XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Dissecting Scissors Straight

Stainless Steel, very fine points for delicate work, closed shanks, overall length 125mm.

MCS Family Microcontroller Trainer

Specification

• 89C51 Microcontroller operating at 12Mhz • 64KB on-chip internal Flash EEPROM program memory • 1KB on-chip data RAM • 64KB External Data RAM • 32KB EPROM for monitor program • 32KB RAM for Program/Data memory • 32KB RAM for data memory • 1KB On-Chip Data RAM • Battery backup for RAM • Onboard 16 x 2 Alphanumeric LCD Interface • Onboard IBM PC Keyboard Interface • RS232/RS485 compatible serial interface terminated at 9 pin 'D' male connector • One RS232 Cable • Onchip Programmable Counter Array (PCA) PCA Contains five 16 bit PWM/capture/compare output • 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors • All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus) for connecting the • VBMB series of Experiment boards. • All connections of the Microcontroller are terminated in a separate connector for expansion • Built-in Line assembler & Disassembler • Windows based In System Programming Software for Flash Memory programming

Airway Intubation Model

Description

The Difficult Airway Management Simulator offers a realistic airway management training with 24 various difficulty levels including 3 different mouth openings, 2 neck flexibility options, 2 positions for the vocal codes and an inflatable tongue.

Training Skills:

Airway opening techniques (head tilt, jaw thrust) Bag-Valve-Mask ventilation Pre intubation airway assessment "Sniffing position" Pressurization of external larynx to improve the laryngeal view Intraoral/intranasal intubation Use of oropharyngeal airway (OPA) Use of nasopharyngeal airway (NPA) Use of laryngeal mask airway Use of video laryngeal scope Use of tracheal intubation scope Confirmation of successful ventilation by thoracic and abdominal movement Feedbacks on incorrect procedures including esophagus intubation and unilateral intubation Securing the tube in place with tapes or Thomas endotracheal tube holder

Training Model Includes:

1 manikin 3 upper incisions 1 lubricant 1 50ml syringe Size: 27.6 x 15.4 x 9.9 in

Recommended Equipment:

Macintosh laryngoscope: blade size 3, 4 Tracheal tube: internal diameter 7.0-7.5mm Laryngeal mask Air-Q: size 3.5 LMA supreme: size 4 I-gel: size 4

Spherometer

Description

Brass dial head 40 mm diameter, divided and marked in 100 divisions, vertical scale 10-0-10 mm, fitted on tripod stand, distance between legs 40 mm.

Sizrs are mentioned below:-
Screw pitch 1 mm Screw pitch 0.5 mm

XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Table Clamping Device

Description

To fix the microtome to the table

Draining Rack

Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate of this Draining Rack has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack not rot, stain or rust. Material : Acrylopitrile Butadiene Styrene / Polycarbonate
ParticularsPack (Pcs) 
Draining Rack1 

Bicycle Dynamo Assembly

Description

A cycle dynamo with crank handle, is fitted on base with two output terminals which are connected in parallel to a lamp holder with a lamp.

Breeding Nest

Description

Teakwood frame finished in spirit polish. 4mm thick glass on top and fine wire mesh on three sides. Front with 13cm, rounded opening in the centre with black cloth sleeve. On right side a plumbic pipe fitted for collection of files. Size 45x45x45cm 
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Westminister Electromagnetic Kit

Description

A very effective and motivating learning aid in elementary electromagnetism. Consists of 8 anisotropic alloy magnets, 8 ceramic ferrite magnets, 4 steel magnet yokes, 6 plotting compasses, 4 hardboard formers to take compasses, 1 bottle iron filings 250 gm, 4 dispensers for iron filings , 4 double C-cores, 4 clips for C cores, 4 Aluminium rings, 4 Aluminium split rings, 4 armatures with axle tubes, 4 Aluminium axle rods, 8 split pins, 16 rivets, 4 formers for coils, 4 reels cello tape, 4 reels copper wire, 4 sheets white pasteboard, 4 plain postcards, 4 reels white cotton thread, 1 length latex rubber tubing, 4 each resistors 100 ohms and 10 ohms, 4 support bases, 10 MES bulbs, 8 MES bulb holders,1 wood clamp and 1 wooden block. With instructions.

SILICA BASIN (Round Bottom) with spout

PRODUCT DESCRIPTION Round Bottom Basin With Spout is high purity material that enables products to resist corrosion and withstand the sharp change in temperature. Both of them meet requirements acquired by chemical and physical analysis and have 200ml Capacity. Available in Different Dimensions:  20ml,  Dia. 55mm x Ht. 23mm 45ml,  Dia. 75mm x Ht. 27mm 70ml,  Dia. 87mm x Ht. 33mm 85ml,  Dia. 94mm x Ht. 36mm 100ml, Dia. 100mm x Ht. 45mm 200ml, Dia. 113mm x Ht. 47mm

Pilot Static Tube Set Up

DESCRIPTION:-

A Pitot tube is used to measure the local velocity at a given point in the flow stress. A Pitot tube of standard design made of copper / SS is supplied and is fixed below Vernier scale. The Vernier scale is capable to measure the position of Pitot tube in transparent pipe section. The pipe has a flow control valve to regulate the flow. A U-tube manometer is provided to determine the velocity head. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTS:-

Ø To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot tube Ø To plot velocity profile across the cross section of pipe

UTILITIES: –

Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kW

TECHNICAL SPECIFICATION: –

Ø Pitot Tube : Material Copper/SS of compatible size fitted with Vernier Scale Ø Test Section : Material Clear Acrylic, Compatible to 1” Dia. Pipe Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank, Capacity 40 Ltrs. Ø Sump Tank : Capacity 70 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted Structure
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Blood Collection Vials (VACUTAINER) Plain/EDTA

Blood collection and storage is done is special tubes which allow the preservation of the blood sample over long periods. These tubes can be made of glass or plastic and the caps of these vials are coloured to indicate the additives in them. Some of the additives are anticoagulants such as EDTA, sodium citrate or heparin. Other substances include preservatives. The containers containing coagulants are capped with gold, red or orange caps. The ones containing anti-coagulants are green, which contain heparin, purple or lavender indicates ones which contain EDTA, grey capped tubes contain sodium fluoride or oxalate. Blood collection tubes (also called as vacutainers) are extensively used in hospitals, medical centres and diagnostic centres. In biological labs, it is used in experiments like haemolysis etc. Non Vacuum Vials (Pk of 100) Vacuum Vials (Pk of 100)

Hydraulic Drum Brake Actual Working Two Drum

Suitably sectionised full size unit. Consisting of original parts such as :- master cylinder assembly, Disc, caliper, hydraulically operated piston assembly and necessary connections. Completed with operating lever and mounted on heavy iron stand.

Optical Bench, Junior

Description

On wooden base, with 1.5 meter scale, with six sliding bases. Each siding base is with an index mark, a brass pillar and locking screw, with following accessories: 1. One lamp house with 230 V lamp.
2. One object screen, metal, white.
3. One lens holder for 38 mm diameter Lenses. 4. One receiving screen, metal, white, with slot for squared paper on reverse. 5. One object needle, mounted in brass rod.
6. One plane mirror in metal frame. Each of these accessories is mounted on a 6 mm brass rod which fits into the pillars and is adjustable for height.

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Wooden Levelling Staff Telescopic type

Description

We bring forth an impeccable array of Wooden Leveling Staff to eminent customers. Products that we come up are ideally used to cater to the various needs and preferences of customers of various construction industry along with others. Therefore, this range is quality tested as per industry laid parameterst.

Multi Stage Centrifugal Pump Test Setup

DESCRIPTION:

The Set-up is designed to study the performance of Multi Stage Centrifugal Pump. The Set-up consists of a Multi Stage Centrifugal Pump coupled with DC motor & drive, supply tank, measuring tank & pipe fittings for closed loop water circulation. There are 2 separate pumps connected to DC Motor and drive and can be connected in series and parallel to stimulate different combinations. Pressure and Vacuum Gauge are connected on delivery and suction side of each pump for the purpose of measurement. Swinging Field Dynamometer arrangement for direct torque measurement using dial type spring balance is made for individual pump. The flow rate of water is measured using measuring tank and stop watch provided.

EXPERIMENTS:

1.Speed Vs Discharge 2.Head Vs Discharge at various speeds 3.Efficiency curves at various speed and heads

FEATURES:

1.Closed loop water circulation 2.Compact & stand alone set-up 3.MS Excel sample calculation program on demand 4.Stainless Steel tanks and wetted parts 5.Superb painted structure 6.Simple to Operate & Maintain

UTILITIES REQUIRED:

1.Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC), 5 A, three pin socket with switch for pump. 2.Water Supply: Tap water connection ½” BSP. Distilled water @ 80 Ltrs. (Optional extra cost)

TECHNICAL SPECIFICATIONS:

1.Pump (2 Nos.) : Kirloskar, Capacity 1 HP Speed 2800 RPM (max.) Head 12 m (max.) 2.Drive : DC Drive along with non-contact type Digital RPM Indicator 3.Supply Tank : Capacity 150 Ltrs. 4.Measuring Tank : Capacity 100 Ltrs. fitted with Piezometer Tube & Scale 5.Piping : GI / PVC 6.Stop Watch : Electronic 7.Control Panel : With required electrical instrumentation The whole Set-up is well designed and arranged in a good quality painted structure.

Scintillation Vial

We provide an impressive range of Scintillation Vial to our clients. These unbreakable vials, molded in Polyethylene, are fitted with leak proof screw caps. These Scintillation Vial can be used with standard counting equipment for liquid scintillation system. Fabricated from high grade components, Scintillation Vial is excellent for low activity count. Material : High Density Polyethylene
ParticularsPack (Pcs) 
Scintillation Vail 8 ml100 
Scintillation Vail 20 ml100 
Rack For 90 Vails of 8 ml Scintillation Vail2 
Rack For 50 Vails of 20 ml Scintillation Vail2 

Sets of metal discs

Description

For demonstrating that some metals are magnetic whilst others are not and for general ‘Metal Identification’ exercises. Comprises sixteen discs, 25 mm. diameter 2 each of Mild Steel, Stainless Steel, Brass, Zinc, Nickel, Silver, Bronze, Aluminium and copper. One of each is stamped with the name of metal. the other is unmarked.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture