XTEMOS ELEMENT
AJAX PRODUCTS TABS
Turbine/Pump Unit
Description
For use as a water turbine to drive a generator producing electricity or for use as a pump driven by a motor and raising a head of water to produce potential energy. The rotor has eight 'bucket' blades and is housed in a block turbine chamber with a clear Perspex front. Two inlet tubules (for turbine and pump operation respectively) and one outlet tubule are provided and the shaft carries a 15 mm. diameter pulley. With driving belt.
Light Dependent Resistor Unit (LDR)
Laboratory Timer
This is a versatile timer quartz crystal controlled for very high accuracy.
which can be used for conducting experiments related to timing and motion with high accuracy.
Can be used for G by free fall liner air tracks, dynamic trolleys etc.
This timer has an in built power supply for the coil for G by free fall apparatus and lamps for photo gates.
Range : 0.001, 0.01, 0.1 Sec.
The above timer has a built in power source for photo gates and the coil for 'G' by free fall apparatus.
Mini Vertical Electrophoresis
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Mirror, Plane
Human Circulatory System
TMS320C6713 Based DSP Trainer
KEY FEATURES:
• Highest performance floating point Digital signal processor (DSP) • 150 MHz Clock rates • 6.7ns Instruction cycle time • 16 bit external memory interface (EMIF) • 16 bit Host-port interface (HPI) • Two multichannel Audio serial ports (MCASPs) • Two multichannel Buffered serial ports (MCBSPs) • Inter integrated circuit (I2C) ModuleONCHIP MEMORY:
• 4KB L1P Program cache memory • 4KB L1D data cache memory • 256KB L2 unifies cache mapped RAMON BOARD FEATURES:
• 512Kx 8bit FLASH for monitor Program • 4M x 16 bit SDRAM for External Memory. • 8 way DIP switches & LEDs to user interface • LCD interface, I2C RTC • Stepper motor Interface • On board USB and UART for serial communication • PCM3002 Audio codecXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Generation Of Involute Gear Tooth Profile
This board illustrates the process of cutting of involutes Gear Teeth, by use of rack type cutter It consists of 3 white acrylic discs A, B, C. having pitch circle diameter 450 mm, 300 mm & 200 mm respectively. A gear tooth profile with module 25mm can be traced out on a peace of paper placed between disc and cutter. An affect of Interference and Undercutting on correct profile of gear tooth can be studied from the profiles traced.
Two Hinged Arch Apparatus
DESCRIPTION:
The two hinged arch is a statically indeterminate structure of the first degree. The horizontal thrust is the redundant reaction and is obtained y the use of strain energy methods. Two hinged arch is made determinate by treating it as a simply supported curved beam and horizontal thrust as a redundant reaction.EXPERIMENT:
• To study experimentally a two hinged arch for the horizontal displacement of the roller end for a given system of loading and to compare the same with those obtained analytically. • To obtain the influence line ordinates for horizontal thrust experimentally in a two hinged arch by moving a load along the span and to compare the same with those obtained theoretically.TECHNICAL SPECIFICATION:
• Apparatus has a span of 100cm and rise 25cm. • Both ends should have hinge but one of the ends should also be free to move longitudinally. • A lever arrangement fitted at this end for the application of known horizontal inward force for measuring the horizontal thrust. Along the horizontal span of the arch various points are marked at equidistant for the application of load. • This being a statically indeterminate structure of the first degree. • A dial gauge with 25mm travel (with magnetic base) is to be supplied with the apparatus. • Mild steel apparatus complete with a supporting stand and a set of weights.
Resistance Substitution Box
Description
Resistance Substitution Box is a convenient instrument for determining the desired resistance values in circuits under design or test. This resistance substitution box has 12 different values 100Ω , 220 Ω , 470 Ω , 1 kΩ , 2 kΩ, 4 kΩ , 10 kΩ , 22 kΩ , 47 kΩ, 100 kΩ , 220 kΩ and 470 kΩ . All resistors are precision 1% resistors and are of 1 watt rating Selected resistor can be attached in any circuit with 4 mm two red safety sockets.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Lubrication System Of An Automobile
In this model the working of lubrication system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a lubrication system of a car are shown in actual working form. This model helps the student to understand the working of the lubrication system of a car very easily. It is specially made dissectible for demonstration purposes.
Engineers Dumpy Level
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Polariser and Analyser (Polaroid)
Spartan 6 Trainer Kit
Features
• 16 Nos. of digital input using slide switches with LED indication • 16 Nos. of digital output using discrete LEDs • 16× 2 LCD is provided for display the text message. • One Reset Switch • One switch for giving manual clock • FPGA configuration through - On board Xilinx USB to JTAG Programmer with isolation to configure FPGA - On board Flash Prom XCF04S (Programmable through USB to JTAG programmer) • Total 186 I/O Pins: 100 Pins used for integrating peripheral like LED, Switches etc., balance pins are available to user • In 3nos of 20 pin header. • 1 No of 26 pin header to interface VLIM cards like Traffic Light Controller / On-board TLC (factory settable). • On board programmable PLL oscillator from1 MHz to 100MHz using jumpers • 4Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor drive provided on board (Motor Optional) • 4x4 matrix key provided • On board I2 C RTC Interface • On board Temperature Sensor Interface • SPI Based Analog to Digital Converter
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Ruhmkorff Coil
Description
Ruhmkorff Coil produces pulses of high voltage spark from low voltage DC source (6 – 12 V DC). It is suitable for use with gas-filled discharge tubes, vacuum tubes, eudiometers and for general laboratory work. Includes an adjustable vibrator system, primary current polarity reversal, on-off switch, a capacitor enclosed in the box and special alloy contacts. Spark gap at the discharge points can be adjusted by sliding rods back and forth. Spark Length 15 mm.
