XTEMOS ELEMENT
AJAX PRODUCTS TABS
Hydraulic Drum Brake Actual Working Single Drum
Verification Clarke S Maxwell Reciprocal Theorem
Apparatus for Verification of Clarke’s Maxwell Reciprocal Theorem
Apparatus consist of a mild steel beam 100cm long and 1.25cm x 4mm in cross section with graduations at every 10cm along the length. It should be supported on two knife edge supports 70cm apart with a 30cm overhang on one side. Reciprocal theorem can be verified by direct measurements of the deflections of various points with the help of a dial gauge due to a load placed at the reciprocal points. A dial gauge with 25mm travel (with a magnetic base) should be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights.
Experimental Capabilities: To verify Clerk’s Maxwell reciprocal theorem by means of a mild steel be
Plate Type Heat Exchanger Apparatus
The unit consists of a plate type heat exchanger, in which cold fluid is cold water and hot fluid is hot water, which is obtained from geyser. The inlet and outer connections of the fluids are positioned so as to make the exchanger counter flow type. Hot and cold fluids pass between alternate plates various measurements provided enables the students to determine heat transfer rate, LMTD, heat transfer coefficients and effectiveness of the heat exchanger.
SPECIFICATIONS:
1.Heat Exchanger- S.S. Plate heat exchanger wiles nos. of 200 X 400mm. 2.Geyser to obtain hot water – 3 KW capacity. 3.Calibrated water flow measuring vessel 4.Thermometers to measure inlet and outlet temperatures of fluid. 5.Flow controls valves. A technical manual accompanies the unit.OPTIONAL ACCESSORIES:
Rotameters to measure water flow rates instead of measuring vessel. Multi channel digital temperature Indicator to measure the temperatures instead of thermometers.SERVICES REQUIRED:
1.Floor space 1.5m. X 1m, 2.230V, 15A, AC supply with earthing connection, 3.Water supply at the rate of about 10 lit/min at constant heat.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Micro Slides Blood Grouping
Coelenterata
Anti Lock Braking System ABS Trainer
Anti Lock Braking System (ABS) Trainer
All modern car are now days fitted with anti lock braking system. This trainer helps the students to understand the working of ABS. The trainer consists of the following parts.
1. Control Panel,
2. Break Light,
3. ECU,
4. ABS Hydraulic Activator,
5. Break Lever,
6. Pressure Gauges,
7. Common Pressure Gauge.
An anti-lock braking system (ABS) is a safety system that prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking. A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. ABS offers improved vehicle control and decreases stopping distances on dry and especially slippery surfaces for many drivers, but on loose surfaces like gravel and snow-on-pavement it can slightly increase braking distance, while still improving vehicle control. Stopping a car in a hurry on a slippery road can be very challenging. Anti-lock braking systems (ABS) take a lot of the challenge out of this sometimes nerve-wracking event. In fact, on slippery surfaces, even professional drivers can’t stop as quickly without ABS as an average driver can with ABS.
Gynecological Examination Model
Description
Gynecological Simulator is ideal for all aspects of gynecological education, training and competency evaluation, including the bimanual exam, speculum exam, and cytology sampling. Students will appreciate the unprecedented realism of its internal and external features, while instructors will love the interchangeable components that make up its unique modular system. This simulator allows you the flexibility of customizing your scenarios with use of included makeup, blood, and thickener. Additional specialized modules are also available (STD, post-menopause, S.A.N.E., and pre-puberty). Starter unit includes torso, normal genital pad, normal pelvic organ block with vagina and rectum, abdominal gel pad, fabric abdominal pad, abdominal overlay skin, seven uterus/cervix pieces (normal/normal with discharge option, retroverted/cervicitis, cancer/cancer, transparent IUD trainer, post-menopause/herpes, fibroids/polyp, early pregnancy), five detachable ovaries (normal, polycystic, small cyst, large adnexal mass), bladder insert, pelvic organ prolapse insert, baby powder, Injury Shades Makeup Wheel, Primary Colors Makeup Wheel blood mix, hydroxyethyl cellulose thickener, syringe, lubricant, instruction manual, and hard carry case.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Straight Joint
Venturimeter Orificemeter Calibration Set Up
DESCRIPTION:-
The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contain a Venturimeter, second contains an Orifice. The pressure tapings from the Venturimeter and Orificemeter are taken to differential manometer to measure pressure difference. The Venturimeter and Orificemeter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present Set-up is self contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different floe rate. Flow rate of water is measured with the help of measured with the help of measuring tank and stop watch.EXPERIMENTS:-
Ø To determine the Co-efficient of discharged through Venturimeter and Orificemeter Ø To measure discharge through Venturimeter and Orificemeter as flow meters.UTILITIES: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATIONS: –
Ø Venturimeter : Material Clear Acrylic, Compatible to 1” Dia pipe Ø Orificemeter : Material Clear Acrylic, Compatible to 1” Dia. Pipe Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank, Capacity 25 Ltrs. Ø Sump Tank : Capacity 50 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel Ø The whole Set-up is well designed and arranged in a good quality painted Structure
White Board Optics Set
Description
An economical and comprehensive set of equipment for ray optics and color experiments using magnetic-backed components that can be used on the whiteboard (included) or any installed steel (magnetic) board. Included a double ended light box contains a 12 V / 20 W halogen lamp, a wall-mount AC adapter, one end carries a cylindrical lens and slots for mounting the three slit diaphragms for ray optics. The other end carries two adjustable mirrors and an open area for color mixing work using colored filters that fit into slots in the ray box, Seven transparent color filters, seven opaque color filters, Three slits, one rectangular acrylic block, one semicircular block, one right angle 90° x 45° x 45°, One right angle 90° x 60° x 30°, one equilateral prism, four plastic coated ring magnets, one double convex block, One mirror strip, one double concave lens, two magic alphabet card and one mirror holder With instruction manual. The sizes of whiteboard supplied are approx. 580 x 390 mm.
Rocks And Volcanoes
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Measuring Cylinder (Round Base)
We are a credible Exporter and Supplier of Measuring Cylinder (Round Base).
Measuring Cylinder is laboratory equipment used to measure the volume of a liquid.
It is more accurate and precise than laboratory flasks and beakers.
Sometimes, Measuring Cylinder is also used to indirectly measure the volume of a solid by measuring the displacement of a liquid.
Available in high grade polypropylene or polymethylpentene material, our Measuring Cylinder comes with molded graduations in variegated divisions and capacities.
They are transparent and possess optimum resistant against chemical.
They have a round base and pouring spout.
We make available Measuring Cylinder as per the requirement at the best market prices.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Cylinder 10 ml | 24 | |
| Measuring Cylinder 25 ml | 12 | |
| Measuring Cylinder 50 ml | 12 | |
| Measuring Cylinder 100 ml | 12 | |
| Measuring Cylinder 250 ml | 6 | |
| Measuring Cylinder 500 ml | 4 | |
| Measuring Cylinder 1000 ml | 3 | |
| Measuring Cylinder 2000 ml | 2 |
Specimen Jar
We have come up with a quality range of Specimen Jars.
These transparent Specimen Jars are used for preserving different specimens in the lab and are provided with a cap that fits in tight.
These jars provided excellent protection to the species preserved in it.
Material : Polystyrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Specimen Jar (Gas Jar) | 12 |
Pinned Joint Model
SPECIFICATION:
Model consists of hinged. Model will be able to demonstrate the qualitative behavior of the truss under load. As are very flexible, a compression members will easily it`s bucking i.e. It will curve of plain. The tension member however remains straight and tight. The student will therefore have a visual picture of the type of stresses i.e. Compressive or tensile that member of truss will carry under various positive of the load. In case of pinned joint truss, the student will be able to observe that angle between members at each joint undergo a small change.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Smart LED Lighting module
Zigbee offers Green and Global Advanced Wireless Technology, Connecting the widest range of Devices to work together intelligently and help you to control your real world. CC2530 is the first System On chip, which has integrated 8051Microcontroller with ZigBee RF transceiver. A WSN based Smart LED lighting module has been developed with latest LED controller from MICREL, 10 LEDs, ZigBee RF module using CC2531 for Wireless Control with onboard Light Sensor. WSN based LED lighting module has a Base Board and a Zigbee RF module. Zigbee RF module can be plugged into the connector provided on the Base Board, meant for further upgradation.
Features
• 10 Nos. of LED of 2watt each • 400 milliwatts LED • Constant current driver for LED control • Connectors for plug-in Zigbee RF module • Remote ON/OFF control by Zigbee RF Control • On board light intensity sensor • LED Brightness control either by program or by Light Sensor input.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Photo Gates & Leads
These pair of photo gates is housed in tough moulded cases giving them excellent durability.
The lamps operate on 6 Volts with a special built in circuitry which prevents lamps from damage in case higher voltage is applied accidently.
The photo gates can be connected by 4 mm. sockets to a timer and power supplies.
Sine / Square Oscillator 1 Hz – 1MHz
Wave Shapes : Sine and Square waves output 4 mm sockets.
Frequency Range : 1 Hz to 1 MHz using fine and coarse controls.
Accuracy : ± 5% on all ranges.
Amplitude for sine wave output : 30 Vpp.
Amplitude for Square wave output : 15 Vpp
Output Impedance for sine wave : Approx. 600 Ohms.
Output Impedance for square wave : Approx. 400 Ohms
Power Steering Trainer System Actual Working
Power Steering Trainer System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Insect Display Showcase
Description
For display of insects in corridors, laboratory etc. MDF frame with MDf sheet bottom and glass top is nicely polished. Bottom lined with 8mm thick EVA sheet. Raised wall with holes for insecticide bottom to make box airtight & pest-proof. Fitted with clips, lool, handle, hanging hooks on ends and fluorescent tube inside. Size 90x60x11cm.
Stefan Boltzmans Apparatus
The Stefan Boltzmann constant is an important constant in heat transfer. The apparatus determines Stefan Boltzmann constant. The apparatus consists of a hemisphere surrounded by hot water. Hot water is obtained from a water-heating tank. When the blackened disc is inserted at the center of hemisphere, heat is transferred into the disc from hemisphere by radiation and its temperature begins to rise, and from temperature raise rate. (It is measured at the intervals of 5 sec.) Stefan Boltzmann constant is determined.
