XTEMOS ELEMENT
AJAX PRODUCTS TABS
Tuning Forks welch type
Description :-
Consists of aluminum tuning forks, mallet in a wooden box.
Tuning forks are stamped with frequency and note.
Set of 8 (C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512)
Set of 13 (G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Set of 8 (C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512)
Set of 13 (G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Baby Weighing Balance
A single beam scale, robust steel body with epoxy powder coated parts.
The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each.
One hanger and one slotted mass is provided to increase the capacity of the balance.
When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg.
On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg.
The tray is detachable and can be easily replaced in position by sliding on to fixed plate.
Second scale is provided which reads 0 to 1 kg in division of 10 gms.
Making the total capacity of balance 16 kg in to 10 gms.
Transformer Stand and Core
Description
Apparatus is designed primarily for demonstration of the basic principles of transformers. It consists of a laminated U-core with laminated I-core, both with 32 x 25 mm cross section to form a closed core of size 102 x 127 mm. Heavy aluminium alloy stand with removable clamping rods, 2 pole pieces, each 65 x 30 x 25 mm with one end cone shaped, to accept support rod and shading ring. Poles also have a hole drilled through lengthwise to take a light beam. 300 turns 600 turns 1200 turns 3600 turns 12000 turns
Stop Cocks
We bring to you, polypropylene Stop Cocks.
The Stop Cocks offered by us are fitted with a PTFE plug & have serrated tubulations, that accept from 6 mm to 10 mm tubing.
The Stop Cocks are leakproof and are available in two different options i.e. 2 way & 3 way.
Material : Polypropylene/ PTFE
| Particulars | Pack (Pcs) | |
|---|---|---|
| Stop Cocks 2 Way | 6 | |
| Stop Cocks 3 Way | 6 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Tuning Forks
Tilt Telescopic Collapsible Steering System
Tilt, Telescopic & Collapsible Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Brush, Semi Micro
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Dynamic Trolley, Wooden
Digital Viscometer
Description
Digital Viscometer Ensuring proper fluid viscosity is key in process environments. Achieving this requires an accurate, reliable, and durable in-line viscometer capable of monitoring fluid viscosity with minimal operator involvement. The Cambridge Viscosity VISCOpro 1600 viscometer is an ideal digital viscometer for this application due to its high accuracy and reliability, as well as its inherent ruggedness. The VISCOpro1600 viscometer can be used alone or in a multi-channel configuration controlled by a touch-screen display. This digital viscometer provides continual viscosity monitoring you can rely on. It is a compact instrument for applications where minimal operator involvement is desired. This digital viscometer features an optional LCD display for monitoring of critical fluid conditions. It also can be connected to a programmable logic controller (PLC) for seamless integration into a proprietary data management system. The units sensor and electronics are encased in an explosion-proof housing for durability and reliability. Due to Cambridge Viscositys patented technology, only a very small amount of fluid (1 ml) is required to obtain an accurate reading. Due to the small sample size needed and its automatic operation, the VISCOpro 1600 helps to maximize the efficiency of your process line and minimize waste. In addition, it works with most Cambridge Viscosity in-tank or in-line 300 series or 500 series sensors, giving you the flexibility to choose from a range of high-quality, maintenance-free options.
Table Counter Suitable for 100 tablet
Bell Jar and Vacuum Pump Set
Description :- Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure.
The kit clearly demonstrates the method by which a pump works.
Also illustrates that air has mass and helps find its mass and density.
Explain the effect of surrounding air pressure on a sealed balloon.
The balloon will expand when the surrounding air is removed.
And also demonstrate that liquid boils at reduced temperature when the surrounding air pressure is reduced with instructions.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
Power Steering System
Power Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Brown Plant Hopper Insect Rearing Cage
Description
Framework of seasoned teakwood, nicely polished. Front door and top provided with non rattling glass and back & two sides with nylon wire screen supported by fine wire mesh. Wooden base covered with laminated sheet from inside. Size: 45x45x55 cm. Brown Plant Hopper Insect Rearing Cage Size: 60x60x80 cm.
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Adult CPR Training Full Body Manikin
Description
These manikins are fabricated using an optimum quality raw material to ensure they resemble the human body nicely. Having all the necessary indicators, these manikins are highly reliable and certainly the best way to polish skills.Features:
Indicates correct/incorrect artificial respiration. Right/wrong position display. Stimulates patient through heart pressure and artificial respiration.
Co-Ordinate Board
A very common task in math class is to plot and name points on what we call the co-ordinate board, more commonly known as a four-quadrant graph. We offer coordinate board game with color counters and dice to understand this difficult maths topic in the form of game. This article shows you the steps for plotting and nameing points on a co-ordinate board. Board measure: 38cm x 38cm. Set of 4 dice & 50 counters.
Prism
Reynold S Apparatus
DESCRIPTION:-
The Set-up is designed to verify Reynold’s Apparatus experimentally. The Apparatus consists of a glass tube which one end having bell mouth entrance connected to a water tank. At the other end of the glass tube a cock is provided to vary the rate of flow. Flow rate of water can be measured with the help of Measuring Cylinder and Stop Watch, supplied with the set-up. A capillary tube is introduced centrally in the bell mouth. To this tube dye is fed from a small container, placed at the top of Constant head Tank, through polythene tubing.EXPERIMENTS:-
Ø To study different types of flow. Ø To determine the Reynold’s Number and hence the type of floe either laminar or turbulent.UTILITIES REQUIRED: -
Ø Water Supply. Ø DrainTECHNICAL SPECIFICATION: - | ||
| Ø Tube | : | Material Borosilicate Glass |
| Ø Dye Vessel | : | Material SS, Suitable Capacity |
| Ø Capillary Tube | : | Material Copper/Stainless Steel |
| Ø Constant Head Water Tank | : | Capacity 40 Liters. |
| Ø Water Circulation | : | FHP Pump |
| Ø Flow Measurement | : | Using Measuring Cylinder |
| Ø Sump Tank | : | Capacity 60 Liters |
| Ø Stop Watch | : | Capacity 60 Liters. Electronic |
| Ø Control Panel Comprises of | : | Standard make, On/Off Switch, Mains Indicator, etc. |
| Ø The Whole set-up is well designed and arranged in a good quality painted structure. | ||
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
LPC 2148 Evaluation Board
ON Chip Features
• CPU - LPC2148. • Core - 16/32 Bit ARM7TDMI-S. • Speed - Max 60 MHZ. • Flash - 512KB. • RAM (on-chip) - 40KB. • 46 x General Purpose I/O Pins. • USB2.0 Full speed Compliant Device. • One 10bit ADC with 14 Analog inputs. • One 10bit D/A Converter. • Two 32bit Timers/ External Event Counters. • Low Power Real Time Clock. • Six PWM, Watchdog. • Two UARTS (16c550). • Two Fast I2C (400Kb/s) Module.ON Board Features
• Eight Digital Output - LED Interface. • Two Digital Input. • 16 x 2 Character LCD Interface. • 7 Segment Display via I2C Interface. • 10 Base T Ethernet Connectivity. • SD Card Interface Support. • Audio Interface. • Jtag connector is provided for Debugger. • USB to serial interface provided.
Accessories Set For Demountable Transformer
Description
Comprising 1 welding coil of 5 turns on former with insulated handle and short-circuiting pins,1 annular melting trough with insulated handle to show heating by induction,1 jumping ring which is thrown clear when primary current is started and a floating ring which remains freely suspended when primary current is flowing.
Outside Micrometers (Etching Marking)
Description
Micrometer is used to measure short lengths accurately Technical Details : ; Carbide Tipped Measuring Faces ; Blue Metallic Finish Frame ; With Locking Clamp and ratchet stop ; Printed Marking on the Vernier Scale ; Least Count : 0.01mm/0.001” Sizes Sizes 0-25 0-1” 25-50 1-2” 50-75 2-3” 75-100 3-4” 100-125 ; 125-150 ; 150-175 ; 175-200 ; Specifications: Guarantee ; 6 Months without abuse Packing ; Plastic Box Calibration ; In house.
Elastic Properties Of Deflected Beam Apparatus
Apparatus consists of a mild steel beam 2.5cm x 3mm in cross section and 100cm long, pinned to two supports 70cm apart situated symmetrically. One of the ends can be fixed or given a known slope by applying a known moment at the end with the help of suspended loads. At the other end also a known moment can be applied. Vertical loads can be applied at various points along the span of the beam. A dial gauge with 25mm travel (with a magnetic base) may be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights
