XTEMOS ELEMENT
AJAX PRODUCTS TABS
Resistance Coils
Direct Vision Spectroscope
Instrument Tray
Acquire from us comprehensive range of Instrument Tray which is well reckoned for its quality.
This Instrument Tray has cover which fits into groove of trays to minimize spillage of material.
Smaller size can be used to sterilize small instruments whereas the larger size allows pipettes to be fully immersed in disinfectant prior to sterilizing.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Instrument Tray 220 x 150 x 70 mm | 2 | |
| Instrument Tray 450 x 150 x 70 mm | 2 |
Variable Inductor
Description
The enamelled wire winding and a cylindrical soft iron core are built into this unit. The iron core displacement inside the winding can manually adjusted by the knob to give precise measurements up to 1.3 H. Connections are made through 4 mm sockets.Specifications:
Resistivity: 0.0165 W/m; Inductance: 0.15 to 1.3 H; Voltage: 30 V AC or 60 V DC.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Conical Bottom Centrifuge Tube
Centrifuge tubes with conical bottom are available in two sizes i.e 15 ml. & 50 ml.
Moulded in Polypropylene, these tubes are clear, strong & safe.
These autoclavable tubes are provided with printed graduations on the outer surface.
The built in seal ring in the cap makes these tubes absolutely leakproof.
These tubes can withstand forces upto 7500xG & 12000xG for 15 ml. & 50 ml. tubes respectively.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Centrifuge Tube Conical Bottom - 15 ml | 100 | |
| Centrifuge Tube Conical Bottom - 50 ml | 100 | |
| Centrifuge Tube Box for 15 ml tube | 4 | |
| Centrifuge Tube Box for 50 ml tube | 4 |
Interference Undercutting
The board shows the demonstration of this phenomenon of Interference and Undercutting. When we rotate the teeth in anticlockwise direction, as the teeth is undercut is gives us a smooth working. When we give a rotation in clockwise direction, we can observe that the rack tip will be resisted by the tooth flank thus giving interference.
Lubrication System Of An Automobile
In this model the working of lubrication system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a lubrication system of a car are shown in actual working form. This model helps the student to understand the working of the lubrication system of a car very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Germanium Diode Unit
TMS320C6713 Based DSP Trainer
KEY FEATURES:
• Highest performance floating point Digital signal processor (DSP) • 150 MHz Clock rates • 6.7ns Instruction cycle time • 16 bit external memory interface (EMIF) • 16 bit Host-port interface (HPI) • Two multichannel Audio serial ports (MCASPs) • Two multichannel Buffered serial ports (MCBSPs) • Inter integrated circuit (I2C) ModuleONCHIP MEMORY:
• 4KB L1P Program cache memory • 4KB L1D data cache memory • 256KB L2 unifies cache mapped RAMON BOARD FEATURES:
• 512Kx 8bit FLASH for monitor Program • 4M x 16 bit SDRAM for External Memory. • 8 way DIP switches & LEDs to user interface • LCD interface, I2C RTC • Stepper motor Interface • On board USB and UART for serial communication • PCM3002 Audio codec
Insect Display & Storage Showcase
Description
For pinning of insects on bottom. White Hardwood / Teakwood with glass in wooden frame on top & MDF sheet bottom is nicely polished. Bottom lined with 8 mm thick soft pinning, washable EVA Sheet. Inside glazed white. Raised wooden wall with holes for insecticide inside bottom to make box air tight and pest proof. Fitted with brass hinges, index card holder & clips. Size 53x45x9cm Size 45x30x6.5cm Size 38x25x6.5cm Size 30x23x6.5cm
CNC Mill Trainer2
CONTROLLER:
Type of Controller System : PLC based system Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive Input to Stepper : Optically lsolated motor drive : TTL Compatible Runing Speed Control : Computer control with software Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided Real time tool path : Provided simulationTABLE:
Length x Width : 450 x 175 (approx.) Clamping Area : 360 x 130 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron Distance from sindle : 700 mm/min Tool Change : Quick Change , Manual Centerline to column : 140mm Weight in kg : 550kg. Dimension in mm : 850 x 800 x 1630SPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPMXTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
pH Meter, Digital, Portable
Highly stable and accurate.
Digital display.
Technical Specification
Display: 3½ digit LCD Range: pH : 0 to 14.00 Resolution: pH : 0.01 Accuracy: pH : ±0.01 Compensation: Manual 0 to 100° Slope Correction: 80 to 120% Power: 1 x 9V Battery Dimensions: 85 x 28 x 165 mmAccessories
Combination pH Electrode Operation Manual
Ray Box
Description
A ray box consisting of a rugged sheet metal box with a 12 V, 10 W festoon type axially straight filament lamp. Fitted with a cartridge for holding 4 types of slits – single, double, triple and wide slots Ideal for quick adjustment to get the desired ray/beam type Includes colour filters Also included is a convex cylindrical collimating lens for adjusting the beam to obtain long clear tracks which can be parallel, converging or diverging.
Ball & Ring GRAVESANDE
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Rheostat, Protected With Single tube
Wheatstone Bridge
Specification
• Four arms with one unknown arm to connect the unknown resistance • Two range selection arms provided to select the nearest range of unknown value. • Range of Measurement : 5Ω-100KΩ • Accuracy (Min to Max.) :±0.2 ± 5Ω • Tolerance : ±5% • Digital voltmeter (Range +5V to - 5V) is provided to indicate the Balance conditions • Built-in power supplyXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
DNA Model on Stand
Description
(Deoxyribonucleic acid) Model showing segment of D.N.A. molecule mechanism of replication, to show the double helix coiling and reforming, nucleotide and the structural formula to show the molecular shapes and bonds and angles distorted. Complete model arranged on a board, fully labeled.
Volumetric Flask
We introduce our special quality Volumetric Flasks.
These Volumetric Flasks are blown in Polypropylene and are strong, unbreakable and have good contact clarity.
These autoclavable Volumetric Flasks are provided with screw caps to prevent leakage.
These Volumetric Flasks are economic as well.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Volumetric Flask 25 ml | 6 | |
| Volumetric Flask 50 ml | 6 | |
| Volumetric Flask 100 ml | 6 | |
| Volumetric Flask 250 ml | 3 | |
| Volumetric Flask 500 ml | 3 | |
| Volumetric Flask 1000 ml | 2 |
Front Axel Assembly With Differential Gear
Front Axel Assembly With Differential Gear (Actual Cut Section)
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Manual Steering System
Steering System – Actual Working
Manual Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Power Steering System
Power Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
ZigBee Sensor Battery Board
ZigBee is one of the advanced Wireless technology and CC2530 is the Second Generation System On chip, Which has integrated Microcontroller with IEEE 802.15.4 Compliant and ZigBee RF transceiver. Vi ZigBee development Kit includes the hardware using CC 2530 and software to support the ZigBee protocol.
Features
• 2-AA battery holder integrated • 2 user LEDs • 2 user key • Light sensor • ADC Trim pot • RF Module connectivity • USB to serial connector • ADC channels are terminated via 3 pin connectors • All the IO lines are terminated via 20 pin header • 3 pin connector provision for I2C and SPI interface.
Microprocessor Photo Colorimeter
Microprocessor Photo Colorimeter is a compact and easy to operate instrument for Photo Colorimeter analysis of any concentration.
The output is available on a 16 x 2 line alphanumeric backlit LCD display in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K Factor.
This instrument has 100 sample storage memory and printer output facility for printing data with any dot matrix printer.
The use of microcontroller has made it extremely versatile and accurate instrument.
10 mm path length matched test tubes are used for sample and blank.
The use of high class standard wide range glass filters covering 400 to 700 nm give extremely good results.
The filter setting is controlled by a rotating disc having 8 filters.
An automatic shutter is provided to stop the light reaching the photocell, when test tube is not inserted in the tube holder.
This increases the life of photocell tremendously.
Facility has been provided to store the last K Factor and the standard concentration value.
User can also enter any known ‘Factor’ for a test, thereby eliminating the need to re-run the standards again and again.
Specifications
| Wavelength Range | 400 - 700 nm | |
| Resolution | %T: 1, Abs: 0.01, Conc.: 0.01, K Factor: 0.01 | |
| Photometric Range | %T: 0 - 100, Abs: 0 - 1.99, Conc.: 0 - 1999, K Factor: 0 - 1999 | |
| Detector | Wide range Silicon Photodiode/Photocell | |
| Display | 16 x 2 line alphanumeric backlit LCD display | |
| Keyboard | Soft Touch Membrane Keys | |
| Data Storage | Up-to 100 Samples (0 - 99) | |
| Light Sources | 6.8 V, 0.3 Amp Tungsten Lamp | |
| Sample System | 10 mm path length matched glass test tube | |
| Filters | 400, 450, 490, 520, 540, 570, 620, 680 nm | |
| Printer Interface | Centronics Parallel Printer interface for Dot Matrix Printer | |
| Serial Interface | RS-232C interface (optional available on request) | |
| Power | 230 V ± 10% AC, 50 Hz | |
| Dimensions | (L x B x H) 240 x 254 x 90 mm (Approx.) | |
| Weight | 2.5 Kg (Approx.) |
