XTEMOS ELEMENT
AJAX PRODUCTS TABS
Motor With Solar Cell
Tuning Forks
Test Tube BG
Pilot Static Tube Set Up
DESCRIPTION:-
A Pitot tube is used to measure the local velocity at a given point in the flow stress. A Pitot tube of standard design made of copper / SS is supplied and is fixed below Vernier scale. The Vernier scale is capable to measure the position of Pitot tube in transparent pipe section. The pipe has a flow control valve to regulate the flow. A U-tube manometer is provided to determine the velocity head. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.EXPERIMENTS:-
Ø To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot tube Ø To plot velocity profile across the cross section of pipeUTILITIES: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATION: –
Ø Pitot Tube : Material Copper/SS of compatible size fitted with Vernier Scale Ø Test Section : Material Clear Acrylic, Compatible to 1” Dia. Pipe Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank, Capacity 40 Ltrs. Ø Sump Tank : Capacity 70 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted StructureXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Dicot & Monocot Leaves
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Digital Coductivity Meter
| Usage | Industrial, Laboratory | |
| Material | MS | |
| Color | White |
Features
Highly Stable and Accurate Cell Constant Adjustment Facility Available in Lab & Field models Temperature Coefficient Correction facility| Display | 3 1/2 Digit LED | 3 1/2 Digit LCD |
|---|---|---|
| Range | 5 Ranges 0 - 1000 Mohs/cm | 2 Ranges 2 & Mohs/cm |
| Temperature Compensation | Manual 0-50oC | - |
| Cell Constrant Adjustment | Adjustable | Pre Adjustable |
| Conductivity Cell | Platinum DIP | Platinum DIP |
| Measuring Frequency | 1000 Hz | 1000 Hz |
| Accuracy | 1% FSI | 1% FSI |
| Power | 230v 10% | 1 x 9V Battery |
| Dimensions | 76 x 275 x 175 mm | 85 x 28 x 165 mm |
| Weight | 2 kg. (Approx.) | 0.8 kg. (Approx.) |
| Accessories | Conductivity Cell, Operation Manual, Dust Cover. | |
Model of Dentition development
Advanced Nursing Baby
Description
This Advanced Nursing Baby Manikin is specifically designed for professional nursing training. This high quality manikin will provide wide range of exercises possible including both first aid and emergency situations.BASIC NURSING SKILL:-
Movable head, neck, hand and foot Cephalic vein puncture Umbilic vein injection Oronasal intubation nursing Stomach washing, clyster and catheter nursing Ostomy Hand-foot subcutaneous injection Washing, lactation, dressingXTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Ohm’s Meter
Tooth Hygiene Set
Heart Models
Our capability and industrial know how has enabled us to manufacture, supply and export Heart Models.
Made of superior quality raw materials that are supposed to be the best in the market, these products have a descriptive structure and construction.
With clear depiction of external features and internal structures of the heart, these provide an appropriate indication of various large blood vessels.
These products help in education medical students about the clearer conception of the routes of the systemic and pulmonary circulation in the heart.
Heart Models are packed in special packaging material so as to ensure its safe and secure transit.
Constant Volume Air Thermometer
Description
A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod. An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions. With U-shaped base. Complete with 1 meter rubber tubing to connect reservoir to the bulb. Supplied without mercury.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Volumetric Flask
We introduce our special quality Volumetric Flasks.
These Volumetric Flasks are blown in Polypropylene and are strong, unbreakable and have good contact clarity.
These autoclavable Volumetric Flasks are provided with screw caps to prevent leakage.
These Volumetric Flasks are economic as well.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Volumetric Flask 25 ml | 6 | |
| Volumetric Flask 50 ml | 6 | |
| Volumetric Flask 100 ml | 6 | |
| Volumetric Flask 250 ml | 3 | |
| Volumetric Flask 500 ml | 3 | |
| Volumetric Flask 1000 ml | 2 |
Rear Axial Assembly With Differential Gear
Rear Axial Assembly With Differential Gear Fully Floating Type – Actual Cut Section
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Process Control Simulator
The process control simulator is a special purpose analog simulator with operational amplifiers The simulator permits a detailed analysis of the first order, second order and third order systems and the application of proportional, integral and derivative control to the improvement of their performance. The simulator may be used at high speed for oscilloscope observation or at a low speed for meter observation.
FEATURES:
• Built-in Function Generator (Sine & Square wave). • Self contained power supplies and power ON/OFF switch. • Simulated distance-velocity lag. • Full mimic diagrams in the front panel. • The simulated process - Simple Lag of 1ms/10ms, 2 lags of time constant 1ms/10ms that can be toggled to integrators of same time constant - Distance-velocity lag & delay 10ms • The simulated PID controller - Integral action control scaled in integral action time. - Derivative action control scaled in derivative action time. - Proportional band control scaled in % proportional band.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Water Cooler Trainer
The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell. The stainless steel water tank is provided with insulation on air Sides and a door are provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a bail-operated top. Various measurements provided enable students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.
SPECIFICATIONS:
Cooling Cycle a) Compressor Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-12 refrigerant. b) Finned tube type air colled condenser with forced air flow. c) Filter cum drier for refrigerant. d) Capacity expansion device. e) Evaporator coil embraced on stainless steel water tank, Provided with glass wool Insulation. 2.Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top. 3.Measurement a) Pressure gauges for evaporating and condensing pressure. b) Thermometers to measure refrigerant temperatures at inlet and out let of condenser and evaporator. c) Dial type thermometer for water temperature. d) Rotameter to measure liquid refrigerant flow. e) Energymeter to measure compressor Input. 4.Safely & Controls – a) Thermostat to put off compressor at set water temperature. b) Pressostat to put off compressor if high or low pressure Goes out of set limit. c) Over load protector for compressor, A technical manual will be supplied along – with the unit. Also, the unit is provided with an attractive and anti corrosion powder costing.SERVICES REQUIRED:
1.Floor space of 1.5 m. X 1.5 m. 2.Water supply of 5 lit/min, 3.230 V, 15A AC stabilized supply with earthing connection
Water Still with Metal Heater
Specifications
Water stills are carefully designed to produce high purity pyrogen free distilled water. The water still made from 3.3 exp. borosilicate glass comprises of horizontal type boiler, condenser, constant level device, silica sheathed heater, along with stand and clamps.Features
Borosilicate condenser and boiler are with a removable silica sheathed heater and screw threaded connectors for ease of Cleaning. Distillate temperature is approx. between 25° to 45°C which is ensured by an efficient condenser. The stand is powder coated for rust free operation and lustrous appearance. The unit automatically switches off if water level in the boiler falls below heater. Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy. Drain nozzle/Teflon Stop Cork is provided for easy cleaning and maintenance. Electrical Power: 220/240 V, 50/60Hz, Single Phase Supply.
400W Smart Grid Experimental Setup
This consists of 2 Microgrid, one 400W& 200W of power generation connected to a main Power Grid with all the components needed to convert a traditional Grid to a Smart so that many experiments can be conducted on this “Smart Grid”. 3Φ, 1KW isolation transformer with power input from utility grid will act as main grid to which 2 Microgrid will be connected through synchronizing panel. Optionally a commercial 1KVA Grid Connected Solar Power Inverter can be added to this experimental setup. By adding 1KVA commercial solar inverter, when the experimental setup is not used by student, it could be used to generate power.
This Advanced Smart Grid Experimental Setup Consists of
• 2 Micro Grids, 400W& 200Wof Power Generation using Solar, Wind or Hybrid • An Isolation Transformer coupled to the utility grid, acts as main grid to this Setup • Commercial 1KVA Grid Connected Inverter with Solar Panel (Optional) • Optional Components for the 400W Smart Grid Setup • DSP/FPGA Controller for PE, SG, PS Applications • IoT Based Data Acquisition • Other Add onsMicro Grid - I (Solar/Wind Grid Connected 1Φ, 400W Smart Micro Grid)
• Main Frame • 200W Solar PV Module with Stand • 200W Wind Turbine with Tower (Optional) • 30W Wind Turbine with Blower setup • 200W DC-DC Boost Converter for Solar • 200W DC-DC Boost Converter for Wind • 400W Hybrid DC-DC Buck-Boost Converter • Battery Bank • 400W Inverters • Bi-Directional Buck-Boost Converter for Battery Charging • DSP/FPGA Controller • Microcontroller based Protection Relays • Smart Energy Meter • Synchronizing Panel • Single Phase R Load & Lamp Load (200W) + (200W) • PLC with SCADA Software • 8 Channel, PC based Power Quality Analyzer (Optional)
Force Table
To verify the law of composition and resolution of forces consisting of a aluminium table 40cm in dia.
its raised rim has a engine divided scale, graduated in 360° mounted on heavy vertical support rod & tripod base provided with leveling screws.
Body under study in a ring in center of the table fastened by cords passing over four pulleys attached with the table.
Complete with four pulleys, four weights hangers twelve weights (2x10gm, 2x20gm, 4x50gm, 4x100 gm.)
