XTEMOS ELEMENT
AJAX PRODUCTS TABS
Tray Dryer
| Design | Standard, Customized | |
| Capacity | 96 trays | |
| Automatic Grade | Automatic, Semi-Automatic | |
| Max Temperature | 250 degree C |
| Chamber Size (HxWxD) | Tray Capacity mm Inches | |
|---|---|---|
| 430x840x650 8Tray | 16”x32”x 1 1/4 | |
| 430x840x910 12Tray | 16”x32”x 1 1/4 | |
| 910x840x910 24Tray | 16”x32”x 1 1/4 | |
| 960x1270x1450 45Tray | 16”x32”x 1 1/4 | |
| 960x1700x1700 96Tray | 16”x32”x 1 1/4 |
Optional
Timer 0-24 hours. Digital temp. Indicator-cum-controller. Tray 16”x32”x 1 1/4 size.
Shell Tube Heat Exchanger Water To Water
Heat exchanger is the devices used to transfer the heat from one fluid to other. The shell and tube heat exchanger is two tube single pass heat exchanger. The hot fluid is hot water obtained from water heater. The coil fluid is cold water. The schematic flow arrangement is shown in figure. Hot water enters the lower side of end box, flows through the tubes in lower half of shell and comes to the other end of the shell. It reverses its direction, flows through tubes in upper half of the shell and leaves out. Cold water enters lower part of the shell passes over the tubes between the baffles and leaves out the shell through outlet at upper surface of shell.
SPECIFICATIONS:
1.Shell – 150NB, 750 m.m. long provided with end boxes. a.One end box with divider plate. b.25% cut baffles – 4 Nos. in the shell. 2.Tubes – 4.5mm I.D., 6.35mm O.D.,250 m.m. length copper tubes with triangular pitch. 3.Instantaneous water heater, 3 Kw capacity, to supply hot water. 4.Thermometer for measuring the water temperature. 5.Valves to control hot and cold water flow.SERVICES REQUIRED:
1.3 P H, AC supply 2.Floor space 1.5m. X 1m, 3.230V, 15A, AC supply with earthing connection. 4.Water supply at the rate of about 10 lit/min at constant heat.
Amplitude Modulation And Demodulation
Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission. It is still used in radio system to transmit audio signal although it has lesser in popularity compared to FM (Frequency Modulation) due to its lower signal to noise ratio.
Technical Specification :-
1. I C based DC regulated Power Supply ±12 V / 500 mA.
2. Audio frequency 1 KHz / 0-2 Vpp for modulating signal 455 KHz / 2.5 Vpp approx. for Carrier Frequency.
Compact Light Source
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
IoT Based Real Time Applications
Specification:
• To check the imbalance and deflection of moving machinery used for measuring various mechanical vibration • By using high performance acceleration meter realize the repetitiveness and accurate measurement. • Velocity : 0.01 – 400.0mm/s RMS 0.001-16.00inch/s • Acceleration : 0.1 – 400m/s2 equivalent peak • : 0.3 – 1312ft/s • Displacement : 0.001 – 4.000mm.
Car Chassis Rear Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM:It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Linear Air Track
Angular section aluminium alloy track, length 255cms, with staggered air holes, supported on two light alloy castings positioned 45 cm from each end of the track.
One support has a two- point contact and other one-point contact for lateral and horizontal adjustments for which a knurled screw is provided.
Large catapult arms with slots for elastic bands are fitted to each end of the track.
A fully fitted to one end of the track enables experiments involving acceleration under a constant force.
Identical end caps enable air to be introduced from either end of the track, bung being supplied to close the end not being used.
The vehicle buffer attachments and clamping screws are matt black to help interpretation of stroboscopic photographs.
Pocket Compass
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Hall Effect Transducer
Voltage Measurement:
• One Voltage Signal conditioner is provided to interface with ADC • Output Voltage Range: (0-5V) • One Analog meter is provided to indicate the input voltage.Current Measurement:
• One Current Signal conditioner is provided to interface with ADC • Output Voltage Range: (0-5V) • One Analog meter is provided to indicate the input current. • Built-in Power Supply • One Auto Transformer is provided to vary the input voltage and current • 3½ Digit digital indicator
Digital Planimeter
Description
We have for our clients a wide range of digital planimeter that are known for their good quality and ability to display the accurate results. Technology advanced, these survey instruments comes with a clear display. The digital planimeter that we have are used for measuring distances on the maps or drawings.
Ray box Multi Slit
Sliding Mesh Gear Box
Sliding Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Window Air Conditioning Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Ray Optics Kit
Description
Consists of 2 lamps and two stands, 1 pair housing shields, 2 combined single and triple slit plates, 2 multiple slit combs, 2 holders for combs and slit plates, 4 wooden light barriers, and following cylindrical lenses, of size 50 x 50 mm. 4 No Lenses of +7D, 2 of +10D, 2 of +17D and 2 of -17D.
Heart Models
Our capability and industrial know how has enabled us to manufacture, supply and export Heart Models.
Made of superior quality raw materials that are supposed to be the best in the market, these products have a descriptive structure and construction.
With clear depiction of external features and internal structures of the heart, these provide an appropriate indication of various large blood vessels.
These products help in education medical students about the clearer conception of the routes of the systemic and pulmonary circulation in the heart.
Heart Models are packed in special packaging material so as to ensure its safe and secure transit.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Minerals Collection
Description
A quality collection of minerals, in wooden box, with partitioned tray containing 30 specimens, each numbered and enclosed in transparent plastics bag. Specimens may be removed from bags for detailed examination. Each speciman is labelled also on the inside of the box lid, indicating the geological name.
Pregnancy Pelvis With Baby
Prism
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Smart Energy Meter
A Smart Energy Meter based on Analog Devices IC has been developed to build an Advanced Metering Infrastructure (AMI). The AMI system facilitates networking capability via GSM, ZigBee and ModBus. A Smart Energy Meter Development system has been developed by us, which consists of 1φ/3φ measurement section, a 32-bit ARM controller, wireless modules and powerful software. The student can completely understand the concept and usage of this trainer. This can be also used as one of the IOT server node.
Features
• 3 Phase energy readings displayed in the Graphics LCD • Simple design, Efficient and Highly Accurate • Easy connectivity for various loads • Keys to change the settings • Supports GSM, ZigBee and ModBus for networking • LPC2148 based processing board • 32/16 bit ARM7TDMI-S CPU with 60MHz maximum CPU clock • On board peripherals for extension • Graphics LCD interfaced to display the energy readings • Keys for various settings • Current Sensors and Voltage Sensors provided to measure 3 phase voltages and currents • Polyphase energy metering IC provides highly accurate energy measurement • Energy metering IC interfaced via I2C with Controller module • CC2530 Controller with maximum 32MHz CPU clock • High-speed and low-power 8051 CPU • 2.5GHz IEEE 802.15.4 compliant RF transceiver upto 250kbps data rate • UART Connectivity to interface with CPU
Wide Mouth Reagent Bottle
Our Wide Mouth Reagent Bottle is available in Polypropylene.
The PP Wide Mouth Reagent Bottle, offered by us, are largely demanded for their unique features.
These features include Rigid, Translucent and have Excellent Contact Clarity.
Moreover, our Wide Mouth Reagent Bottle is available at affordable prices.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Reagent Bottle (Wide Mouth) 30 ml | 12 | |
| Reagent Bottle (Wide Mouth) 60 ml | 12 | |
| Reagent Bottle (Wide Mouth) 125 ml | 12 | |
| Reagent Bottle (Wide Mouth) 250 ml | 12 | |
| Reagent Bottle (Wide Mouth) 500 ml | 12 | |
| Reagent Bottle (Wide Mouth) 1000 ml | 6 | |
| Narrow Mouth Bottle 4000 ml | 1 | |
| Wide Mouth Square Bottle 4000 ml | 1 | |
| Heavy Duty Vaccum Bottle 2000 ml | 1 |
Insect Display & Storage Showcase
Description
For pinning of insects on bottom. White Hardwood / Teakwood with glass in wooden frame on top & MDF sheet bottom is nicely polished. Bottom lined with 8 mm thick soft pinning, washable EVA Sheet. Inside glazed white. Raised wooden wall with holes for insecticide inside bottom to make box air tight and pest proof. Fitted with brass hinges, index card holder & clips. Size 53x45x9cm Size 45x30x6.5cm Size 38x25x6.5cm Size 30x23x6.5cm
Laboratory Spatula
Acquire from us high quality Laboratory Spatula at affordable price range.
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
This is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Spatula 150 mm | 12 | |
| Spatula 200 mm | 12 |
