XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Burner Bunsen – Semi Micro

Description

Nickel plated burner tube with rotatable air regulator on enamelled die casted base with a tapered riffled gas inlet.
Burner tube dia. 10 mm and height 60 mm.
Base dia. 80 mm
Overall height 95 mm and inlet tube 10 mm dia.

Human Ear, Enlarged, 2 Parts

Description

This Model is Showing clearly all the important parts of human ear, mounted on a board, 4 dissactable Parts complete with key card.

Air Conditioning Trainer Window Type

Window air conditioner is becoming now a day’s necessity. The unit demonstrates the application of window air conditioner & evaluation of its performance. It consists of a small room to which a small air conditioner is connected the room is provided with a transparent front cover with a heater inside to simulate heat load in the room. Various measurements are provided so that performance of system that is COP of system, actual & theoretical cooling capacity of system & power consumption of unit with different load conditions.

SPECIFICATIONS:

1.Compressor – Hermetically sealed, Kirloskar make, having the capacity of 1/10 ton of refrigeration using R-12 refrigerant to keep room temperature between 20 to 30 c. 2.Condenser – Finned tube type, with forced air flow over the tubes, 3.Capillary tube of matched length as expansion device. 4.Evaporator – Finned tube type with forced air flow, 5.Room – 0.6 X 0.7 X 0.7 m. height, provided with transparent front wall. A heater with input control is provided inside the room. Which simulates different load conditions. 6.Measurements and Controls a) H.P. / L.P. Pressure gauges b) Digital temperature indicator to measure the temperatures at various points. c) Energy meters to measure input to compressor & heater. d) High and low pressure cutout. e) Thermostat to put off the compressor at set room temperature. f) Necessary switch for electrical components.

SERVICES REQUIRED:

1.Floor area of 2m X 1 m. 2.230V, 15AC stabilized supply with earthing connection

Comparative Terrain Model

Description

Set of 2 landform models, each includes an overlay representing ancient mountain forms that can be removed and compared with the base model to show changes millions of years later. Cross section shows basic mountain types, volcanic fault block, glaciated domes and folded mountains with lesson plan, size 45 x 60 cm.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Flow Over Weir Or Open Channel Apparatus

Flow Over Weir Or Open Channel Apparatus: A ‘WEIR’ is the name given to concrete or masonry structure built across a river (or stream) in order to raise the level of water on the upstream side and to allow the excess water to flow over its entire length to the downstream side. Weirs may also be used for measuring the rate of flow of water in river or streams. Different shapes of “WEIRS” generally used are sharp-crested weir, broad­casted weir and ogee shaped weir. In the unit a centrifugal pump sucks the water from the sump tank, and discharges it to a small flow channel. The weir is fitted at the end of channel. All the weirs are interchangeable. The water-flowing over the weir falls in the collector. Water coming at from the collector can be directed to the sump or can be directed in to the measuring tank for measurement of flow.

SPECIFICATIONS:

[1] The unit is provided with following weirs: (a) Sharp-crested weir. (b) Broad-crested weir. (c) Ogee shaped weir. [2] Pump 1/2 H.P. monoblock. [3] Flow measurement – Measuring tank calibrated water flow meter is used. A technical manual accompanies the unit.

SERVICES REQUIRED:

[1] Floor surface – 2.5 m x 1.5 m. [2] 230 v, 5 amp supply with earthing connection

Continuously Variable Transmission

Continuously Variable Transmission – Actual Cut Section The working of CVT is shown with the help of actual parts assembled on square iron pipe frame. The CVT is driven through permanent magnet D.C. motor with variable speed control drive. RPM Sensor With Digital Display Is Also Provided. All the necessary parts of CVT are shown in actual working form. This model helps the student to understand the working of the CVT very easily. It is specially made dissectible for demonstration purposes.

Venturimeter Orificemeter Calibration Set Up

DESCRIPTION:-

The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contain a Venturimeter, second contains an Orifice. The pressure tapings from the Venturimeter and Orificemeter are taken to differential manometer to measure pressure difference. The Venturimeter and Orificemeter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present Set-up is self contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different floe rate. Flow rate of water is measured with the help of measured with the help of measuring tank and stop watch.

EXPERIMENTS:-

Ø To determine the Co-efficient of discharged through Venturimeter and Orificemeter Ø To measure discharge through Venturimeter and Orificemeter as flow meters.

UTILITIES: –

Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kW

TECHNICAL SPECIFICATIONS: –

Ø Venturimeter : Material Clear Acrylic, Compatible to 1” Dia pipe Ø Orificemeter : Material Clear Acrylic, Compatible to 1” Dia. Pipe Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank, Capacity 25 Ltrs. Ø Sump Tank : Capacity 50 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel Ø The whole Set-up is well designed and arranged in a good quality painted Structure

Two Input Nor Gate

To study the NOR digital logic gate and verification of the truth table.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Weighing Bottle with Interchangeable Stopper

Squate FormO.D. x Ht. mm (approx.)Capacity ml
40 x 3020
50 x 2515
50 x 3525
50 x 5050
60 x 4040
Tall Form20 x 405
25 x 605
30 x 605
40 x 905

Plant Cell on Board

Description

Enlarged many times, showing the microscopic structure with key card.

Histology Set II

Set of 24 slides consisting of
Adrenal glandAreolar tissue
CereburmColon
Compact bone, LSHeart, entire LS
Human plantar skinHyaline cartilage
Kidney, LSLiver, injected
Lung, LS triple stainLymph node
Olfactory epitheliumOviduct
PenisPeripheral nerve
Pituitary, V.LSSperm Smear
Striated muscle, TSThyroid gland
ToothTrachea
UretervWhite Fibre-Cartilage

Mini Vertical Electrophoresis

Description

Gel Electrophoresis System Vertical Mini with glass plates, combs.Leak proof. Moulded in single piece made of polycarbonate. 99.9% pure platinum wire is used in electrode.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Human Respiratory System

Description

Showing clearly all the important parts, mounted on board, complete with key card.

Pressure Tube, Green

Inner Diameter ±0.5mm Wall Thickness ±0.2mm
6.4 3.2  

Sine / Square Oscillator 1 Hz – 1MHz

Wave Shapes : Sine and Square waves output 4 mm sockets. Frequency Range : 1 Hz to 1 MHz using fine and coarse controls. Accuracy : ± 5% on all ranges. Amplitude for sine wave output : 30 Vpp. Amplitude for Square wave output : 15 Vpp Output Impedance for sine wave : Approx. 600 Ohms. Output Impedance for square wave : Approx. 400 Ohms
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Displacement Vessel or overflow vessel

Metal, size 115mm x90 mm (HxD) with spout for specific gravity experiments. Also available in following two sizes : 100mm x 50mm 225mmx125mm

Stop Clock, Mechanical

Two sweep hands, one indicating seconds, the other recording minutes. Start-stop lever on the left hand side, zero reset lever on right hand side. Movement housed in metal case. Runs for 24 hours on one winding. Diameter of dial 100 mm. divided 0-60 x 1. In white powder coated metal case.

Brush, Bottle

Bristle head, on wire handle with cotton tip head. Straight.

Diameter x Brush Length (mm) Overall Length (mm)
50 X 100200 
65 X 125250 
75 X 150350 
100 X 150600  

Human Tooth, Upper Triple Root In 2 Parts

Description

Upper triple root molar with caries, enlarged 15 times in 2 parts, longitudinal section through crown, 2 roots and pulp cavity, on stand with key card.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture