XTEMOS ELEMENT
AJAX PRODUCTS TABS
Orfice Mouthpieces Apparatus
DESCRIPTION:
An orifice is an opening made in the side or bottom of tank, having a closed perimeter, through which the fluid may be discharged. A mouthpiece is short tube fitted to a same size circular opening provided in a tank so that fluid may be discharged through it. Orifice and mouthpiece are used to measure the rate of flow of liquid. The apparatus is designed to measure the co-efficient of discharge of orifice & mouthpiece. The apparatus consists of a supply tank, at the side of which a universal fixture for mounting orifice or mouthpiece is attached. A centrifugal pump supplied the water to supply tank. Head over the orifice/mouthpiece is controlled by a by pass valve provided at pump discharge. A measuring tank is provided to measure the discharge. A gauge for measuring X and Y co-ordinates of jet from the orifice is provided, which is used to calculate Cv of orifice.SPECIFICATIONS:
[1] Supply Tank – 0.4 X 0.3 X 0.5m height [2] Orifice – 8mm and 10 mm. [3] Mouthpiece (a) LID = 4 (b) L/D = 1 (c) Bordas mouthpiece. (d) Convergent mouthpiece. [4] X-Y gauge for orifice jet co-ordinates. [5] Measuring tank of suitable capacity OR a calibrated water flow meter. [6] Sump tank of suitable capacity. [7] 0.5 HP pump with valve. A technical manual accompanies the unit.SERVICES REQUIRED:
[1] Flow surface 2 mtrs. X 1 mtr. X 1.5 mtrs. height. [2] 230 Volts, 5 Amp. Stabilized AC. Power Supply.Digit Counter Micrometer (DCM)
Description
Micrometer is used to measure short lengths accurately Technical Details : Printed Marking on the Vernier Scale Carbide Tipped Measuring Faces Blue Metallic Finish Frame With Locking Clamp and ratchet stop Least Count : 0.01mm With Digit Counter to withstand abuse at work Sizes : 0-2 25-5 50-7 75-100 Specifications: Guarantee ; 6 Months without abuse Packing ; Plastic Box Calibration ; In house.Flower & Embryology
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Typical flower showing parts Fertilization showing germination of pollen T.S Anther & its development Germination of pollen grain and development of male Gametophyte Megasporogensis Development of embryo and endosperms Development of embryo in sagittaria Embryo in Capasella Microsporangium Types of emchryo sacs Forms of Androecium Form of Gynaecium Development of Monocot embryo Placentation Aestivation L.H. Datura Inflorescene Part – I showing simple racemose & simple cymose Inflorescene Part – II showing compound & special Pollination different types Forms of ovules Forms of Calx & corollaXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Crystal Model Set
We offer Crystal Model Set to the esteemed clients.
The Crystal Model Sets contain different colored jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material : Polyethylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Crystal Model Set - Diamond | 1 | |
| Crystal Model Set - Sodium Chloride | 1 | |
| Crystal Model Set - Graphite | 1 |
BEAKER TONG
Demountable Transformer
Description
This heavy duty demountable transformer can be used for the study of transformertheory and many other alternating current phenomena. This kit consists of: 1. A magnetic circuit made of highly permeable U shape metal sheet, which can be closed using two clamps with tightening screws. 2. Section: 40 x 40 mm with 150 mm length and 170 mm height. 3. One coil of 6000 turns with maximum current of 0.2 A. Intermediary coil of 2000 turns output. 4. One coil of 600 turns with maximum current of 2.5 A, which is mainly used to create the primary of transformer. 5. One coil of 1200 turns with maximum current of 1.25 A, fitted with intermediary 400 and 800 turns outputs. 6. One coil of 72 turns with maximum current of 12 A, fitted with intermediary 6, 30, 54 and 66 turns outputs. 7. Power supply cable.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Corner Cube Reflector
Description
To demonstrate principles of light and reflection, The reflector features three front-surfaced triangular mirrors mounted at right angles to one another on a hardwood base. Light beams hitting any of the mirrors from any angle are bounced off the other two mirrors and reflected back in the same direction they came from. With instructions.Optical Set For Ray Track Apparatus
Description
Comprises a white painted wooden board mounted on nonskid plastic feet, and a removable turntable about 170 mm in diameter. Two orthogonal lines along the turntables diameter divide it into four equal quadrants Just beyond the rim of the turntable, a circular scale graduated 90 – 0 – 90 – 0 – 90 °, with 1° subdivision, Also includes a ray box with a 12 V, 24 W bulb Supplied complete with a cylindrical convex lens with focal length approx. 75 mm and two double slits, giving one wide beam slit and one each of single, triple and five slits An optical set is available separately, comprising of one each of rectangular, semi-circular, right-angled triangular – 90 ° 45 ° 45° trapezoidal, biconvex and biconcave prisms.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Survey Compass
Description
• Compass survey is a method of surveying by taking bearings and linear distances to produce plan. • Bearing is measured using prismatic compass, while the linear distance is measured using measuring tape. • Bearing in compass surveying means angle is made by chain line or survey line by referring it to magnetic meridian or magnetic north.Flexible AC Transmission Systems
Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.
It consists of
• Generator Set-up (3Φ AC Source) • Simulated Transmission line • IGBT Based VSI Power Module • Series & Shunt Transformers with LC filter • RLC - Load setup • TMS320F2812 DSP Controller • Upgrade possibleGenerator Set-up (3Φ AC Source)
• 3 phase Alternator DC Motor Drive setup 3Φ / 1KVA / 1500 RPM / Salient Pole type coupled with 2HP/220V DC shunt motor and with suitable drive from 1Φ AC input supply with • suitable speed control, sensor and digital speed indicator. • Digital controller with IGBT based DC voltage controller for DC motor Armature Voltage variation 0-200V DC/10A & Alternator field voltage variation with necessary instruments • /meters/indicators.Alage & Fungi
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Chlamydomonas , General structure & Life History Ulothrix general structure and L.H. Oedogonium Life Cycle Spirogyra structure & conjugation Chara structure & L.H. Nostoc structure & L.H. Ectocarpus structure & L.H. Dictyota structure & L.H. Fucus structure & L.H. Rhizopus structure & L.H. Mucor structure & L.H. Yeast Bacteria – I showing structure and forms Bacteria – II showing reproductive Virus types, structure & L.H. Penicillium Albugo(Cystopus) structure & reproduction Puccinia graminis structure & L.H. Agricus structure & life historyLogic Gates Trainer
Logic Gates Trainer has been designed to study logic gates and applications. This trainer board is designed to verify the truth table of various logic functions, to prove De-Morgan’s theorem, Half adder and Full adder by using logic gates. The board is absolutely self-contained and requires no additional apparatus. 12 V / 1 A DC adaptor is required to operate it.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Rack Pinion Type Steering System
Rack & Pinion Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Power Steering System
Power Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Hand Microtome
Description
A handy and simple model with wide flat top, suitable for sectioning of fresh tissues. Screw drum is graduated in 100 close divisions and will cut the specimen in steps of 10 microns each. Complete with a single edged razor blade. But with differential screw, screw drum is graduated in 50 wide divisions.Draining Rack
Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory.
The back plate of this Draining Rack has 20 holes into which pegs are tightened with the help of screw-nuts.
Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube.
This rack not rot, stain or rust.
Material : Acrylopitrile Butadiene Styrene / Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Draining Rack | 1 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
















