XTEMOS ELEMENT
AJAX PRODUCTS TABS
Leaf Area Meter
Description
Leaf Area Meter We have been affianced in offering an exclusive collection of Leaf Area Meter which is used to obtain measurements of leaf area without detaching the leaf from the plant. The offered meter is manufactured with the use of high grade components and latest tools in order to meet the set industry standards. These are extensively used for conducting various tests and studies on the leaves of a tree.
Power Steering Trainer System Actual Working
Power Steering Trainer System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Laboratory Spatula
Acquire from us high quality Laboratory Spatula at affordable price range.
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
This is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Spatula 150 mm | 12 | |
| Spatula 200 mm | 12 |
Heat Pipe Apparatus
Heat Pipe Apparatus:
Heat pipe is an interesting device, which is used to transfer heat from one location to another.
The apparatus consists of three pipes, viz. A heat pipe, copper pipe and stainless steel pipe. Ail the pipes have same physical dimensions. Copper and stainless steel pipes serve the purpose of comparison of heat pipe performance. All pipes are mounted vertically with a band heater at lower end and water filled heat sink at upper end. Nearly isothermal operation of heat pipe is clearly visualized from longitudinal temperature distribution of the pipe.
SPECIFICATIONS:
1.Heat pipe – Stainless Steel pipe, 25 mm O.D., 450 mm. Long. Sealed at both ends, evacuated and filled partially with distilled water – one No. 2.Copper and stainless steel pipe of same size as that of heat pipe – one each. 3.Equal capacity heater at bottom end of each pipe. 4.Water filled heat sinks at upper end of each pipe.Measurements and controls
a) Dimmerstat to control heat input to all the heaters – 4 amp. Capacity One No. b) A voltmeter and an ammeter to measure input to heaters One each. c) Multichannel digital temperature indictor to measure temperatures along the length of pipes.Four thermocouples are provided on each pipe. v Thermometers to note down water temperatures in heat sinks – 3 Nos.Services Required:
230 VA.C. Single Phase supply. Floor Area = 1 m X 0.5m X 0.5 m height.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Digital Coating Thickness Meter
Description
Digital Coating Thickness Meter We offer high quality of Digital Coating Thickness Gauge. Statistics (Number of readings, average, Std. deviation, max. ,; min.) are updated with every reading and displayed simultaneously. It helps to decide how many readings are to be taken. Continue taking readings till you start getting reasonably consistent statistics.
Music Tuning Fork Set
Multi Tank System
Panel Features
• Rocker switch is provided to ON/OFF the process plant. • Digital Panel Meter. • Pump Indicator. • Short Circuit protection. • Mimic diagram in the panel. • All the electrical connectors are terminated in the panel.Features
• This equipment consists of four tank system, conical tank system and spherical tank system. • Four numbers of Acrylic tank are provided for doing multivariable control of four tank system. • Conical tank (SS) is provided to performing the nonlinerar control system. • Spherical tank (SS) is provided for controlling the complex system. • Six numbers of level transmitter (DPT) are provided to measures the level of the each tank. • Three numbers of smart control valve with positioner are provided in the inlet of Flow rate. • Hand valve is provided at the bottom of the process tank to study the load disturbance. • Three numbers of hand valve are provided to control the Rotameter flow rate. • Three numbers of centrifugal pump are provided for water circulation. • Two flow transmitters are mounted for conducting flow, cascade and Ratio control. • Appropriate Digital panel meters are provided to measure the transmitter and actuator signals. • Delay coils are provided to the input of the process tanks for transportation lag study. • Storage tank of 100 litre capacity (SS). • Rotameter for Visual indication of the flow rate. • Relay circuit is provided to ON/OFF the solenoid valve. • Built in regulated power supply. • All Water flow lines are connected by (SS) fittings. • Necessary patch chords are provided for interfacing the Electrical signal. • Established successful design that mimics a real industrial process. • Front panel includes mimic diagram of the process, so students can clearly see what they are controlling. • Safe, practical and realistic. • Hand valves are provided to study the coupling (Interaction) and decouplingXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
2 Axis Robotic-MatlabTrainer
This Robo Trainer is working along with Matlab. Two axisrobo consists of two AC Servo Motors which are made to rotate using PWM pulse output of the controller. Two rotational encoders are present to determine shaft position of the motors. One AC Motor is used to rotate the handle from 0 to 360°, and the other is to move the handle up and down which can cover a distance of 450 mm. Pneumatics ARM is used for the application of pick and place of an object.
Specification
• Horizontal Handle Rotation - AC servo Geared motor - 500 rpm - 0 - 300º Rotation • Vertical Handle Rotation - One AC servo Geared motor - 500rpm - 450mm Movement • Pneumatic Gripper - 12mm Bore Diameter - 25mm Stroke Length - Miniature cylinder type - 1kg Pay load
Water Bath Recangular Type
Specifications
It is a double walled unit inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. Concentric rings can be removed to accommodate containers of various sizes. Temperature from ambient to 100°C is controlled by Hydraulic capillary type thermostat with accuracy of ± 1° C . Workable on 220V AC 50Hz Single Phase.| Chamber Size In mms | Holes | Cap. (Aprox.) |
|---|---|---|
| 300x250x100 | 6 holes of 75 mm | 8 L |
| 355x405x100 | 12 Holes of 75mm | 15 L |
Petri Dish
These Petri Dish offered by us is clear, unbreakable, & autoclavable.
The PS Petri Dish with fitting proves excellent for culture exp.
Made in polystyrene, this transparent Petri Dish provides an excellent inside view.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Petri Dish 50 mm | 36 | |
| Petri Dish 75 mm | 36 | |
| Petri Dish 100 mm | 36 | |
| Petri Dish 125 mm | 12 | |
| Petri Dish 150 mm | 12 | |
| Petri Dish (Culture) | 12 |
Action of Cams
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Breeding Nest
Thermocouple, Double
Chrysopa Breeding Nest
Description
Teakwood frame with silk screen net on sides and collapsible cover on side. Cover can be fixed in position with help of lever. Top sliding plank of MDF covered with black cloth from inside and spirit polished from outside. A sapre plank supplied for replacement. Combs for removal of insect from plank. Beautiful spirit polish finish. Size 60x60x30cm
Simple Circuit Modules
Description
Designed to demonstrate to implement and applications of electrical, electronic devices and simple circuits. These modules are fitted with 4 mm sockets. Components are directly mounted on printed PCB with diagram.Various modules are available as following Resistor LDR LED Push Switch Motor Reed Relay Reed Switch Relay Nand Gate Buzzer Thermistor Lamp Holder Single Pole Double Throw Switch Electromagnet Power TransistorXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Digital Meters
Reciprocating Compressor Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Micro Cover Glass
Made from clear optical glass, the cover glasses are uniform in size and free from scratches and striations. Packed in plastic box for easy handling.
Pack of 10 gms
Size
Square Size
18x18mm.
19x19mm.
22x22mm.
Rectangular Size
22x30mm.
22x40mm.
22x50mm.
22x60mm.
24x50mm.
24x60mm.
Circular Size
18mm.
19mm.
22mm.
24mm.
Human Circulatory System
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Wankel Engine Model
The model demonstrates the principle, operation. It is cutaway to show the internal constructional details. Unlike other engines the rotary piston engine avoids reciprocating parts. The power pistons an arch like triangular rotor which on rotating generates an epitrochoid. Mounted on metal base with printed diagrams.
Digital Coductivity Meter
| Usage | Industrial, Laboratory | |
| Material | MS | |
| Color | White |
Features
Highly Stable and Accurate Cell Constant Adjustment Facility Available in Lab & Field models Temperature Coefficient Correction facility| Display | 3 1/2 Digit LED | 3 1/2 Digit LCD |
|---|---|---|
| Range | 5 Ranges 0 - 1000 Mohs/cm | 2 Ranges 2 & Mohs/cm |
| Temperature Compensation | Manual 0-50oC | - |
| Cell Constrant Adjustment | Adjustable | Pre Adjustable |
| Conductivity Cell | Platinum DIP | Platinum DIP |
| Measuring Frequency | 1000 Hz | 1000 Hz |
| Accuracy | 1% FSI | 1% FSI |
| Power | 230v 10% | 1 x 9V Battery |
| Dimensions | 76 x 275 x 175 mm | 85 x 28 x 165 mm |
| Weight | 2 kg. (Approx.) | 0.8 kg. (Approx.) |
| Accessories | Conductivity Cell, Operation Manual, Dust Cover. | |
Turbo Charger Actual Cut Section
The working of turbo charger is shown with the help of actual parts assembled on iron base. All the necessary parts of turbo charger are shown in actual working form. This model helps the student to understand the working of the turbo charger very easily. It is specially made dissectible for demonstration purposes.
