XTEMOS ELEMENT
AJAX PRODUCTS TABS
Test Tube BG
Thin Cylinder Apparatus
A heavy bench top unit for studying the stress and strain in a thin walled cylinder under internal pressure. A thin walled cylinder is mounted between two support blocks. Internal pistons and seals create oil sealing. A handwheel at one end of the apparatus enables the cylinder end conditions to be adjusted to either open or closed. The internal pressure is adjusted by means of a hydraulic hand pump on the apparatus. An analogue pressure gauge displays the internal pressure whilst a pressure transducer gives feedback to the Data Acquisition Interface and Software supplied. Strain gauges are arranged on the external surface of the cylinder to measure the radial and circumferential surface strain. The strain gauges are at various angles.
Blood Collection Vials (VACUTAINER) Plain/EDTA
Blood collection and storage is done is special tubes which allow the preservation of the blood sample over long periods.
These tubes can be made of glass or plastic and the caps of these vials are coloured to indicate the additives in them.
Some of the additives are anticoagulants such as EDTA, sodium citrate or heparin.
Other substances include preservatives. The containers containing coagulants are capped with gold, red or orange caps.
The ones containing anti-coagulants are green, which contain heparin, purple or lavender indicates ones which contain EDTA, grey capped tubes contain sodium fluoride or oxalate. Blood collection tubes (also called as vacutainers) are extensively used in hospitals, medical centres and diagnostic centres.
In biological labs, it is used in experiments like haemolysis etc.
Non Vacuum Vials (Pk of 100)
Vacuum Vials (Pk of 100)
Parallelogram of Forces Apparatus
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Acrylic Ray Optics Set
Animal Cage Polypropylene with S.S.Grill & with Water Bottle
Description
Animal Cage Polypropylene With S.S.Grill & Water Bottle. Mice / Rat breeding cage, Easy clean cage made of high grade polypropylene. Sufficient ventilation in the cage through Stainless steel wire top securely fixed to the cage with tight closing clips. Space in the grill for placing water bottle and food items. Size : 430 x 270 x 150 mm Size : 435 x 290 x 150 mm Size : 290 x 220 x 140 mm
Stand For Optical Bench Accessories
Monocot Stem Anatomy T.S &L.S
Description
This model exhibits the various tissues and the scattered, closed and collateral vascular bundles in transverse and longitudinal sections in maize. The large pitted vessels, spiral and annular vessels show the cell wall thickenings in L.S. Useful model for teaching anatomy of monocot stem. Mounted on base with keycard.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Evolution
Single Phase Bridge Firing Circuit
Specification
• Line synchronized IC based linear firing circuit for SCR applications. • Line synchronization achieved by 230 / 9V step down transformer. • Four nos. firing pulses to trigger four SCRs. • 1:1:1 Pulse transformer used for gate pulse isolation. • One no. potentiometer used to vary the firing angle (180° - 0°). • All four pulses terminated on the front panel for external SCR device module interface. • Carrier logic circuit implemented for SCR self start, carrier frequency 4KHz. • Debounce logic circuit implemented for SCR gate pulse ON/OFF. • One no. toggle switch for gate pulse ON/OFF. • 230V, 5Hz AC input, fuse provided for over load protection. • One no. ON/OFF switch with LED indication for power ON/OFF. • Provision to control the firing angle through external 0 to 5V DC.
Metabolic Cage for Rat
Description
Animal waste is directed through a collection funnel and onto a linear diffuser guide. The diffuser guide allows solid matter to travel down the top ridges of a 50% incline, passing over a urine port, and into a fecal collection vessel. Liquid waste flows along grooves down the inclined diffuser guide, passing through the urine port, and into a urine collection vessel. A urine deflector prevents excess urine from splashing and contaminating fecal specimen. Separate urine and feces samples are collected in two separate tubes.Features
Reliable experiment results due to better separation efficiency Food hopper design reducing the access or stay of animal inside food hopper Practicality of use due to less components or parts| Minimal animal stress: | Sample removing is without stressing animal, access to all elements below the cage floor without disturbing animal |
| Durability: | Most components are made from autoclavable polycarbonate and S.S. 304 material |
| Versatility: | Unit accommodates various species with simple feeder and floor change Space saving |
| Economy: Few parts, simple and rapid assembling |
Components Included
Polycarbonate cage with lid
Polycarbonate collection funnel
S.S. 304 floor grill for Mice and Rat
Polycarbonate Linear diffuser guide
Urine collection tube P.P.
Feces collection tube P.P.
Polycarbonate water bottle 250ml with holder
Waste water collection tube P.P.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Tripple Prism Set
Bar Magnets
Description
Bar magnet pair with keeper Alnico Bar Magents (Pair) with spacer and keepers. Supplied in cardboard boxes Actual bars may be different size than stock photo. Bar Magnet Alnico (Pair) Size are mentions below which we have :- 38 x 10 x 5 mm (1.5") 50 x 10 x 5 mm (2") 75 x 10 x 5 mm (3") 100 x 10 x 5 mm (4") 150 x 10 x 5 mm (6")
Metal Rivets, Brass
Description
Supplied as rivets. Pk of 500gms. Brass,lead,aluminium,iron, For specific heat capacity experiments. Supplied as rivets. Packets of 500 grams.300 mm long x 3 mm dia. Supplied in packets of ten rods. Copper,iron,lead,aluminium,brass 300 mm long x 3 mm dia. Supplied in packets of ten rods.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
CAVITY BLOCK
Combined Object and Receiving Screen
Lymphatic System
Heat Transfer In Aagitated Vessel
The unit consists of a vessel with class wool insulation ail around. A helical coil made of copper is fixed inside the vessel. A motorized agitator is fixed at the center of the coil. The vessel is provided with an electric heater and a controller is also provided for vessel. Heater heats water in the jacket while cold water is circulated through coll. Temperature of circulated water and water In vessel Is measured and thus heat transfer coefficient at various agitator speeds can be determined.
SPECIFICATIONS:
1.Vessel approx. 20 lit. capacity, provided with glass wool insulation all around and electric heater at the bottom. 2.Agitator 150 mm dia, with 1/8 HP motor to drive the agitator. 3.Helical coil – 200 dia, 8 turns, made of 3/8″ dia. copper tube. 4.Controllers for heater and agitator motor. 5.Temp. Indicator for vessel water temperature and circulated water inlet and outlet.SERVICES REQUIRED:
1.Single phase 230V, 15 A stabilized supply. 2.Water flow at the rate of 4 to 5 lit. per min. 3.Suitable drain arrangement for water. 4.Floor area -1.5 mtr. X 1 mtr. X 1 mir height.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Human Larynx With Tongue
Description
Natural size, three parts. Larynx showing cartilages, ligaments, muscles, relief of mucous membrane and thyroid gland. Tongue showing front part of the lower jaw which is detachable and separates into two parts, median section, sublingual gland and sub mandible gland are shown. on base with key card.
V.D.R.L.Rotator (Variable Speed)
Suitable for VDRL and other agglutinating tests, blood grouping tests, for mixing of solutions in small flasks, beakers or bottles.
Platform size 300x300 mm. supplied with spring wire holder (2 nos) for holding flasks. Fixed or variable RPM range 180 RPM. with 60 min timer.
Workable on 220 v AC 50Hz single phase.
Optional
Digital R.P.M. indicator Digital timer (0-99 min.)
Burner Bunsen-Economy
Description
This is one of most inexpensive option without flame stabilizer. The burner tube is made of brass and mounted on pressed steel powder coated base. Base dia is 80 mm. overall height of burner is 135 mm burner tube dia 12 mm. Suitable for LPG / Butane gas.Burner Specifications :
Tube Dia. - 12 mm Height - 130 mm Weight - 160 g
Slip Creep Measurement Apparatus
The apparatus consists of a variable speed D.C. Motor, Driving pulley and Driven pulley of equal diameter. The pulleys are mounted on input shaft (Motor shaft) and output shaft. The driven pulley can slide on the base with bearing block to change initial tension in belt. Brake drum is mounted on output shaft helps to measure power output. The motor speed is varied by dimmerstat. A two channel RPM Indicator is provided to measure speeds of driven and driving pullies respectively.
Specifications:
1.D.C. Motor – 1 HP, 1500 RPM, variable speed. 2.Driving & Driven puilies of equal diameters. 3.Brake drum along with spring balance. 4.Fiat Belt of fixed length of following materials – (i)Fabric Belt (ii)Canvas Belt. (iii)Rubber Belt. 5.Belt tightening arrangement. 6.Speed Controller unit. 7.Two Channel digital RPM Indicator. 8.Stroboscope.Experimentation –
1. To measure co-efficient of friction between pulley material and different belt materials. 2. To measure power transmitted with varied belt tensions and plotting graph of (T1 – T2).Tension Characteristics. 3. To measure percentage slip at fixed belt tension by varying load on brake drum and plot graph of (T1-T2) Vs.percentage slip.i.e. Slip Characteristics. Finding a creep zone from graph. 4. To measure belt slip speed and observe the limiting value float at constant speed when the slip just starts.Service Required:
1.230 V.A.C. stabilized power supply 2.Space -. 1.5m x 1.5 m.
Kipps Apparatus
Kipp's Apparatus, made of Polyethylene has three main portions.
The top portion is fitted with thistle funnel and a bulb structure through which dilute acid can be poured, which reacts with a metal sulphide in the base of the apparatus.
H.S gas then evolved collects in the fitted with a self-lubricating PTFE plug.
The base is provided with a residual outlet fitted with a cap for easy cleaning.
Material : High Density Polyethylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Kipp's Apparatus 250 ml | 1 | |
| Kipp's Apparatus 500 ml | 1 | |
| Kipp's Apparatus 1000 ml | 1 |
