XTEMOS ELEMENT
AJAX PRODUCTS TABS
MCT Twin Rack
We provide Twin Purpose MCT Twin Racks for both 0.5 & ml. & 1.5 ml. micro centrifuge tubes.
Each side has 108 holes for 0.5 & 1.5 ml. MCT's respectively.
The transparent top of MCT Twin Rack provides and excellent view and a protection cover for the tubes stored.
Each face of the base has a unique alpha-numeric index for easy identification of the tube.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| MCT Twin Rack (Rack for 0.5 ml & 1.5 ml MCTS) | 4 | |
| MCT Box (Rack for 100 MCTs of 0.5 ml) | 4 | |
| MCT Box (Rack for 64 MCTs of 1.5 ml) | 4 |
Six Phase Power Analyzer
Specification
• 6 phase measurement @ 50Hz • 6 voltage inputs (250V AC max., 50Hz) & 6 AC current inputs (5A max) • Zero crossing output for both voltage and current waveforms • 6Nos of phase sensing circuits provided to measure the phase difference of 2 waveforms • Signal Conditioning for Torque & Speed (QEP, Proximity, Optical) • After Signal Conditioned, 6 voltage outputs, 6 current outputs, 12 zero crossing outputs & 6 phase sensing outputs are terminated at 34 pin and 26 pin FRC connectors • Power input through banana sockets • Housed in a sleek cabinet
Buchner Funnel
Moulded in Polypropylene, our Buchner Funnel are highly sought after funnels in the market.
These two piece Buchner Funnel are light weight, easy to clean & autoclavable.
The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing.
The base of top portion has a perforated filter plate.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Buchner Funnel 70 mm | 12 | |
| Buchner Funnel 110 mm | 6 | |
| Buchner Funnel 90 mm | 12 |
Accessories Set For Demountable Transformer
Description
Comprising 1 welding coil of 5 turns on former with insulated handle and short-circuiting pins,1 annular melting trough with insulated handle to show heating by induction,1 jumping ring which is thrown clear when primary current is started and a floating ring which remains freely suspended when primary current is flowing.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Steering Geometry Wheel Alignment Trainer
Steering Geometry & Wheel Alignment Trainer
With the help of this trainer the students can learn about steering geometry and practically perform wheel alignment using various tools.
(A) Turn Tables
(B) Toe In Toe Out Gauge
(C) Magnatic Caster Camber Gauge
(D) Manual Steering System With Four Wheels
(E) Tool Kit
Human Head And Neck L. S.
Measuring Cylinder (Round Base)
We are a credible Exporter and Supplier of Measuring Cylinder (Round Base).
Measuring Cylinder is laboratory equipment used to measure the volume of a liquid.
It is more accurate and precise than laboratory flasks and beakers.
Sometimes, Measuring Cylinder is also used to indirectly measure the volume of a solid by measuring the displacement of a liquid.
Available in high grade polypropylene or polymethylpentene material, our Measuring Cylinder comes with molded graduations in variegated divisions and capacities.
They are transparent and possess optimum resistant against chemical.
They have a round base and pouring spout.
We make available Measuring Cylinder as per the requirement at the best market prices.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Cylinder 10 ml | 24 | |
| Measuring Cylinder 25 ml | 12 | |
| Measuring Cylinder 50 ml | 12 | |
| Measuring Cylinder 100 ml | 12 | |
| Measuring Cylinder 250 ml | 6 | |
| Measuring Cylinder 500 ml | 4 | |
| Measuring Cylinder 1000 ml | 3 | |
| Measuring Cylinder 2000 ml | 2 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
HVDC Transmission Line Simulator
The HVDC Transmission due to its advantages, like long distance transmission, interconnect different power systems (like 50Hz and 60Hz), more energy transmits than AC, less losses, make it essential for the students to study & understand the operation of HVDC. Vi Micro have introduced a trainer for this purpose “HVDC Transmission Line Simulator”
HVDC Transmission Line System consists of
• Generating Station Module • Rectifier Station Module (SCR or IGBT Based) • Simulated HVDC Transmission Line Module • Inverter Station Module • Loading ModuleGenerating Station Module
• It consists of a 3Φ, 415V Variable AC source, 1.5 KVA step up transformer, a Multifunction Meter (To measure various electrical parameters of • Generating side or sending end) & a Miniature Circuit Breaker. • Earth Fault Relay is provided for protection against Earth Fault. • The module is covered with metallic enclosure and sticker represents the prime operation of the module. Safety power plug-sockets are provided.Rectifier Station
• Two no’s of fully controlled SCR based bridge rectifiers provided to convert 3Φ AC to DC for HVDC transmission. • Two 6 Pulse SCR bridges connected in series • Can be configured as 12 Pulse Rectifier • A 3Φ, 1.5KVA transformer with (Y) primary and dual (Δ, Y) secondary are provided to reduce harmonics • The module is covered with metallic enclosure and sticker represents the prime operation of the module.
Cross Staff
Description
The Cross-Staff was used at sea from the beginning of the 16th century until the first half of the 18th century. It was used to measure the sun's altitude, especially at the meridian passage. With the knowledge of the sun's declination, the mariner could then obtain his latitude. The staff is original, with the inscription. The cross pieces are replicas. Different cross pieces were used depending on the altitude. A different scale is on each side of the staff.
Stand For Optical Bench Accessories
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
TMS320C6747 Based DSP Trainer
KEY FEATURES:
• TMS320C674x Fixed/Floating-Point VLIW DSP Core Operating upto 300MHz • 64 General-Purpose Registers (32 Bit) • Six ALU (32-/40-Bit) Functional Units • Two Multiply Functional Units • Instruction Packing Reduces Code Size • All Instructions Conditional • Hardware Support for Modulo Loop Operation • On Chip RTCON-CHIP MEMORY:
• Two Level Cache Memory Architecture • 32K-Byte L1P Program RAM/Cache • 32K-Byte L1D Data RAM/Cache • 256K-Byte L2 Unified Mapped RAM/Cache • 128K-Byte RAM Shared MemoryON-BOARD FEATURES:
• Boot mode selection Switch • 1M x 16 Bit x 4 Bank SDRAM. • 10/100M Ethernet Interface • USB1.0 & USB 2.0 Interface. • Embedded JTAG for Emulation. • 8 LED & 8 Switch for user Interface. • Expansion Connector For GPIO & Peripheral Interface. • VSDA Expansion Card for 4 Channels ADC & 4 Channels DAC. • Provision to connect external JTAG Emulator • RS232 Serial Port Interface
Human Teeth With Tongue
Gas Tap, Regular
Description
Made of brass with superior black powder coating. Regular construction having lever handle with locking arrangement to ensure lever rotation does not go beyond 90°. Output nozzle having 4mm bore. Inlet 3/8 X 26. Flange diameter 50mm with two holes to fix on bench or any other surface with screws. Provided with adapter (6/8, 3.8mm bore) and corresponding nut (8mm bore). Designed to operate at pressure up to 2 psi (0. 14kg/cm2). Suitable for use with coal gas, natural gas and L.P.G.Particulars
Gas Tap, One Way Gas Tap, Two Way Gas Tap, Three Way Gas Tap, Four WayXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Rear Axial Assembly With Differential Gear
Rear Axial Assembly With Differential Gear Fully Floating Type – Actual Cut Section
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
CAVITY BLOCK
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Continuously Variable Transmission
Continuously Variable Transmission – Actual Cut Section
The working of CVT is shown with the help of actual parts assembled on square iron pipe frame. The CVT is driven through permanent magnet D.C. motor with variable speed control drive. RPM Sensor With Digital Display Is Also Provided. All the necessary parts of CVT are shown in actual working form. This model helps the student to understand the working of the CVT very easily. It is specially made dissectible for demonstration purposes.
