100 gm.
Set of 12: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, 1x500 gm, Total 1110 gm.
Set of 14: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1110 gm.
