XTEMOS ELEMENT
AJAX PRODUCTS TABS
Microscope Slide Set Basic
Set of 25, Microscope slides created
Biology syllabus with following subjects.
Supplied in Box.
Kidney TS
Allium root tip LS, mitosis
Kidney VS, injected
Allium root tip, squash
Squamous epithelium
Moss leaf, for cells (check cells)
Leaf epidermis
Human blood smear
Stem, TS, separate bundles
Artery and vein
Mucor, asexual
Monocot (Zea) root, TS
Lung through bronchiole VS
Hair insertion
Ovary VS
Testis TS
Spinal cord, TS
Pancreas
Leaf, TS
Stem, LS old
Dicot stem apex, LS
Lung injected
Lily anther, Tetrad
Dynamic Trolley, Wooden
Heart With Artery Blockage Models
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Frequency Shift Keying Modulation And Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Frequency Shift Keying Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Expansion of Liquids Apparatus
Description
Comprising five removable glass tubes in a sliding frame and supported in a water trough. For demonstrating the different thermal expansions of various liquids. Comprising five glass tubes in a frame and supported in a water trough. The frame has a special sliding arrangement with clips to hold glass bulbs with tubes. The bulbs can be easily removed and fixed and have funnel formation on top for easy filling.
Pulleys Bench Clamp Fitting
Photon Energy Array
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Leaf Anatomy
Force Table
To verify the law of composition and resolution of forces consisting of a aluminium table 40cm in dia.
its raised rim has a engine divided scale, graduated in 360° mounted on heavy vertical support rod & tripod base provided with leveling screws.
Body under study in a ring in center of the table fastened by cords passing over four pulleys attached with the table.
Complete with four pulleys, four weights hangers twelve weights (2x10gm, 2x20gm, 4x50gm, 4x100 gm.)
Platinum Resistance Thermometer
Demonstration Gear Model System
Description
A series of models to demonstrate different gearing systems. With transparent slideplates, the gears may easily be seen and where necessary there is an index on the primary and secondary shafts to show the change in the direction of rotation and the relative speed of rotation. A simple three-speed and reverse-gear system using spur gears. Reverse gear is obtained by interposing a small lay-shaft mounted pinion between the two main shafts. Gear selection is by means of a short ball-ended lever.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Pin Hole Camera
Fuel Supply System Petrol MPFI Type
Fuel Supply System Petrol MPFI Type (Actual Working Model) Multi Point Fuel Injection
This is an actual working model of fuel supply system of a MPFI petrol engine. The parts details is as under :
1. Fuel Tank
2. Fuel Filter
3. Motorised Fuel Pump
4. Pressure Gauge
5. Fuel Rail
6. Fuel Injectors
7. ECU
8. Igniter & Ignition Coil
9. Distributor
10. Spark Plugs
11. Power Supply
12. Fuel Gauge & Control Panel
This model helps the student to understand about the parts & working of MPFI system. It is specially designed for demonstration purposes. The model will be supplied with key card & very interesting literature regarding working.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Candle Holder
Ticker Tape Timer
For the measurement of velocity and acceleration, using timing marks made on a moving paper tape by a vibrating striker.
Designed to operate on a 12V A.C. supply and uses the mains frequency as its timing standard.
The unit is housed in a moulded case including mounting flanges.
The top of the case caries a tape guide which incorporates a carbon paper disc support and an adjustable anvil for the striker point.
All moving parts are fully enclosed and a pair of 4mm sockets are provided on the side of the case for connection of the electrical supply.
Supplied with a roll of self marking paper tape.
Paper tape : 100m of paper tape, 9.5mm wide.
Carbon Paper Discs : 40mm diameter, with 3mm hole, cut from long life plastic film type carbon paper.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Magnetic Kit
Description
A kit of magnets and accessories in a storage tray.Contents :
1. One Horseshoe magnet, 100 mm, with keepers.Two ceramic bar magnets, 75 mm long. 2. Three ceramic ring magnets, 38 mm diameter 3. Two plotting compasses clear both sides, 19 mm diameter 4. One lodestone specimen. 5. One pack Iron Filing. 6. One each strip of Iron, Aluminium, Zinc and Copper metal.
Heat Pipe Apparatus
Heat Pipe Apparatus:
Heat pipe is an interesting device, which is used to transfer heat from one location to another.
The apparatus consists of three pipes, viz. A heat pipe, copper pipe and stainless steel pipe. Ail the pipes have same physical dimensions. Copper and stainless steel pipes serve the purpose of comparison of heat pipe performance. All pipes are mounted vertically with a band heater at lower end and water filled heat sink at upper end. Nearly isothermal operation of heat pipe is clearly visualized from longitudinal temperature distribution of the pipe.
SPECIFICATIONS:
1.Heat pipe – Stainless Steel pipe, 25 mm O.D., 450 mm. Long. Sealed at both ends, evacuated and filled partially with distilled water – one No. 2.Copper and stainless steel pipe of same size as that of heat pipe – one each. 3.Equal capacity heater at bottom end of each pipe. 4.Water filled heat sinks at upper end of each pipe.Measurements and controls
a) Dimmerstat to control heat input to all the heaters – 4 amp. Capacity One No. b) A voltmeter and an ammeter to measure input to heaters One each. c) Multichannel digital temperature indictor to measure temperatures along the length of pipes.Four thermocouples are provided on each pipe. v Thermometers to note down water temperatures in heat sinks – 3 Nos.Services Required:
230 VA.C. Single Phase supply. Floor Area = 1 m X 0.5m X 0.5 m height.
Constant Pressure Air Thermometer
Description
Jolly's thermometer bulb connected via a 3-way stopcock to mercury tube. Sliding indicator on right hand limb with reservoir sliding on vertical clamping rod. Metal vessel to surround the bulb. Mounted on wooden stand, height 740 mm. All glass parts except reservoir are made of borosilicate glass.
Linen Tester
Description
These are collapsible pocket magnifiers. The optical system is a single element, glass Double Convex Lens. The housing is made of machined, black high grade plastic for a high finish look. These magnifiers fold flat to fit in your pocket. Scales are etched on the inner faces of the viewers base.
Optical Bench, wooden
Description
A wooden base board with one meter scale divided into mm with following accessories: One each White face object and receiving screens each 150 x 100 mm with aperture mounted on wooden base with an index mark. Two plane mirrors 150 x 100 mm mounted as above. One lens holder V shaped, wooden. One needle vertically mounted in a short wooden rod on base. One candle holder on base. The components have the same optical center height.
