XTEMOS ELEMENT
AJAX PRODUCTS TABS
Heart With Artery Blockage Models
Precision Rotary Microtome
Description
A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron. Prominent features include independent feed mechanism with automatic safety device, universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen and full swing protective cover for easy cleaning and lubrication. The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques. The microtome razor is fabricated from fine grain steel alloy tested for microstructure and is heat treated to maintain its sharpness and strength. Supplied complete with one razor 120 mm with back and handle, a set of three object holders, one honing plate, oil can, dust cover, in wooden cabinet.Automatic Gear Box Actual Cut Section
Automatic Gear Box – Actual Cut Section
The working of automatic gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of automatic gear box are shown in actual working form. This model helps the student to understand the working of the automatic gear box very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE

Seven Segment LED Display Circuit
A common anode seven segment module is fitted on a board with 8 bit dip switch to control the each segment of seven segment LED display. The inputs A-D of a display driver are connected to the binary coded decimal (BCD) outputs from a decade counter. A network of logic gates inside the display driver makes its outputs a-g become high or low as appropriate to light the required segments a-g of a seven segment display. A resistor is required in series with each segment to protect the LEDs
Optical Disc
Description
A 500 mm diameter disc marked every 5° is mounted on a heavy stand and is rotatable around its centre. It can be held in any desired position. The lamp house, with a 12V 24 W special filament lamp has rotatable slots to provide light beams of varying widths and also narrow single, double and triple beams. Attached to the lamp house is an adjustable lens carrier with lens to provide diverging, parallel or converging light beams which are clearly visible in classroom. The lamp house can be held in any desired position around the disc. Optical elements are two 50 x 25 mm plane glass mirrors, and a metallic cylindrical mirror, each mounted in a holder, for reflection. For refraction, 20 mm thick acrylic semi-circular block, bi-convex lens, bi-concave lens each 140 mm long and a trapezium with 125 mm base are provided. Each of these elements has embedded magnets to hold on to the disc.Rain Gauge
Description
Rain gauge is designed to measure the precipitation. This small Version consisting of upper and lower housing part, measuring cylinder; Housing made of stainless steel, orifice rim made of brass. Type 7019.0000 can be supplied with a receiving area of 100 cm2. (This type is not conforming to meteorological standards). • Receiving area : 100 cm². • Rain measure (graduated glass) : 250 cm³. • Measuring range : 0 t0 25 mm precipitation (relative to a receiving area of 100 cm²). • Graduation : 1/1 mm precipitation. • Dimensions : dia 115 mm; height 300 mm. • Weight : approx. 0.8 kg.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Flower & Embryology
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Typical flower showing parts Fertilization showing germination of pollen T.S Anther & its development Germination of pollen grain and development of male Gametophyte Megasporogensis Development of embryo and endosperms Development of embryo in sagittaria Embryo in Capasella Microsporangium Types of emchryo sacs Forms of Androecium Form of Gynaecium Development of Monocot embryo Placentation Aestivation L.H. Datura Inflorescene Part – I showing simple racemose & simple cymose Inflorescene Part – II showing compound & special Pollination different types Forms of ovules Forms of Calx & corollaResistance Coils
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION

Automatic Level
Description
a) Manufactured meticulously using International Standard. b) Tightly sealed construction for use in any weather. c) Fast accurate two-speed focusing. d) Friction-braked rotation and endless horizontal drive. e) Optical sight for quick pointing. f) Metal circular bubble. g) Fit all tripod with G5/8" or M16 screw.Optional accessories :
Metal or wooden tripod, metal or wooden staff range pole, measuring rope, plumb etc
Policemen Stirring Rods
We are a chief Exporter & Trader of Policemen Stirring Rods.
The Policemen Stirring Rods are a multipurpose apparatus, which work as a stirrer as well spatula.
The fattened ends of this rod form two small spatulas.
Avail the Policemen Stirring Rods from us at reasonable market prices.
Material : Polypropylene
Particulars | Pack (Pcs) | |
---|---|---|
Policemen Stirring Rod Ø-6 mm x h-245 mm | 12 |
Matt White Screen
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Metabolic Cage for Rat
Description
Animal waste is directed through a collection funnel and onto a linear diffuser guide. The diffuser guide allows solid matter to travel down the top ridges of a 50% incline, passing over a urine port, and into a fecal collection vessel. Liquid waste flows along grooves down the inclined diffuser guide, passing through the urine port, and into a urine collection vessel. A urine deflector prevents excess urine from splashing and contaminating fecal specimen. Separate urine and feces samples are collected in two separate tubes.Features
Reliable experiment results due to better separation efficiency Food hopper design reducing the access or stay of animal inside food hopper Practicality of use due to less components or partsMinimal animal stress: | Sample removing is without stressing animal, access to all elements below the cage floor without disturbing animal |
Durability: | Most components are made from autoclavable polycarbonate and S.S. 304 material |
Versatility: | Unit accommodates various species with simple feeder and floor change Space saving |
Economy: Few parts, simple and rapid assembling |
Components Included
Polycarbonate cage with lid
Polycarbonate collection funnel
S.S. 304 floor grill for Mice and Rat
Polycarbonate Linear diffuser guide
Urine collection tube P.P.
Feces collection tube P.P.
Polycarbonate water bottle 250ml with holder
Waste water collection tube P.P.
Pyrometer
Description
Fitted on a wooden base cast metal uprights and rod mountings. A 20-0-20 scale is provided to notice the expansion in rods. The counter weighted needle is used for easy reading. A knurling screw is provided for zero adjustment. Supplied with three metal rods one of each Aluminium, Brass and Steel.Ball & Ring seperate
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT