XTEMOS ELEMENT
AJAX PRODUCTS TABS
Longitudinal Wave Demonstration
TI MSP430 Development Board
ON Chip Features
• CPU - MSP430F1611 • Core - 16 bit RISC Architecture. • Speed - Up to 8 MHZ. • Flash - 48 KB + 256B. • SRAM (on-chip) - 10KB. • 48 GPIO Lines. Two UARTs. • One I2C Module. One SPI Module. • Two 16 bit Timers. • Five Power Saving Mode. • 12 bit ADC with single channel. • 12 bit DAC with two channel.ON Board Features
• Eight Digital Output - LED Interface. • Two Digital Input. • 16 x 2 Character LCD Interface. • 7 Segment Display via I2C Interface. • 10 Base T Ethernet Connectivity. • SD Card Interface Support. • Audio Interface. • Jtag connector is provided for Debugger. • USB to serial interface provided.
Thermocouple, Single
Stacking Counters
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Humidifier
Description
Humidifier based on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation. To work on 220/230 volts A.C. supply
Sieve Shaker (Gyratory Motion)
Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan.
This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch).
Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil.
Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized.
This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.
| Product: | Gyratory Sieve Shaker | |
| Capacity: | 7 sieves of 150mm, 6 sieves of 300mm | |
| Design: | Table Top | |
| Construction: | Cast Iron, Painted Mild steel | |
| Motor: | ¼ HP | |
| Timer: | 0 - 60 Minutes | |
| Timer Type: | Digital / Analog | |
| Power Supply: | 220 Volts |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Needle Stand Magnetic
MCT Box
MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable.
One size can hold 64 MCTs of 1.5 ml. & the other can hold 100 MXT's of 0.5 ml.
These MCT Boxes are designed to work at temperatures ranging from -190'C to + 121" C.
The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
| Particulars | Pack (Pcs) | |
|---|---|---|
| MCT Box (Rack for 100 MCTs of 0.5 ml) | 4 | |
| MCT Box (Rack for 64 MCTs of 1.5 ml) | 4 |
Post Office Box, Plug Type
Mollusca
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
SPIRIT LAMP
Balance Spring
Lymphatic System
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Flexible AC Transmission Systems
Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.
It consists of
• Generator Set-up (3Φ AC Source) • Simulated Transmission line • IGBT Based VSI Power Module • Series & Shunt Transformers with LC filter • RLC - Load setup • TMS320F2812 DSP Controller • Upgrade possibleGenerator Set-up (3Φ AC Source)
• 3 phase Alternator DC Motor Drive setup 3Φ / 1KVA / 1500 RPM / Salient Pole type coupled with 2HP/220V DC shunt motor and with suitable drive from 1Φ AC input supply with • suitable speed control, sensor and digital speed indicator. • Digital controller with IGBT based DC voltage controller for DC motor Armature Voltage variation 0-200V DC/10A & Alternator field voltage variation with necessary instruments • /meters/indicators.
Vernier Transit Theodolite
Bending Moment & Shear Force Apparatus
INTRODUCTION:
Shear Forces occurs when two parallel forces act out of alignment with each other. For example, in a large boiler made from sections of sheet metal plate riveted together, there is an equal and opposite force exerted on the rivets, owing to the expansion and contraction of the plates. Bending Moments are rotational forces within the beam that cause bending. At any point within a beam, the Bending Moment is the sum of: each external force multiplied by the distance that is perpendicular to the direction of the force.EXPERIMENT MANUAL:
1. To verify the Shear force a cross-section of the beam. 2. To verify the bending moment in cross–section of beam with a flexure condition.APPARTUS SPECIFICATION:
1. Dimensions : 158 cm X 45cm X (h)60cm 2. Total Beam Length : 160 cm with flexure 3. Width of Beam : 5 cm 4. Distance of Length in between : 5 cm 5. Height of beam : 36 mm 6. No. of Hanger for weights : 3 7. No. of Spring Balance : 2 (of 10kg) 8. Total Weight of Apparatus : 13.1 kgACCESSORY REQUIRES:
1. Shear force apparatus 2. Bending Moment Apparatus 3. Hangers 4. Weights 5. Two Spring balances – 10kgs
Human Eye, 3 Times Enlarged
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Vacuum Laboratory Desiccator
We provide impressive range of Vacuum Laboratory Desiccator.
Made of Polypropylene and Polycarbonate, these autoclavable vacuum desiccators can hold Vacuum upto 740 mm of Hg for 24 hrs.
The top dome, molded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside.
The Knurled knob on the top provides easy handling of the dome.
The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-ring.
The Polypropylene stopcock is fitted with a self lubricating PTFE plug.
This plug work three way i.e. Vacuum creation, shutting off & vacuum releasing.
Material : Polypropylene / Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Desiccator (Vaccum) PP/PC 150 mm | 1 | |
| Desiccator (Vaccum) PP/PC 200 mm | 1 | |
| Desiccator (Vaccum) PP/PC 250 mm | 1 | |
| Desiccator (Vaccum) PP/PC 300 mm | 1 | |
| Desiccator (Vaccum) (All Clear) PC/PC 150 mm | 1 | |
| Desiccator (Vaccum) (All Clear) PC/PC 200 mm | 1 | |
| Desiccator (Vaccum) (All Clear) PC/PC 250 mm | 1 | |
| Desiccator (Vaccum) (All Clear) PC/PC 300 mm | 1 |
Advanced Stereo Zoom Microscope
Specifications
Advanced Stereo Zoom Microscopes provides reliable mechanical components and best quality optics. This exceptional quality instrument helps the users to perform certain tasks efficiently and maintaining high productivity. The wide variety illuminators and stands are provided with the instrument to suit the requirement of different applications. These microscopic instruments provides the zoom magnification from 8X to 50X. The Zoom ratio 6.3:1 with standard eyepiece Wide Fiels 10X/22. The images are clear, sharp, flat and high-resolution contrast even at the edge of field. This exceptional quality instrument helps the users to perform certain tasks efficiently and maintaining high productivity.
The images are clear, sharp, flat and high-resolution contrast even at the edge of field. It is the best instrument which best suited for biological research as well as in industrial laboratories where large field coverage, maximum working distance and high precision is required. The Binocular Body of the device is inclined at 45o for fatigue free viewing that can be rotated complete 360o and that can be locked in any position. The Instrument has Ergonomically design bilateral ocular tubes that can be interlocked for enhanced operations. The instrument is equipped with incident lights that are build in the stand. The lamps can be switched on either separately or together with the LED.
